[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it

[Geraldo Nascimento]

On Fri, Sep 13, 2024 at 10:12:39PM +0100, Hugh Cole-Baker wrote:
> I added printk to show the value of AUD_CONF2, and found that on 6.1.23, the
> value is 0 before the code in this patch sets the insert_pcuv bit. On 6.10.3
> the value is 4, i.e. insert_pcuv is already set.
> 
> According to the RK3399 TRM, the value-after-reset of the insert_pcuv bit is 1,
> so apparently on the 6.1.23 kernel something is clearing the bit after HW reset
> but before this driver sets the hw_params, and this patch sets it back to the
> correct value. On 6.10.3 the bit is not cleared, i.e. this patch is seemingly
> no longer necessary (but is a harmless no-op).

Hi Hugh,

Thank you for your extensive testing. It seems then there's no action we
need to take for mainline, as it's already fixed there.

> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h
> 
> btw, this patch doesn't apply without edits as these filenames are incorrect.
> 

Yeah, I see. My bad.

Thank you,
Geraldo Nascimento