[PATCH v2] drm/gma500: replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi

Thomas Zimmermann tzimmermann at suse.de
Thu Sep 12 09:26:31 UTC 2024


Hi

Am 12.09.24 um 10:56 schrieb Jani Nikula:
> On Thu, 12 Sep 2024, Jani Nikula <jani.nikula at linux.intel.com> wrote:
>> On Thu, 12 Sep 2024, Thomas Zimmermann <tzimmermann at suse.de> wrote:
>>> Hi
>>>
>>> Am 11.09.24 um 20:06 schrieb Tejas Vipin:
>>>> Replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi since
>>>> monitor HDMI information is available after EDID is parsed. Additionally
>>>> rewrite the code the code to have fewer indentation levels.
>>> The problem is that the entire logic is outdated. The content
>>> of cdv_hdmi_detect() should go into cdv_hdmi_get_modes(), the detect_ctx
>>> callback should be set to drm_connector_helper_detect_from_ddc() and
>>> cdv_hdmi_detect() should be deleted. The result is that ->detect_ctx
>>> will detect the presence of a display and ->get_modes will update EDID
>>> and other properties.
>> I guess I didn't get the memo on this one.
>>
>> What's the problem with reading the EDID at detect? The subsequent
>> drm_edid_connector_add_modes() called from .get_modes() does not need to
>> read the EDID again.
> Moreover, in this case .detect() only detects digital displays as
> reported by EDID. If you postpone that to .get_modes(), the probe helper
> will still report connected, and invent non-EDID fallback modes. The
> behaviour changes.

The change in behavior is intentional, because the current test seems 
arbitrary. Does the driver not work with analog outputs?

Best regards
Thomas

>
>> I think it should be fine to do incremental refactors like the patch at
>> hand (modulo some issues I mention below).
> Another issue in the patch is that it should also change .get_modes() to
> not read the EDID again, but just call drm_edid_connector_add_modes().
>
> BR,
> Jani.
>
>> BR,
>> Jani.
>>
>>
>>> Do you have  a device for testing such a change?
>>>
>>> Best regards
>>> Thomas
>>>
>>>> Signed-off-by: Tejas Vipin <tejasvipin76 at gmail.com>
>>>> ---
>>>> Changes in v2:
>>>>       - Use drm_edid instead of edid
>>>>
>>>> Link to v1: https://lore.kernel.org/all/20240910051856.700210-1-tejasvipin76@gmail.com/
>>>> ---
>>>>    drivers/gpu/drm/gma500/cdv_intel_hdmi.c | 24 +++++++++++++-----------
>>>>    1 file changed, 13 insertions(+), 11 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
>>>> index 2d95e0471291..701f8bbd5f2b 100644
>>>> --- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
>>>> +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
>>>> @@ -128,23 +128,25 @@ static enum drm_connector_status cdv_hdmi_detect(
>>>>    {
>>>>    	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
>>>>    	struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv;
>>>> -	struct edid *edid = NULL;
>>>> +	const struct drm_edid *drm_edid;
>>>> +	int ret;
>>>>    	enum drm_connector_status status = connector_status_disconnected;
>>>>    
>>>> -	edid = drm_get_edid(connector, connector->ddc);
>>>> +	drm_edid = drm_edid_read_ddc(connector, connector->ddc);
>> Just drm_edid_read() is enough when you're using connector->ddc.
>>
>>>> +	ret = drm_edid_connector_update(connector, drm_edid);
>>>>    
>>>>    	hdmi_priv->has_hdmi_sink = false;
>>>>    	hdmi_priv->has_hdmi_audio = false;
>>>> -	if (edid) {
>>>> -		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
>>>> -			status = connector_status_connected;
>>>> -			hdmi_priv->has_hdmi_sink =
>>>> -						drm_detect_hdmi_monitor(edid);
>>>> -			hdmi_priv->has_hdmi_audio =
>>>> -						drm_detect_monitor_audio(edid);
>>>> -		}
>>>> -		kfree(edid);
>>>> +	if (ret)
>> This error path leaks the EDID.
>>
>>>> +		return status;
>>>> +
>>>> +	if (drm_edid_is_digital(drm_edid)) {
>>>> +		status = connector_status_connected;
>>>> +		hdmi_priv->has_hdmi_sink = connector->display_info.is_hdmi;
>>>> +		hdmi_priv->has_hdmi_audio = connector->display_info.has_audio;
>>>>    	}
>>>> +	drm_edid_free(drm_edid);
>>>> +
>>>>    	return status;
>>>>    }
>>>>    

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)



More information about the dri-devel mailing list