[PATCH 1/3] drm/bridge: microchip-lvds: Revert clk_prepare_enable() in case of failure

[Dharma.B at microchip.com]

On 27/08/24 9:42 pm, Claudiu Beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> In case pm_runtime_get_sync() fails the clock remains enabled. Disable
> it to save power on this failure scenario.
> 
> Fixes: 179b0769fc5f ("drm/bridge: add lvds controller support for sam9x7")
> Signed-off-by: Claudiu Beznea <claudiu.beznea at tuxon.dev>
Reviewed-by: Dharma Balasubiramani <dharma.b at microchip.com>
Tested-by: Dharma Balasubiramani <dharma.b at microchip.com>
> ---
>   drivers/gpu/drm/bridge/microchip-lvds.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/bridge/microchip-lvds.c b/drivers/gpu/drm/bridge/microchip-lvds.c
> index b8313dad6072..027292ab0197 100644
> --- a/drivers/gpu/drm/bridge/microchip-lvds.c
> +++ b/drivers/gpu/drm/bridge/microchip-lvds.c
> @@ -125,6 +125,7 @@ static void mchp_lvds_enable(struct drm_bridge *bridge)
> 
>          ret = pm_runtime_get_sync(lvds->dev);
>          if (ret < 0) {
> +               clk_disable_unprepare(lvds->pclk);
>                  dev_err(lvds->dev, "failed to get pm runtime: %d\n", ret);
>                  return;
>          }
> --
> 2.39.2
> 


-- 
With Best Regards,
Dharma B.