[PATCH v5 0/2] Basic support for TI TDP158
Jani Nikula
jani.nikula at linux.intel.com
Tue Sep 3 15:30:27 UTC 2024
On Tue, 03 Sep 2024, Robert Foss <rfoss at kernel.org> wrote:
> On Mon, 12 Aug 2024 16:51:00 +0200, Marc Gonzalez wrote:
>> TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
>>
>> Like the TFP410, the TDP158 can be set up in 2 different ways:
>> 1) hard-coding its configuration settings using pin-strapping resistors
>> 2) placing it on an I2C bus, and defer set-up until run-time
>>
>> The mode is selected by pin 8 = I2C_EN
>> I2C_EN = 1 ==> I2C Control Mode
>> I2C_EN = 0 ==> Pin Strap Mode
>>
>> [...]
>
> Applied, thanks!
>
> [1/2] dt-bindings: display: bridge: add TI TDP158
> https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/887665792b99
> [2/2] drm/bridge: add support for TI TDP158
> https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/a15710027afb
Fails build with:
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_enable’:
../drivers/gpu/drm/bridge/ti-tdp158.c:31:9: error: implicit declaration of function ‘gpiod_set_value_cansleep’ [-Werror=implicit-function-declaration]
31 | gpiod_set_value_cansleep(tdp158->enable, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_probe’:
../drivers/gpu/drm/bridge/ti-tdp158.c:80:26: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration]
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~~~~~~~~~~~
| devm_regulator_get_optional
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function)
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: note: each undeclared identifier is reported only once for each function it appears in
BR,
Jani.
--
Jani Nikula, Intel
More information about the dri-devel
mailing list