[PATCH v4 7/7] drm/xe/pf: Set VF LMEM BAR size
Michał Winiarski
michal.winiarski at intel.com
Fri Oct 25 21:50:38 UTC 2024
LMEM is partitioned between multiple VFs and we expect that the more
VFs we have, the less LMEM is assigned to each VF.
This means that we can achieve full LMEM BAR access without the need to
attempt full VF LMEM BAR resize via pci_resize_resource().
Always set the largest possible BAR size that allows to fit the number
of enabled VFs.
Signed-off-by: Michał Winiarski <michal.winiarski at intel.com>
---
drivers/gpu/drm/xe/regs/xe_bars.h | 1 +
drivers/gpu/drm/xe/xe_pci_sriov.c | 22 ++++++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/xe/regs/xe_bars.h b/drivers/gpu/drm/xe/regs/xe_bars.h
index ce05b6ae832f1..880140d6ccdca 100644
--- a/drivers/gpu/drm/xe/regs/xe_bars.h
+++ b/drivers/gpu/drm/xe/regs/xe_bars.h
@@ -7,5 +7,6 @@
#define GTTMMADR_BAR 0 /* MMIO + GTT */
#define LMEM_BAR 2 /* VRAM */
+#define VF_LMEM_BAR 9 /* VF VRAM */
#endif
diff --git a/drivers/gpu/drm/xe/xe_pci_sriov.c b/drivers/gpu/drm/xe/xe_pci_sriov.c
index aaceee748287e..57cdeb41ef1d9 100644
--- a/drivers/gpu/drm/xe/xe_pci_sriov.c
+++ b/drivers/gpu/drm/xe/xe_pci_sriov.c
@@ -3,6 +3,10 @@
* Copyright © 2023-2024 Intel Corporation
*/
+#include <linux/bitops.h>
+#include <linux/pci.h>
+
+#include "regs/xe_bars.h"
#include "xe_assert.h"
#include "xe_device.h"
#include "xe_gt_sriov_pf_config.h"
@@ -62,6 +66,18 @@ static void pf_reset_vfs(struct xe_device *xe, unsigned int num_vfs)
xe_gt_sriov_pf_control_trigger_flr(gt, n);
}
+static int resize_vf_vram_bar(struct xe_device *xe, int num_vfs)
+{
+ struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
+ u32 sizes;
+
+ sizes = pci_iov_vf_bar_get_sizes(pdev, VF_LMEM_BAR, num_vfs);
+ if (!sizes)
+ return 0;
+
+ return pci_iov_vf_bar_set_size(pdev, VF_LMEM_BAR, __fls(sizes));
+}
+
static int pf_enable_vfs(struct xe_device *xe, int num_vfs)
{
struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
@@ -88,6 +104,12 @@ static int pf_enable_vfs(struct xe_device *xe, int num_vfs)
if (err < 0)
goto failed;
+ if (IS_DGFX(xe)) {
+ err = resize_vf_vram_bar(xe, num_vfs);
+ if (err)
+ xe_sriov_info(xe, "Failed to set VF LMEM BAR size: %d\n", err);
+ }
+
err = pci_enable_sriov(pdev, num_vfs);
if (err < 0)
goto failed;
--
2.47.0
More information about the dri-devel
mailing list