[PATCH drm-dp 3/4] drm/hisilicon/hibmc: add dp kapi moduel in hibmc drivers
s00452708
shiyongbang at huawei.com
Mon Oct 21 11:57:03 UTC 2024
Hi Dmitry,
Thanks for your advices, I'll resolve the problems you mentioned.
> On Mon, Sep 30, 2024 at 06:06:09PM +0800, shiyongbang wrote:
>> From: baihan li <libaihan at huawei.com>
>>
>> Build a kapi level that hibmc driver can enable dp by
>> calling these kapi functions.
>>
>> Signed-off-by: baihan li <libaihan at huawei.com>
>> ---
>> drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
>> .../gpu/drm/hisilicon/hibmc/dp/dp_config.h | 20 ++++++++
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c | 12 ++---
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h | 48 +++++++++++++++++++
>> 4 files changed, 75 insertions(+), 7 deletions(-)
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> index 94d77da88bbf..693036dfab52 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> @@ -1,5 +1,5 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
>> - dp/dp_aux.o dp/dp_link.o
>> + dp/dp_aux.o dp/dp_link.o dp/dp_kapi.o
>>
>> obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
>> new file mode 100644
>> index 000000000000..a6353a808cc4
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/* Copyright (c) 2024 Hisilicon Limited. */
>> +
>> +#ifndef DP_CONFIG_H
>> +#define DP_CONFIG_H
>> +
>> +#define DP_BPP 24
>> +#define DP_SYMBOL_PER_FCLK 4
>> +#define DP_MIN_PULSE_NUM 0x9
>> +#define DP_MSA1 0x20
>> +#define DP_MSA2 0x845c00
>> +#define DP_OFFSET 0x1e0000
>> +#define DP_HDCP 0x2
>> +#define DP_INT_RST 0xffff
>> +#define DP_DPTX_RST 0x3ff
>> +#define DP_CLK_EN 0x7
>> +#define DP_SYNC_EN_MASK 0x3
>> +#define DP_LINK_RATE_CAL 27
> I think some of these defines were used in previous patches. Please make
> sure that at each step the code builds without errors.
>
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
>> index 4091723473ad..ca7edc69427c 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.c
>> @@ -64,12 +64,12 @@ static void hibmc_dp_set_tu(struct hibmc_dp_dev *dp, struct dp_mode *mode)
>> rate_ks = dp->link.cap.link_rate * DP_LINK_RATE_CAL;
>> value = (pixel_clock * bpp * 5000) / (61 * lane_num * rate_ks);
>>
>> - if (value % 10 == 9) { /* 10: div, 9: carry */
>> - tu_symbol_size = value / 10 + 1; /* 10: div */
>> + if (value % 10 == 9) { /* 9 carry */
>> + tu_symbol_size = value / 10 + 1;
>> tu_symbol_frac_size = 0;
>> } else {
>> - tu_symbol_size = value / 10; /* 10: div */
>> - tu_symbol_frac_size = value % 10 + 1; /* 10: div */
>> + tu_symbol_size = value / 10;
>> + tu_symbol_frac_size = value % 10 + 1;
>> }
>>
>> drm_info(dp->dev, "tu value: %u.%u value: %u\n",
>> @@ -158,7 +158,7 @@ static void hibmc_dp_link_cfg(struct hibmc_dp_dev *dp, struct dp_mode *mode)
>> dp_write_bits(dp->base + DP_VIDEO_CTRL,
>> DP_CFG_STREAM_HSYNC_POLARITY, mode->h_pol);
>>
>> - /* MSA mic 0 and 1*/
>> + /* MSA mic 0 and 1 */
>> writel(DP_MSA1, dp->base + DP_VIDEO_MSA1);
>> writel(DP_MSA2, dp->base + DP_VIDEO_MSA2);
>>
>> @@ -167,7 +167,7 @@ static void hibmc_dp_link_cfg(struct hibmc_dp_dev *dp, struct dp_mode *mode)
>> dp_write_bits(dp->base + DP_VIDEO_CTRL, DP_CFG_STREAM_RGB_ENABLE, 0x1);
>> dp_write_bits(dp->base + DP_VIDEO_CTRL, DP_CFG_STREAM_VIDEO_MAPPING, 0);
>>
>> - /*divide 2: up even */
>> + /* divide 2: up even */
>> if (timing_delay % 2)
>> timing_delay++;
>>
> This should be squashed into the previous commits.
>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
>> new file mode 100644
>> index 000000000000..6b07642d55b8
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_kapi.h
>> @@ -0,0 +1,48 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/* Copyright (c) 2024 Hisilicon Limited. */
>> +
>> +#ifndef DP_KAPI_H
>> +#define DP_KAPI_H
>> +
>> +#include <linux/types.h>
>> +#include <drm/drm_device.h>
>> +#include <drm/drm_encoder.h>
>> +#include <drm/drm_connector.h>
>> +#include <drm/drm_print.h>
>> +#include <linux/delay.h>
> Sort the headers, please.
>
>> +
>> +struct hibmc_dp_dev;
>> +
>> +struct dp_mode {
>> + u32 h_total;
>> + u32 h_active;
>> + u32 h_blank;
>> + u32 h_front;
>> + u32 h_sync;
>> + u32 h_back;
>> + bool h_pol;
>> + u32 v_total;
>> + u32 v_active;
>> + u32 v_blank;
>> + u32 v_front;
>> + u32 v_sync;
>> + u32 v_back;
>> + bool v_pol;
>> + u32 field_rate;
>> + u32 pixel_clock; // khz
> Why do you need a separate struct for this?
> I can try to use drm_mode function and refactor this struct, but they're insufficient for ourscenarios.Here's change template bellow: struct dp_mode { sturct
> videomode mode; u32 h_total; u32 h_blank; u32 v_total; u32 v_blank;
> u32 field_rate; }; static void dp_mode_cfg(struct dp_mode *dp_mode,
> struct drm_display_mode *mode) { dp_mode->field_rate =
> drm_mode_vrefresh(mode); drm_display_mode_to_videomode(mode,
> &dp_mode->vmode); dp_mode->h_total = mode->htotal; dp_mode->h_blank =
> mode->htotal - mode->hdisplay; dp_mode->v_total = mode->vtotal;
> dp_mode->v_blank = mode->vtotal - mode->vdisplay; }
>> +};
>> +
>> +struct hibmc_dp {
>> + struct hibmc_dp_dev *dp_dev;
>> + struct drm_device *drm_dev;
>> + struct drm_encoder encoder;
>> + struct drm_connector connector;
>> + void __iomem *mmio;
>> +};
>> +
>> +int hibmc_dp_kapi_init(struct hibmc_dp *dp);
>> +void hibmc_dp_kapi_uninit(struct hibmc_dp *dp);
>> +int hibmc_dp_mode_set(struct hibmc_dp *dp, struct dp_mode *mode);
>> +void hibmc_dp_display_en(struct hibmc_dp *dp, bool enable);
> It looks like this should also be defined earlier.
>
>> +
>> +#endif
>> --
>> 2.33.0
>>
More information about the dri-devel
mailing list