[PATCH v2 5/5] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
Neil Armstrong
neil.armstrong at linaro.org
Wed Oct 23 07:47:26 UTC 2024
On 22/10/2024 23:33, Jakob Hauser wrote:
> The way of implementing a flip option follows the existing
> panel-samsung-s6e8aa0.c [1][2][3].
>
> The value to flip the screen is taken from a downstream kernel file of
> a similar but older panel [4]. The mipi clock [5] for the new panel
> samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the
> 0xcb values corresponds to revision R01 of that older panel [6]. Although
> for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this
> older driver it seems to be the other way around. Further up there is a
> hint [7] basically saying for revision R01 to change the first word of the
> 0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that
> word. This causes a horizontal flip.
>
> [1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103
> [2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211
> [3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974
> [4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c
> [5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028
> [6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151
> [7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74
>
> Signed-off-by: Jakob Hauser <jahau at rocketmail.com>
> ---
> .../drm/panel/panel-samsung-s6e88a0-ams427ap24.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
> index 6e02b881434d..8372d0d307c8 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c
> @@ -32,6 +32,7 @@ struct s6e88a0_ams427ap24 {
> struct mipi_dsi_device *dsi;
> struct regulator_bulk_data *supplies;
> struct gpio_desc *reset_gpio;
> + bool flip_horizontal;
> };
>
> const struct regulator_bulk_data s6e88a0_ams427ap24_supplies[] = {
> @@ -538,6 +539,10 @@ static int s6e88a0_ams427ap24_on(struct s6e88a0_ams427ap24 *ctx)
> mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcc, 0x4c);
> mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf2, 0x03, 0x0d);
> mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf1, 0xa5, 0xa5);
> +
> + if (ctx->flip_horizontal)
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcb, 0x0e);
> +
> mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
> mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfc, 0xa5, 0xa5);
>
> @@ -672,6 +677,15 @@ static int s6e88a0_ams427ap24_register_backlight(struct s6e88a0_ams427ap24 *ctx)
> return ret;
> }
>
> +static void s6e88a0_ams427ap24_parse_dt(struct s6e88a0_ams427ap24 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + struct device_node *np = dev->of_node;
> +
> + ctx->flip_horizontal = of_property_read_bool(np, "flip-horizontal");
Please use device_property_read_bool() instead
> +}
> +
> static int s6e88a0_ams427ap24_probe(struct mipi_dsi_device *dsi)
> {
> struct device *dev = &dsi->dev;
> @@ -706,6 +720,8 @@ static int s6e88a0_ams427ap24_probe(struct mipi_dsi_device *dsi)
> DRM_MODE_CONNECTOR_DSI);
> ctx->panel.prepare_prev_first = true;
>
> + s6e88a0_ams427ap24_parse_dt(ctx);
I don't think this deserves a separate function, just move it probe.
> +
> ret = s6e88a0_ams427ap24_register_backlight(ctx);
> if (ret < 0)
> return ret;
With that changed:
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the dri-devel
mailing list