[PATCH v3 2/3] arm64: dts: zynqmp: Add DMA for DP audio
Tomi Valkeinen
tomi.valkeinen at ideasonboard.com
Wed Oct 23 12:00:22 UTC 2024
Hi Michal,
On 08/10/2024 11:22, Michal Simek wrote:
>
>
> On 9/10/24 13:19, Tomi Valkeinen wrote:
>> Add the two DMA channels used for the DisplayPort audio to the
>> zynqmp_dpsub node.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
>> ---
>> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/
>> dts/xilinx/zynqmp.dtsi
>> index b1b31dcf6291..673ca8422e6b 100644
>> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> @@ -1207,11 +1207,14 @@ zynqmp_dpsub: display at fd4a0000 {
>> "dp_vtc_pixel_clk_in";
>> power-domains = <&zynqmp_firmware PD_DP>;
>> resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
>> - dma-names = "vid0", "vid1", "vid2", "gfx0";
>> + dma-names = "vid0", "vid1", "vid2", "gfx0",
>> + "aud0", "aud1";
>> dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
>> <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
>> <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
>> - <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
>> ports {
>> #address-cells = <1>;
>>
>
> Acked-by: Michal Simek <michal.simek at amd.com>
>
> If you want me to take this patch via my tree please let me know.
Thanks. I've sent a v4, but no changes to this patch.
I'm not sure what is the custom with xilinx dts changes. With the other
platforms dts changes have always gone through a single tree, not via
driver trees.
I don't have a preference either way, so if there's no clear rule here,
I can take this one with the other patches.
Tomi
More information about the dri-devel
mailing list