[RFC PATCH 00/10] Support simple-framebuffer on imx8m

[Maxime Ripard]

Hi,

On Mon, Oct 28, 2024 at 11:25:23AM +0100, Dario Binacchi wrote:
> This series is the Linux counterpart of what was sent to U-Boot [1]
> for the support of the simple-framebuffer for the BSH SMM S2Pro board.

I'm confused. simple-framebuffer is a mechanism for which the entire
point is that the kernel doesn't need the driver for.

Why do you need to have patches for bridges and panels for
simple-framebuffer? They won't be used.

> The need to avoid re-initializing the hardware (power domains,
> controllers, bridges, display panels) that has already been initialized
> and kept powered on by the bootloader has required updating more than
> one YAML file, with the addition of boolean properties to inform the
> driver that the corresponding hardware has been initialized and left
> on by the bootloader. All these properties are added on the fly by the
> bootloader to the various relevant nodes.

So it's not about simple-framebuffer at all, but rather that you don't
want to re-initialize the hardware that has already been setup?

If so, this isn't how you should do it, but rather:
https://lore.kernel.org/all/CAKMK7uHtqHy_oz4W7F+hmp9iqp7W5Ra8CxPvJ=9BwmvfU-O0gg@mail.gmail.com/

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 273 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20241028/959e9097/attachment-0001.sig>