[PATCH 1/7] drm/tidss: Fix issue in irq handling causing irq-flood issue

Jon Cormier jcormier at criticallink.com
Mon Oct 21 15:19:08 UTC 2024


On Mon, Oct 21, 2024 at 10:08 AM Tomi Valkeinen <
tomi.valkeinen at ideasonboard.com> wrote:

> It has been observed that sometimes DSS will trigger an interrupt and
> the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
> VID level interrupt-statuses are zero.
>
> As the top level irqstatus is supposed to tell whether we have VP/VID
> interrupts, the thinking of the driver authors was that this particular
> case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
> bits which has corresponding interrupts in VP/VID status. So when this
> issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
> interrupt flood.
>
> It is unclear why the issue happens. It could be a race issue in the
> driver, but no such race has been found. It could also be an issue with
> the HW. However a similar case can be easily triggered by manually
> writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
> DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
> the bit, we get an interrupt flood.
>
> To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
> solution is that if the top level irqstatus is the one that triggers the
> interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
> unhandled if VP/VID interrupt statuses have bits set. However, testing
> shows that if any of the irqstatuses is set (i.e. even if
> DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
> interrupt.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
> Co-developed-by: Bin Liu <b-liu at ti.com>
> Signed-off-by: Bin Liu <b-liu at ti.com>
> Co-developed-by: Devarsh Thakkar <devarsht at ti.com>
> Signed-off-by: Devarsh Thakkar <devarsht at ti.com>
> Co-developed-by: Jonathan Cormier <jcormier at criticallink.com>
> Signed-off-by: Jonathan Cormier <jcormier at criticallink.com>
> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform
> Display SubSystem")
> Cc: stable at vger.kernel.org
> ---
>  drivers/gpu/drm/tidss/tidss_dispc.c | 12 ++++--------
>  1 file changed, 4 insertions(+), 8 deletions(-)
>

I assume a reviewed by doesn't make sense since I co-developed this patch
but adding my tested by, hopefully that makes sense.

Tested an equivalent patch for several weeks.
Tested-by: Jonathan Cormier <jcormier at criticallink.com>


>
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c
> b/drivers/gpu/drm/tidss/tidss_dispc.c
> index 1ad711f8d2a8..f81111067578 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc.c
> +++ b/drivers/gpu/drm/tidss/tidss_dispc.c
> @@ -780,24 +780,20 @@ static
>  void dispc_k3_clear_irqstatus(struct dispc_device *dispc, dispc_irq_t
> clearmask)
>  {
>         unsigned int i;
> -       u32 top_clear = 0;
>
>         for (i = 0; i < dispc->feat->num_vps; ++i) {
> -               if (clearmask & DSS_IRQ_VP_MASK(i)) {
> +               if (clearmask & DSS_IRQ_VP_MASK(i))
>                         dispc_k3_vp_write_irqstatus(dispc, i, clearmask);
> -                       top_clear |= BIT(i);
> -               }
>         }
>         for (i = 0; i < dispc->feat->num_planes; ++i) {
> -               if (clearmask & DSS_IRQ_PLANE_MASK(i)) {
> +               if (clearmask & DSS_IRQ_PLANE_MASK(i))
>                         dispc_k3_vid_write_irqstatus(dispc, i, clearmask);
> -                       top_clear |= BIT(4 + i);
> -               }
>         }
>         if (dispc->feat->subrev == DISPC_K2G)
>                 return;
>
> -       dispc_write(dispc, DISPC_IRQSTATUS, top_clear);
> +       /* always clear the top level irqstatus */
> +       dispc_write(dispc, DISPC_IRQSTATUS, dispc_read(dispc,
> DISPC_IRQSTATUS));
>
>         /* Flush posted writes */
>         dispc_read(dispc, DISPC_IRQSTATUS);
>
> --
> 2.43.0
>
>

-- 
Jonathan Cormier
Software Engineer

Voice:  315.425.4045 x222



http://www.CriticalLink.com <http://www.criticallink.com/>
6712 Brooklawn Parkway, Syracuse, NY 13211

<https://www.linkedin.com/company/critical-link-llc>
<https://twitter.com/Critical_Link>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20241021/29870318/attachment-0001.htm>


More information about the dri-devel mailing list