[PATCH v6 3/3] drm/rockchip: Add basic RK3588 HDMI output support
Cristian Ciocaltea
cristian.ciocaltea at collabora.com
Wed Sep 11 01:51:39 UTC 2024
On 9/10/24 11:49 PM, Heiko Stübner wrote:
> Am Dienstag, 10. September 2024, 18:39:54 CEST schrieb Heiko Stübner:
>> Am Dienstag, 10. September 2024, 17:41:42 CEST schrieb Cristian Ciocaltea:
>>> On 9/10/24 6:21 PM, Heiko Stübner wrote:
>>>> Am Dienstag, 10. September 2024, 17:07:57 CEST schrieb Heiko Stübner:
>>>>> Am Freitag, 6. September 2024, 03:17:42 CEST schrieb Cristian Ciocaltea:
>>>>>> The RK3588 SoC family integrates the newer Synopsys DesignWare HDMI 2.1
>>>>>> Quad-Pixel (QP) TX controller IP and a HDMI/eDP TX Combo PHY based on a
>>>>>> Samsung IP block.
>>>>>>
>>>>>> Add just the basic support for now, i.e. RGB output up to 4K at 60Hz,
>>>>>> without audio, CEC or any of the HDMI 2.1 specific features.
>>>>>>
>>>>>> Co-developed-by: Algea Cao <algea.cao at rock-chips.com>
>>>>>> Signed-off-by: Algea Cao <algea.cao at rock-chips.com>
>>>>>> Tested-by: Heiko Stuebner <heiko at sntech.de>
>>>>>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>>>>>
>>>>> I had switched from the v3 to this v6 in my playground-kernel today,
>>>>> with v3 I've never seen those, but now with v6 I have gotten multiple
>>>>> times:
>>>>>
>>>>> [ 805.730608] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
>>>>> [ 805.739764] Modules linked in: snd_soc_simple_card crct10dif_ce snd_soc_simple_card_utils panthor drm_gpuvm drm_exec fuse
>>>>> [ 805.752031] CPU: 3 UID: 0 PID: 775 Comm: Xorg Not tainted 6.11.0-rc7-00099-g459302f1f908-dirty #934
>>>>> [ 805.762143] Hardware name: Theobroma Systems RK3588-Q7 SoM on Haikou devkit (DT)
>>>>> [ 805.770407] pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>>>> [ 805.778186] pc : regmap_mmio_read32le+0x8/0x20
>>>>> [ 805.783155] lr : regmap_mmio_read+0x44/0x70
>>>>> [ 805.787828] sp : ffff80008293b830
>>>>> [ 805.791516] x29: ffff80008293b830 x28: ffff80008293bce8 x27: ffff0001f20ab080
>>>>> [ 805.799495] x26: ffff800081139500 x25: 0000000000000000 x24: 0000000000000010
>>>>> [ 805.807472] x23: 0000000000000000 x22: ffff0001f5a4b400 x21: ffff80008293b8c4
>>>>> [ 805.815450] x20: 0000000000000968 x19: ffff0001f5a27a80 x18: 0000000000000070
>>>>> [ 805.823428] x17: 0002441400000005 x16: 000004650441043c x15: 0438000008980804
>>>>> [ 805.831406] x14: 07d8089807800780 x13: 0438000008980804 x12: ffff800081133630
>>>>> [ 805.839384] x11: 0002441400000005 x10: 000004650441043c x9 : ffff800081a59000
>>>>> [ 805.847361] x8 : 07d8089807800780 x7 : 0000000000000000 x6 : ffff0001f5b453c0
>>>>> [ 805.855339] x5 : ffff800080750dc0 x4 : 0000000000000968 x3 : 0000000000000968
>>>>> [ 805.863316] x2 : ffff800080751520 x1 : 0000000000000968 x0 : ffff800083b20968
>>>>> [ 805.871294] Call trace:
>>>>> [ 805.874012] regmap_mmio_read32le+0x8/0x20
>>>>> [ 805.878588] _regmap_bus_reg_read+0x6c/0xac
>>>>> [ 805.883262] _regmap_read+0x60/0xd8
>>>>> [ 805.887159] _regmap_update_bits+0xf4/0x140
>>>>> [ 805.891832] regmap_update_bits_base+0x64/0xa0
>>>>> [ 805.896797] dw_hdmi_qp_bridge_atomic_enable+0x134/0x220
>>>>> [ 805.902734] drm_atomic_bridge_chain_enable+0x54/0xc8
>>>>> [ 805.908380] drm_atomic_helper_commit_modeset_enables+0x194/0x280
>>>>> [ 805.915190] drm_atomic_helper_commit_tail_rpm+0x50/0xa0
>>>>> [ 805.921125] commit_tail+0xa0/0x1a0
>>>>> [ 805.925021] drm_atomic_helper_commit+0x17c/0x1b0
>>>>> [ 805.930276] drm_atomic_commit+0xb8/0x100
>>>>> [ 805.934754] drm_atomic_connector_commit_dpms+0xe0/0x110
>>>>> [ 805.940690] drm_mode_obj_set_property_ioctl+0x1c0/0x420
>>>>> [ 805.946626] drm_connector_property_set_ioctl+0x3c/0x68
>>>>> [ 805.952465] drm_ioctl_kernel+0xc0/0x130
>>>>> [ 805.956846] drm_ioctl+0x214/0x4a0
>>>>> [ 805.960643] __arm64_sys_ioctl+0xac/0xf8
>>>>> [ 805.965025] invoke_syscall+0x48/0x104
>>>>> [ 805.969214] el0_svc_common.constprop.0+0x40/0xe0
>>>>> [ 805.974470] do_el0_svc+0x1c/0x28
>>>>> [ 805.978171] el0_svc+0x34/0xe0
>>>>> [ 805.981582] el0t_64_sync_handler+0x120/0x12c
>>>>> [ 805.986449] el0t_64_sync+0x190/0x194
>>>>> [ 805.990540] Code: d503201f d503201f f9400000 8b214000 (b9400000)
>>>>>
>>>>> I guess that might be some clocking issue?
>>>>
>>>> Forgot to add, this happens when the display has blanked and then is
>>>> supposed to unblank again.
>>>
>>> Hmm, I've never encountered this while testing with my v6.11-rc1 based
>>> tree. What is your current kernel base? Did you change it while
>>> switching from v3 to v6?
>>>
>>> I'll rebase my tree onto latest linux-next and see if I can reproduce.
>>
>> The setup is 6.11-rc7 with your hdmi series + my wip dsi + X11 running
>> on top.
>>
>> At some point after being idle a while this blanks the display, which will
>> probably turn off clocks and such. After moving the mouse or just
>> doing anything else that unblanks the display, that splat happens.
>>
>> Apart from updating mesa from 24.2.0 to 24.2.2 I haven't changed
>> anything in my test-setup so far.
>
> So now I've re-tested all :-) ... test scenario was that I reverted the v6
> patches and then applied the older versions (and fixed up the dts if
> needed wrt the vo{1}-grf thing). So now really only the hdmi driver
> changed. So I booted, waited for the display to blank and hit reboot
> on the serial console:
>
> - v3 console output turned back on and rebooted fine
> - v4 console output turned back on and rebooted fine
> - v5 hit the error from above
> - v6 hit the error from above
>
> So something between v4 and v5 seems to cause the hickup.
Thanks a lot for taking the time to bisect it! This is indeed a clock
related regression introduced by the recent changes around scrambling.
I couldn't initially reproduce because I had the HDMI0 PHY clock provider
enabled, required to verify the high TMDS clock ratio and scrambling setup
in 4K at 60Hz display mode. Without that clock provider enabled, the PHY
eventually enters runtime PM suspend state, which for some reason causes
the splat when trying to access the LINK_CONFIG0 register.
To unblock the series, I would consider dropping the scrambling support for
now, as it turned to be far more complicated to have it properly handled
than I initially assumed. Will move this to a separate WIP patch in my dev
tree, along the vop2 improvements for display modes handling, and resubmit
as soon as I get this work in a better shape.
More information about the dri-devel
mailing list