[RFC PATCH 09/10] dt-bindings: lcdif: add 'fsl,boot-on' property

[Dario Binacchi]

The property states that the (e)LCDIF display controller has been
initialized and left on by the bootloader. This information becomes
relevant in the case of supporting the simple framebuffer.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 Documentation/devicetree/bindings/display/fsl,lcdif.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 8e3a98aeec32..937f108daacb 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -71,6 +71,11 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description: The LCDIF output port
 
+  fsl,boot-on:
+    description: |
+      The controller has been initialized and left on by the bootloader/firmware.
+    type: boolean
+
 required:
   - compatible
   - reg
-- 
2.43.0