[PATCH v2 03/10] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable

Neil Armstrong neil.armstrong at linaro.org
Fri Sep 13 08:05:52 UTC 2024


On 08/09/2024 15:28, Jonas Karlman wrote:
> Change to only call poweron/poweroff from atomic_enable/atomic_disable
> ops instead of trying to be clever by keeping a bridge_is_on state and
> poweron/off in the hotplug irq handler.
> 
> The bridge is already enabled/disabled depending on connection state
> with the call to drm_helper_hpd_irq_event() in hotplug irq handler.
> 
> A benefit of this is that drm mode_config mutex is always held at
> poweron/off, something that may reduce the need for our own mutex.
> 
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
> v2: Update commit message
> ---
>   drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 33 ++---------------------
>   1 file changed, 2 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 055fc9848df4..5b67640b1d0a 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -169,7 +169,6 @@ struct dw_hdmi {
>   	enum drm_connector_force force;	/* mutex-protected force state */
>   	struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */
>   	bool disabled;			/* DRM has disabled our bridge */
> -	bool bridge_is_on;		/* indicates the bridge is on */
>   	bool rxsense;			/* rxsense state */
>   	u8 phy_mask;			/* desired phy int mask settings */
>   	u8 mc_clkdis;			/* clock disable register */
> @@ -2382,8 +2381,6 @@ static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
>   
>   static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
>   {
> -	hdmi->bridge_is_on = true;
> -
>   	/*
>   	 * The curr_conn field is guaranteed to be valid here, as this function
>   	 * is only be called when !hdmi->disabled.
> @@ -2397,30 +2394,6 @@ static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
>   		hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
>   		hdmi->phy.enabled = false;
>   	}
> -
> -	hdmi->bridge_is_on = false;
> -}
> -
> -static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
> -{
> -	int force = hdmi->force;
> -
> -	if (hdmi->disabled) {
> -		force = DRM_FORCE_OFF;
> -	} else if (force == DRM_FORCE_UNSPECIFIED) {
> -		if (hdmi->rxsense)
> -			force = DRM_FORCE_ON;
> -		else
> -			force = DRM_FORCE_OFF;
> -	}
> -
> -	if (force == DRM_FORCE_OFF) {
> -		if (hdmi->bridge_is_on)
> -			dw_hdmi_poweroff(hdmi);
> -	} else {
> -		if (!hdmi->bridge_is_on)
> -			dw_hdmi_poweron(hdmi);
> -	}
>   }
>   
>   /*
> @@ -2545,7 +2518,6 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
>   
>   	mutex_lock(&hdmi->mutex);
>   	hdmi->force = connector->force;
> -	dw_hdmi_update_power(hdmi);
>   	dw_hdmi_update_phy_mask(hdmi);
>   	mutex_unlock(&hdmi->mutex);
>   }
> @@ -2954,7 +2926,7 @@ static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
>   	mutex_lock(&hdmi->mutex);
>   	hdmi->disabled = true;
>   	hdmi->curr_conn = NULL;
> -	dw_hdmi_update_power(hdmi);
> +	dw_hdmi_poweroff(hdmi);
>   	dw_hdmi_update_phy_mask(hdmi);
>   	handle_plugged_change(hdmi, false);
>   	mutex_unlock(&hdmi->mutex);
> @@ -2973,7 +2945,7 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
>   	mutex_lock(&hdmi->mutex);
>   	hdmi->disabled = false;
>   	hdmi->curr_conn = connector;
> -	dw_hdmi_update_power(hdmi);
> +	dw_hdmi_poweron(hdmi);
>   	dw_hdmi_update_phy_mask(hdmi);
>   	handle_plugged_change(hdmi, true);
>   	mutex_unlock(&hdmi->mutex);
> @@ -3072,7 +3044,6 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
>   		if (hpd)
>   			hdmi->rxsense = true;
>   
> -		dw_hdmi_update_power(hdmi);
>   		dw_hdmi_update_phy_mask(hdmi);
>   	}
>   	mutex_unlock(&hdmi->mutex);

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the dri-devel mailing list