[PATCH v2 17/36] drm/vc4: txp: Handle 40-bits DMA Addresses
Dave Stevenson
dave.stevenson at raspberrypi.com
Fri Oct 25 17:15:48 UTC 2024
From: Maxime Ripard <mripard at kernel.org>
The BCM2712 MOP and MOPLET can handle addresses larger than 32bits
through an extra register. We can easily support it and make it
conditional based on the compatible through a boolean in our variant
structure.
Signed-off-by: Maxime Ripard <mripard at kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_drv.h | 2 ++
drivers/gpu/drm/vc4/vc4_txp.c | 12 +++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 984fddae0048..34e72e711a17 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -538,8 +538,10 @@ struct vc4_crtc_data {
struct vc4_txp_data {
struct vc4_crtc_data base;
+ unsigned int high_addr_ptr_reg;
unsigned int has_byte_enable:1;
unsigned int size_minus_one:1;
+ unsigned int supports_40bit_addresses:1;
};
extern const struct vc4_txp_data bcm2835_txp_data;
diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
index d2ee872e9c0b..c2726ccde1cf 100644
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -145,6 +145,9 @@
/* Number of lines received and committed to memory. */
#define TXP_PROGRESS 0x10
+#define TXP_DST_PTR_HIGH_MOPLET 0x1c
+#define TXP_DST_PTR_HIGH_MOP 0x24
+
#define TXP_READ(offset) \
({ \
kunit_fail_current_test("Accessing a register in a unit test!\n"); \
@@ -293,6 +296,7 @@ static void vc4_txp_connector_atomic_commit(struct drm_connector *conn,
struct drm_framebuffer *fb;
unsigned int hdisplay;
unsigned int vdisplay;
+ dma_addr_t addr;
u32 ctrl;
int idx;
int i;
@@ -330,7 +334,13 @@ static void vc4_txp_connector_atomic_commit(struct drm_connector *conn,
return;
gem = drm_fb_dma_get_gem_obj(fb, 0);
- TXP_WRITE(TXP_DST_PTR, gem->dma_addr + fb->offsets[0]);
+ addr = gem->dma_addr + fb->offsets[0];
+
+ TXP_WRITE(TXP_DST_PTR, lower_32_bits(addr));
+
+ if (txp_data->supports_40bit_addresses)
+ TXP_WRITE(txp_data->high_addr_ptr_reg, upper_32_bits(addr) & 0xff);
+
TXP_WRITE(TXP_DST_PITCH, fb->pitches[0]);
hdisplay = mode->hdisplay ?: 1;
--
2.34.1
More information about the dri-devel
mailing list