[PATCH v2] drm/bridge: imx8mp-hdmi-tx: allow 0.5% margin with selected clock
Neil Armstrong
neil.armstrong at linaro.org
Fri Sep 13 07:44:19 UTC 2024
On 07/09/2024 07:54, Dominique Martinet wrote:
> From: Dominique Martinet <dominique.martinet at atmark-techno.com>
>
> This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we
> cannot output the exact frequency, enabling the imx8mp HDMI output to
> support more modes
>
> Tested-by: Adam Ford <aford173 at gmail.com> #imx8mp-beacon
> Reviewed-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> Tested-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> Signed-off-by: Dominique Martinet <dominique.martinet at atmark-techno.com>
> ---
> Changes in v2:
> - Improve comment about the tolerance
> - Link to v1: https://lore.kernel.org/r/20240904083103.1257480-1-dominique.martinet@atmark-techno.com
> ---
> drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> index 13bc570c5473..200d65184159 100644
> --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> @@ -23,6 +23,7 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
> const struct drm_display_mode *mode)
> {
> struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data;
> + long round_rate;
>
> if (mode->clock < 13500)
> return MODE_CLOCK_LOW;
> @@ -30,8 +31,14 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
> if (mode->clock > 297000)
> return MODE_CLOCK_HIGH;
>
> - if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) !=
> - mode->clock * 1000)
> + round_rate = clk_round_rate(hdmi->pixclk, mode->clock * 1000);
> + /* imx8mp's pixel clock generator (fsl-samsung-hdmi) cannot generate
> + * all possible frequencies, so allow some tolerance to support more
> + * modes.
> + * Allow 0.5% difference allowed in various standards (VESA, CEA861)
> + * 0.5% = 5/1000 tolerance (mode->clock is 1/1000)
> + */
> + if (abs(round_rate - mode->clock * 1000) > mode->clock * 5)
> return MODE_CLOCK_RANGE;
>
> /* We don't support double-clocked and Interlaced modes */
>
> ---
> base-commit: 67784a74e258a467225f0e68335df77acd67b7ab
> change-id: 20240907-hdmi-tolerance-4d83074a4517
>
> Best regards,
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the dri-devel
mailing list