[RFC PATCH] drm/bridge: panel: Use devm_drm_bridge_add()
Fei Shao
fshao at chromium.org
Tue Oct 29 14:53:49 UTC 2024
On Thu, Oct 24, 2024 at 8:36 PM Maxime Ripard <mripard at kernel.org> wrote:
>
> On Wed, Oct 09, 2024 at 01:23:31PM +0800, Fei Shao wrote:
> > In the mtk_dsi driver, its DSI host attach callback calls
> > devm_drm_of_get_bridge() to get the next bridge. If that next bridge is
> > a panel bridge, a panel_bridge object is allocated and managed by the
> > panel device.
> >
> > Later, if the attach callback fails with -EPROBE_DEFER from subsequent
> > component_add(), the panel device invoking the callback at probe time
> > also fails, and all device-managed resources are freed accordingly.
> >
> > This exposes a drm_bridge bridge_list corruption due to the unbalanced
> > lifecycle between the DSI host and the panel devices: the panel_bridge
> > object managed by panel device is freed, while drm_bridge_remove() is
> > bound to DSI host device and never gets called.
> > The next drm_bridge_add() will trigger UAF against the freed bridge list
> > object and result in kernel panic.
> >
> > This bug is observed on a MediaTek MT8188-based Chromebook with MIPI DSI
> > outputting to a DSI panel (DT is WIP for upstream).
> >
> > As a fix, using devm_drm_bridge_add() with the panel device in the panel
> > path seems reasonable. This also implies a chain of potential cleanup
> > actions:
> >
> > 1. Removing drm_bridge_remove() means devm_drm_panel_bridge_release()
> > becomes hollow and can be removed.
> >
> > 2. devm_drm_panel_bridge_add_typed() is almost emptied except for the
> > `bridge->pre_enable_prev_first` line. Itself can be also removed if
> > we move the line into drm_panel_bridge_add_typed(). (maybe?)
> >
> > 3. drm_panel_bridge_add_typed() now calls all the needed devm_* calls,
> > so it's essentially the new devm_drm_panel_bridge_add_typed().
> >
> > 4. drmm_panel_bridge_add() needs to be updated accordingly since it
> > calls drm_panel_bridge_add_typed(). But now there's only one bridge
> > object to be freed, and it's already being managed by panel device.
> > I wonder if we still need both drmm_ and devm_ version in this case.
> > (maybe yes from DRM PoV, I don't know much about the context)
> >
> > This is a RFC patch since I'm not sure if my understanding is correct
> > (for both the fix and the cleanup). It fixes the issue I encountered,
> > but I don't expect it to be picked up directly due to the redundant
> > commit message and the dangling devm_drm_panel_bridge_release().
> > I plan to resend the official patch(es) once I know what I supposed to
> > do next.
> >
> > For reference, here's the KASAN report from the device:
> > ==================================================================
> > BUG: KASAN: slab-use-after-free in drm_bridge_add+0x98/0x230
> > Read of size 8 at addr ffffff80c4e9e100 by task kworker/u32:1/69
> >
> > CPU: 1 UID: 0 PID: 69 Comm: kworker/u32:1 Not tainted 6.12.0-rc1-next-20241004-kasan-00030-g062135fa4046 #1
> > Hardware name: Google Ciri sku0/unprovisioned board (DT)
> > Workqueue: events_unbound deferred_probe_work_func
> > Call trace:
> > dump_backtrace+0xfc/0x140
> > show_stack+0x24/0x38
> > dump_stack_lvl+0x40/0xc8
> > print_report+0x140/0x700
> > kasan_report+0xcc/0x130
> > __asan_report_load8_noabort+0x20/0x30
> > drm_bridge_add+0x98/0x230
> > devm_drm_panel_bridge_add_typed+0x174/0x298
> > devm_drm_of_get_bridge+0xe8/0x190
> > mtk_dsi_host_attach+0x130/0x2b0
> > mipi_dsi_attach+0x8c/0xe8
> > hx83102_probe+0x1a8/0x368
> > mipi_dsi_drv_probe+0x6c/0x88
> > really_probe+0x1c4/0x698
> > __driver_probe_device+0x160/0x298
> > driver_probe_device+0x7c/0x2a8
> > __device_attach_driver+0x2a0/0x398
> > bus_for_each_drv+0x198/0x200
> > __device_attach+0x1c0/0x308
> > device_initial_probe+0x20/0x38
> > bus_probe_device+0x11c/0x1f8
> > deferred_probe_work_func+0x80/0x250
> > worker_thread+0x9b4/0x2780
> > kthread+0x274/0x350
> > ret_from_fork+0x10/0x20
> >
> > Allocated by task 69:
> > kasan_save_track+0x40/0x78
> > kasan_save_alloc_info+0x44/0x58
> > __kasan_kmalloc+0x84/0xa0
> > __kmalloc_node_track_caller_noprof+0x228/0x450
> > devm_kmalloc+0x6c/0x288
> > devm_drm_panel_bridge_add_typed+0xa0/0x298
> > devm_drm_of_get_bridge+0xe8/0x190
> > mtk_dsi_host_attach+0x130/0x2b0
> > mipi_dsi_attach+0x8c/0xe8
> > hx83102_probe+0x1a8/0x368
> > mipi_dsi_drv_probe+0x6c/0x88
> > really_probe+0x1c4/0x698
> > __driver_probe_device+0x160/0x298
> > driver_probe_device+0x7c/0x2a8
> > __device_attach_driver+0x2a0/0x398
> > bus_for_each_drv+0x198/0x200
> > __device_attach+0x1c0/0x308
> > device_initial_probe+0x20/0x38
> > bus_probe_device+0x11c/0x1f8
> > deferred_probe_work_func+0x80/0x250
> > worker_thread+0x9b4/0x2780
> > kthread+0x274/0x350
> > ret_from_fork+0x10/0x20
> >
> > Freed by task 69:
> > kasan_save_track+0x40/0x78
> > kasan_save_free_info+0x58/0x78
> > __kasan_slab_free+0x48/0x68
> > kfree+0xd4/0x750
> > devres_release_all+0x144/0x1e8
> > really_probe+0x48c/0x698
> > __driver_probe_device+0x160/0x298
> > driver_probe_device+0x7c/0x2a8
> > __device_attach_driver+0x2a0/0x398
> > bus_for_each_drv+0x198/0x200
> > __device_attach+0x1c0/0x308
> > device_initial_probe+0x20/0x38
> > bus_probe_device+0x11c/0x1f8
> > deferred_probe_work_func+0x80/0x250
> > worker_thread+0x9b4/0x2780
> > kthread+0x274/0x350
> > ret_from_fork+0x10/0x20
> >
> > The buggy address belongs to the object at ffffff80c4e9e000
> > which belongs to the cache kmalloc-4k of size 4096
> > The buggy address is located 256 bytes inside of
> > freed 4096-byte region [ffffff80c4e9e000, ffffff80c4e9f000)
> >
> > The buggy address belongs to the physical page:
> > head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
> > flags: 0x8000000000000040(head|zone=2)
> > page_type: f5(slab)
> > page: refcount:1 mapcount:0 mapping:0000000000000000
> > index:0x0 pfn:0x104e98
> > raw: 8000000000000040 ffffff80c0003040 dead000000000122 0000000000000000
> > raw: 0000000000000000 0000000000040004 00000001f5000000 0000000000000000
> > head: 8000000000000040 ffffff80c0003040 dead000000000122 0000000000000000
> > head: 0000000000000000 0000000000040004 00000001f5000000 0000000000000000
> > head: 8000000000000003 fffffffec313a601 ffffffffffffffff 0000000000000000
> > head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
> > page dumped because: kasan: bad access detected
> >
> > Memory state around the buggy address:
> > ffffff80c4e9e000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > ffffff80c4e9e080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > >ffffff80c4e9e100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > ^
> > ffffff80c4e9e180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > ffffff80c4e9e200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > ===================================================================
> >
> > Signed-off-by: Fei Shao <fshao at chromium.org>
>
> I was looking at the driver to try to follow your (awesome btw, thanks)
> commit log, and it does have a quite different structure compared to
> what we recommend.
>
> Would following
> https://docs.kernel.org/gpu/drm-kms-helpers.html#special-care-with-mipi-dsi-bridges
> help?
Hi Maxime,
Thank you for the pointer.
I read the suggested pattern in the doc and compared it with the
drivers. If I understand correctly, both the MIPI-DSI host and panel
drivers follow the instructions:
1. The MIPI-DSI host driver must run mipi_dsi_host_register() in its probe hook.
>> drm/mediatek/mtk_dsi.c runs mipi_dsi_host_register() in the probe hook.
2. In its probe hook, the bridge driver must try to find its MIPI-DSI
host, register as a MIPI-DSI device and attach the MIPI-DSI device to
its host.
>> drm/panel/panel-himax-hx83102.c follows and runs
mipi_dsi_attach() at the end of probe hook.
3. In its struct mipi_dsi_host_ops.attach hook, the MIPI-DSI host can
now add its component.
>> drm/mediatek/mtk_dsi.c calls component_add() in the attach callback.
Could you elaborate on the "different structures" you mentioned?
To clarify my point: the issue is that component_add() may return
-EPROBE_DEFER if the component (e.g. DSI encoder) is not ready,
causing the panel bridge to be removed. However, drm_bridge_remove()
is bound to MIPI-DSI host instead of panel bridge, which owns the
actual list_head object.
This might be reproducible with other MIPI-DSI host + panel
combinations by forcibly returning -EPROBE_DEFER in the host attach
hook (verification with another device is needed), so the fix may be
required in drm/bridge/panel.c.
And to Chen-Yu: Thanks for the suggestion. I'll incorporate that into
v2 pending confirmation that it is the correct fix.
Regards,
Fei
>
> Maxime
More information about the dri-devel
mailing list