[PATCH] drm/display/dsc: Refactor MST DSC Determination Policy
Jani Nikula
jani.nikula at intel.com
Fri Sep 20 05:56:10 UTC 2024
On Thu, 19 Sep 2024, Fangzhi Zuo <Jerry.Zuo at amd.com> wrote:
> [why]
> How we determine the dsc_aux used for dsc decompression in
> drm_dp_mst_dsc_aux_for_port() today having some defects:
>
> 1. The method how we determine a connected peer device is virtual or not
> in drm_dp_mst_is_virtual_dpcd() is not always correct. There are DP1.4 products
> in the market which don't fully comply with DP spec to enumerate virtual peer device.
> That leads to existing logic defects. For example:
>
> - Some 1.4 mst hubs with hdmi output port don't enumerate virtual dpcd/peer device.
> When probing the hub, its topology is constructed with a branch device only, with
> peer device type set as DP-to-Legacy converter for its HDMI output port.
> Under this condition, drm_dp_mst_is_virtual_dpcd() will still determine it's connected
> with a virtual peer device with virtual dpcd. And results in the section for
> analyzing DP-to-DP peer device case of drm_dp_mst_dsc_aux_for_port(). That's logically
> incorrect.
>
> 2. Existing routine is designed based on analyzing different connected peer device types, such
> as dp-dp, dp-hdmi peer device, and virtual sink. Such categorization is redundant and unnecessary.
> The key info of determining where to do dsc decompression relies on the dsc capability from dpcd
> only. No matter the mst branch device enumerates virtual dpcd or not, if it's supporting dsc, it
> must declare it's dsc capability at somewhere within its responded topology.
>
> 3. Synaptics quirk analyzing today is unnecessary as long as we determine dsc aux generically
> by dpcd info.
>
> Based on above, we would like to refactor the logic how we determine the dsc aux today a bit.
>
> [how]
> Ideally, dsc_aux should be determined by the topology connection status and
> dpcd capability info only. In this way, dsc aux could be determined in a more generic
> way, instead of enumerating and analyzing on different connected peer device types.
> We construct the refactored algorithm into 2 parts:
>
> 1. Firstly, deal with all known quirks or w/a for branch devices in the market that
> don't comply with DP spec and can't determine its dsc aux in a generic way.
> e.g. Force to pick root aux as the dsc decompression point.
>
> 2. Refine the dsc determination policy by generalizing detection solely based on
> topology connection status and dpcd info, instead of analyzing it by enumerating
> different connection types of the peer device.
>
> In addition, we add parsing vendor data 0x50C ~ 0x50F into dpcd quirk routine for
> expanding the ability to determine specific dock products that shall pick root aux as the
> dsc decompression point.
Too many changes in one patch. Please split up.
BR,
Jani.
>
> Signed-off-by: Fangzhi Zuo <Jerry.Zuo at amd.com>
> Signed-off-by: Wayne Lin <wayne.lin at amd.com>
> ---
> .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +-
> .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 20 +-
> .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 59 +---
> drivers/gpu/drm/display/drm_dp_helper.c | 30 +-
> drivers/gpu/drm/display/drm_dp_mst_topology.c | 259 ++++++++----------
> drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +-
> include/drm/display/drm_dp.h | 1 +
> include/drm/display/drm_dp_helper.h | 8 +
> include/drm/display/drm_dp_mst_helper.h | 5 +-
> 10 files changed, 181 insertions(+), 208 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
> index db56b0aa5454..0da703f4ccac 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
> @@ -1370,7 +1370,7 @@ static int dp_dsc_fec_support_show(struct seq_file *m, void *data)
> * enable DSC on the sink device or on MST branch
> * its connected to.
> */
> - if (aconnector->dsc_aux) {
> + if (aconnector->mst_output_port->dsc_aux) {
> is_fec_supported = true;
> is_dsc_supported = true;
> }
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> index 50109d13d967..f3613f38b9b8 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> @@ -806,20 +806,20 @@ bool dm_helpers_dp_write_dsc_enable(
> uint8_t ret = 0;
>
> if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
> - if (!aconnector->dsc_aux)
> + if (!aconnector->mst_output_port->dsc_aux)
> return false;
>
> // apply w/a to synaptics
> if (needs_dsc_aux_workaround(aconnector->dc_link) &&
> (aconnector->mst_downstream_port_present.byte & 0x7) != 0x3)
> return write_dsc_enable_synaptics_non_virtual_dpcd_mst(
> - aconnector->dsc_aux, stream, enable_dsc);
> + aconnector->mst_output_port->dsc_aux, stream, enable_dsc);
>
> port = aconnector->mst_output_port;
>
> if (enable) {
> - if (port->passthrough_aux) {
> - ret = drm_dp_dpcd_write(port->passthrough_aux,
> + if (port->dsc_passthrough_aux) {
> + ret = drm_dp_dpcd_write(port->dsc_passthrough_aux,
> DP_DSC_ENABLE,
> &enable_passthrough, 1);
> drm_dbg_dp(dev,
> @@ -827,24 +827,24 @@ bool dm_helpers_dp_write_dsc_enable(
> ret);
> }
>
> - ret = drm_dp_dpcd_write(aconnector->dsc_aux,
> + ret = drm_dp_dpcd_write(aconnector->mst_output_port->dsc_aux,
> DP_DSC_ENABLE, &enable_dsc, 1);
> drm_dbg_dp(dev,
> "MST_DSC Sent DSC decoding enable to %s port, ret = %u\n",
> - (port->passthrough_aux) ? "remote RX" :
> + (port->dsc_passthrough_aux) ? "remote RX" :
> "virtual dpcd",
> ret);
> } else {
> - ret = drm_dp_dpcd_write(aconnector->dsc_aux,
> + ret = drm_dp_dpcd_write(aconnector->mst_output_port->dsc_aux,
> DP_DSC_ENABLE, &enable_dsc, 1);
> drm_dbg_dp(dev,
> "MST_DSC Sent DSC decoding disable to %s port, ret = %u\n",
> - (port->passthrough_aux) ? "remote RX" :
> + (port->dsc_passthrough_aux) ? "remote RX" :
> "virtual dpcd",
> ret);
>
> - if (port->passthrough_aux) {
> - ret = drm_dp_dpcd_write(port->passthrough_aux,
> + if (port->dsc_passthrough_aux) {
> + ret = drm_dp_dpcd_write(port->dsc_passthrough_aux,
> DP_DSC_ENABLE,
> &enable_passthrough, 1);
> drm_dbg_dp(dev,
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> index 6b5eed37532b..61ee3c38a29a 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> @@ -183,8 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
> dc_sink_release(dc_sink);
> aconnector->dc_sink = NULL;
> aconnector->edid = NULL;
> - aconnector->dsc_aux = NULL;
> - port->passthrough_aux = NULL;
> + aconnector->mst_output_port->dsc_aux = NULL;
> + aconnector->mst_output_port->dsc_passthrough_aux = NULL;
> }
>
> aconnector->mst_status = MST_STATUS_DEFAULT;
> @@ -214,21 +214,6 @@ bool needs_dsc_aux_workaround(struct dc_link *link)
> }
>
> #if defined(CONFIG_DRM_AMD_DC_FP)
> -static bool is_synaptics_cascaded_panamera(struct dc_link *link, struct drm_dp_mst_port *port)
> -{
> - u8 branch_vendor_data[4] = { 0 }; // Vendor data 0x50C ~ 0x50F
> -
> - if (drm_dp_dpcd_read(port->mgr->aux, DP_BRANCH_VENDOR_SPECIFIC_START, &branch_vendor_data, 4) == 4) {
> - if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 &&
> - IS_SYNAPTICS_CASCADED_PANAMERA(link->dpcd_caps.branch_dev_name, branch_vendor_data)) {
> - DRM_INFO("Synaptics Cascaded MST hub\n");
> - return true;
> - }
> - }
> -
> - return false;
> -}
> -
> static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnector)
> {
> struct dc_sink *dc_sink = aconnector->dc_sink;
> @@ -237,32 +222,14 @@ static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnecto
> u8 dsc_branch_dec_caps_raw[3] = { 0 }; // DSC branch decoder caps 0xA0 ~ 0xA2
> u8 *dsc_branch_dec_caps = NULL;
>
> - aconnector->dsc_aux = drm_dp_mst_dsc_aux_for_port(port);
> -
> - /*
> - * drm_dp_mst_dsc_aux_for_port() will return NULL for certain configs
> - * because it only check the dsc/fec caps of the "port variable" and not the dock
> - *
> - * This case will return NULL: DSC capabe MST dock connected to a non fec/dsc capable display
> - *
> - * Workaround: explicitly check the use case above and use the mst dock's aux as dsc_aux
> - *
> - */
> - if (!aconnector->dsc_aux && !port->parent->port_parent &&
> - needs_dsc_aux_workaround(aconnector->dc_link))
> - aconnector->dsc_aux = &aconnector->mst_root->dm_dp_aux.aux;
> -
> - /* synaptics cascaded MST hub case */
> - if (is_synaptics_cascaded_panamera(aconnector->dc_link, port))
> - aconnector->dsc_aux = port->mgr->aux;
> -
> - if (!aconnector->dsc_aux)
> + drm_dp_mst_dsc_aux_for_port(port);
> + if (!aconnector->mst_output_port->dsc_aux)
> return false;
>
> - if (drm_dp_dpcd_read(aconnector->dsc_aux, DP_DSC_SUPPORT, dsc_caps, 16) < 0)
> + if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux, DP_DSC_SUPPORT, dsc_caps, 16) < 0)
> return false;
>
> - if (drm_dp_dpcd_read(aconnector->dsc_aux,
> + if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux,
> DP_DSC_BRANCH_OVERALL_THROUGHPUT_0, dsc_branch_dec_caps_raw, 3) == 3)
> dsc_branch_dec_caps = dsc_branch_dec_caps_raw;
>
> @@ -279,10 +246,10 @@ static bool retrieve_downstream_port_device(struct amdgpu_dm_connector *aconnect
> {
> union dp_downstream_port_present ds_port_present;
>
> - if (!aconnector->dsc_aux)
> + if (!aconnector->mst_output_port->dsc_aux)
> return false;
>
> - if (drm_dp_dpcd_read(aconnector->dsc_aux, DP_DOWNSTREAMPORT_PRESENT, &ds_port_present, 1) < 0) {
> + if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux, DP_DOWNSTREAMPORT_PRESENT, &ds_port_present, 1) < 0) {
> DRM_INFO("Failed to read downstream_port_present 0x05 from DFP of branch device\n");
> return false;
> }
> @@ -501,8 +468,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
> dc_sink_release(aconnector->dc_sink);
> aconnector->dc_sink = NULL;
> aconnector->edid = NULL;
> - aconnector->dsc_aux = NULL;
> - port->passthrough_aux = NULL;
> + aconnector->mst_output_port->dsc_aux = NULL;
> + aconnector->mst_output_port->dsc_passthrough_aux = NULL;
>
> amdgpu_dm_set_mst_status(&aconnector->mst_status,
> MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
> @@ -1293,7 +1260,7 @@ static bool is_dsc_need_re_compute(
> continue;
>
> aconnector = (struct amdgpu_dm_connector *) stream->dm_stream_context;
> - if (!aconnector || !aconnector->dsc_aux)
> + if (!aconnector || !aconnector->mst_output_port->dsc_aux)
> continue;
>
> stream_on_link[new_stream_on_link_num] = aconnector;
> @@ -1778,13 +1745,13 @@ enum dc_status dm_dp_mst_is_port_support_mode(
> }
>
> /*DSC necessary case*/
> - if (!aconnector->dsc_aux)
> + if (!aconnector->mst_output_port->dsc_aux)
> return DC_FAIL_BANDWIDTH_VALIDATE;
>
> if (is_dsc_common_config_possible(stream, &bw_range)) {
>
> /*capable of dsc passthough. dsc bitstream along the entire path*/
> - if (aconnector->mst_output_port->passthrough_aux) {
> + if (aconnector->mst_output_port->dsc_passthrough_aux) {
> if (bw_range.min_kbps > end_to_end_bw_in_kbps) {
> DRM_DEBUG_DRIVER("MST_DSC dsc passthrough and decode at endpoint"
> "Max dsc compression bw can't fit into end-to-end bw\n");
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index 6ee51003de3c..fedeec8f8bea 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -2259,6 +2259,7 @@ EXPORT_SYMBOL(drm_dp_stop_crc);
> struct dpcd_quirk {
> u8 oui[3];
> u8 device_id[6];
> + u8 vendor_data[4];
> bool is_branch;
> u32 quirks;
> };
> @@ -2266,26 +2267,31 @@ struct dpcd_quirk {
> #define OUI(first, second, third) { (first), (second), (third) }
> #define DEVICE_ID(first, second, third, fourth, fifth, sixth) \
> { (first), (second), (third), (fourth), (fifth), (sixth) }
> +#define VENDOR_DATA(first, second, third, fourth) \
> + { (first), (second), (third), (fourth) }
>
> #define DEVICE_ID_ANY DEVICE_ID(0, 0, 0, 0, 0, 0)
> +#define VENDOR_DATA_ANY VENDOR_DATA(0, 0, 0, 0)
>
> static const struct dpcd_quirk dpcd_quirk_list[] = {
> /* Analogix 7737 needs reduced M and N at HBR2 link rates */
> - { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
> + { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
> /* LG LP140WF6-SPM1 eDP panel */
> - { OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), false, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
> + { OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
> /* Apple panels need some additional handling to support PSR */
> - { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) },
> + { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) },
> /* CH7511 seems to leave SINK_COUNT zeroed */
> - { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
> + { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
> /* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */
> - { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
> + { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
> /* Synaptics DP1.4 MST hubs require DSC for some modes on which it applies HBLANK expansion. */
> - { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
> + { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
> /* MediaTek panels (at least in U3224KBA) require DSC for modes with a short HBLANK on UHBR links. */
> - { OUI(0x00, 0x0C, 0xE7), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
> + { OUI(0x00, 0x0C, 0xE7), DEVICE_ID_ANY, VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
> /* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */
> - { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
> + { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
> + /* Lenovo dock that needs root branch for dsc */
> + { OUI(0x90, 0xCC, 0x24), DEVICE_ID(83, 89, 78, 65, 83, 50), VENDOR_DATA(4, 6, 90, 0), true, BIT(DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION) },
> };
>
> #undef OUI
> @@ -2305,6 +2311,7 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch)
> u32 quirks = 0;
> int i;
> u8 any_device[] = DEVICE_ID_ANY;
> + u8 any_vendor[] = VENDOR_DATA_ANY;
>
> for (i = 0; i < ARRAY_SIZE(dpcd_quirk_list); i++) {
> quirk = &dpcd_quirk_list[i];
> @@ -2319,6 +2326,10 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch)
> memcmp(quirk->device_id, ident->device_id, sizeof(ident->device_id)) != 0)
> continue;
>
> + if (memcmp(quirk->vendor_data, any_vendor, sizeof(any_vendor)) != 0 &&
> + memcmp(quirk->vendor_data, ident->vendor_data, sizeof(ident->vendor_data)) != 0)
> + continue;
> +
> quirks |= quirk->quirks;
> }
>
> @@ -2344,10 +2355,11 @@ static void drm_dp_dump_desc(struct drm_dp_aux *aux,
> const struct drm_dp_dpcd_ident *ident = &desc->ident;
>
> drm_dbg_kms(aux->drm_dev,
> - "%s: %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
> + "%s: %s: OUI %*phD dev-ID %*pE vendor-DATA %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
> aux->name, device_name,
> (int)sizeof(ident->oui), ident->oui,
> (int)strnlen(ident->device_id, sizeof(ident->device_id)), ident->device_id,
> + (int)strnlen(ident->vendor_data, sizeof(ident->vendor_data)), ident->vendor_data,
> ident->hw_rev >> 4, ident->hw_rev & 0xf,
> ident->sw_major_rev, ident->sw_minor_rev,
> desc->quirks);
> diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> index a040d7dfced1..85fa9234b46d 100644
> --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> @@ -2258,6 +2258,8 @@ void drm_dp_mst_connector_early_unregister(struct drm_connector *connector,
> drm_dbg_kms(port->mgr->dev, "unregistering %s remote bus for %s\n",
> port->aux.name, connector->kdev->kobj.name);
> drm_dp_aux_unregister_devnode(&port->aux);
> + port->dsc_aux = NULL;
> + port->dsc_passthrough_aux = NULL;
> }
> EXPORT_SYMBOL(drm_dp_mst_connector_early_unregister);
>
> @@ -5445,7 +5447,8 @@ int drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state, struct drm
> if (!crtc)
> continue;
>
> - if (!drm_dp_mst_dsc_aux_for_port(pos->port))
> + drm_dp_mst_dsc_aux_for_port(pos->port);
> + if (!pos->port->dsc_aux)
> continue;
>
> crtc_state = drm_atomic_get_crtc_state(mst_state->base.state, crtc);
> @@ -5994,57 +5997,6 @@ static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port)
> i2c_del_adapter(&port->aux.ddc);
> }
>
> -/**
> - * drm_dp_mst_is_virtual_dpcd() - Is the given port a virtual DP Peer Device
> - * @port: The port to check
> - *
> - * A single physical MST hub object can be represented in the topology
> - * by multiple branches, with virtual ports between those branches.
> - *
> - * As of DP1.4, An MST hub with internal (virtual) ports must expose
> - * certain DPCD registers over those ports. See sections 2.6.1.1.1
> - * and 2.6.1.1.2 of Display Port specification v1.4 for details.
> - *
> - * May acquire mgr->lock
> - *
> - * Returns:
> - * true if the port is a virtual DP peer device, false otherwise
> - */
> -static bool drm_dp_mst_is_virtual_dpcd(struct drm_dp_mst_port *port)
> -{
> - struct drm_dp_mst_port *downstream_port;
> -
> - if (!port || port->dpcd_rev < DP_DPCD_REV_14)
> - return false;
> -
> - /* Virtual DP Sink (Internal Display Panel) */
> - if (drm_dp_mst_port_is_logical(port))
> - return true;
> -
> - /* DP-to-HDMI Protocol Converter */
> - if (port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV &&
> - !port->mcs &&
> - port->ldps)
> - return true;
> -
> - /* DP-to-DP */
> - mutex_lock(&port->mgr->lock);
> - if (port->pdt == DP_PEER_DEVICE_MST_BRANCHING &&
> - port->mstb &&
> - port->mstb->num_ports == 2) {
> - list_for_each_entry(downstream_port, &port->mstb->ports, next) {
> - if (downstream_port->pdt == DP_PEER_DEVICE_SST_SINK &&
> - !downstream_port->input) {
> - mutex_unlock(&port->mgr->lock);
> - return true;
> - }
> - }
> - }
> - mutex_unlock(&port->mgr->lock);
> -
> - return false;
> -}
> -
> /**
> * drm_dp_mst_aux_for_parent() - Get the AUX device for an MST port's parent
> * @port: MST port whose parent's AUX device is returned
> @@ -6074,114 +6026,145 @@ EXPORT_SYMBOL(drm_dp_mst_aux_for_parent);
> * This operation can be expensive (up to four aux reads), so
> * the caller should cache the return.
> *
> - * Returns:
> - * NULL if DSC cannot be enabled on this port, otherwise the aux device
> + * port->dsc_aux - point for dsc decompression
> + * port->dsc_passthrough_aux - point for dsc passthrough
> + *
> */
> -struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
> +void drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
> {
> - struct drm_dp_mst_port *immediate_upstream_port;
> - struct drm_dp_aux *immediate_upstream_aux;
> - struct drm_dp_mst_port *fec_port;
> + struct drm_dp_mst_topology_mgr *mgr = port->mgr;
> + struct drm_dp_mst_port *immediate_upstream_port = NULL;
> + struct drm_dp_mst_port *fec_port = NULL;
> + struct drm_dp_mst_port *dsc_port = NULL;
> + struct drm_dp_aux *upstream_aux;
> struct drm_dp_desc desc = {};
> - u8 endpoint_fec;
> - u8 endpoint_dsc;
> + bool end_has_dpcd = (port->dpcd_rev > 0);
> + u8 endpoint_dsc = 0;
> + u8 upstream_dsc;
> + u8 fec_cap;
>
> if (!port)
> - return NULL;
> + return;
> +
> + port->dsc_aux = NULL;
> + port->dsc_passthrough_aux = NULL;
> +
> + /* Check special case first */
> + if (drm_dp_read_desc(mgr->aux, &desc, true) == 0) {
> + if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION)) {
> + port->dsc_aux = mgr->aux;
> + drm_info(mgr->dev, "MST_DSC DSC_MUST_ROOT_DECODING w/a\n");
> + return;
> + }
> + }
> +
> + /* Policy start */
> + if (!drm_dp_mst_is_end_device(port->pdt, port->mcs)) {
> + drm_err(mgr->dev,
> + "MST_DSC Can't determine dsc aux for port %p which is not connected to end device\n",
> + port);
> + return;
> + }
>
> if (port->parent->port_parent)
> immediate_upstream_port = port->parent->port_parent;
> - else
> - immediate_upstream_port = NULL;
>
> - fec_port = immediate_upstream_port;
> - while (fec_port) {
> - /*
> - * Each physical link (i.e. not a virtual port) between the
> - * output and the primary device must support FEC
> - */
> - if (!drm_dp_mst_is_virtual_dpcd(fec_port) &&
> - !fec_port->fec_capable)
> - return NULL;
> + if (end_has_dpcd) {
> + drm_info(mgr->dev, "MST_DSC check port->aux for dsc decompression capability\n");
> + if (drm_dp_dpcd_read(&port->aux, DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1) {
> + drm_err(mgr->dev, "MST_DSC Can't retrieve dsc caps from endpoint port\n");
> + goto out_dsc_fail;
> + }
> + }
>
> - fec_port = fec_port->parent->port_parent;
> + if (immediate_upstream_port) {
> + upstream_aux = &immediate_upstream_port->aux;
> + drm_info(mgr->dev, "MST_DSC check immediate_upstream_port->aux for dsc passthrough capability\n");
> + } else {
> + upstream_aux = mgr->aux;
> + drm_info(mgr->dev, "MST_DSC check mgr->aux for dsc passthrough capability\n");
> }
>
> - /* DP-to-DP peer device */
> - if (drm_dp_mst_is_virtual_dpcd(immediate_upstream_port)) {
> - u8 upstream_dsc;
> -
> - if (drm_dp_dpcd_read(&port->aux,
> - DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
> - return NULL;
> - if (drm_dp_dpcd_read(&port->aux,
> - DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
> - return NULL;
> - if (drm_dp_dpcd_read(&immediate_upstream_port->aux,
> - DP_DSC_SUPPORT, &upstream_dsc, 1) != 1)
> - return NULL;
> -
> - /* Enpoint decompression with DP-to-DP peer device */
> - if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
> - (endpoint_fec & DP_FEC_CAPABLE) &&
> - (upstream_dsc & DP_DSC_PASSTHROUGH_IS_SUPPORTED)) {
> - port->passthrough_aux = &immediate_upstream_port->aux;
> - return &port->aux;
> - }
> + if (drm_dp_dpcd_read(upstream_aux, DP_DSC_SUPPORT, &upstream_dsc, 1) != 1) {
> + drm_err(mgr->dev, "MST_DSC Can't retrieve dsc caps from upstream port\n");
> + goto out_dsc_fail;
> + }
>
> - /* Virtual DPCD decompression with DP-to-DP peer device */
> - return &immediate_upstream_port->aux;
> + /* Consider passthrough as the first option for dsc_aux/dsc_passthrough_aux */
> + if (endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED &&
> + upstream_dsc & DP_DSC_PASSTHROUGH_IS_SUPPORTED) {
> + dsc_port = port;
> + port->dsc_aux = &port->aux;
> + port->dsc_passthrough_aux = upstream_aux;
> + drm_info(mgr->dev, "MST_DSC dsc passthrough virtual peer device and decompression at endpoint\n");
> }
>
> - /* Virtual DPCD decompression with DP-to-HDMI or Virtual DP Sink */
> - if (drm_dp_mst_is_virtual_dpcd(port))
> - return &port->aux;
> + if (!dsc_port) {
> + if (!immediate_upstream_port) {
> + /* Topology with 1 mstb only
> + * directly connected dp2.0 case which is enumerated as 1-to-1
> + * sst branch device that output pdt is stream sink
> + */
> + if (upstream_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED)
> + port->dsc_aux = mgr->aux;
>
> - /*
> - * Synaptics quirk
> - * Applies to ports for which:
> - * - Physical aux has Synaptics OUI
> - * - DPv1.4 or higher
> - * - Port is on primary branch device
> - * - Not a VGA adapter (DP_DWN_STRM_PORT_TYPE_ANALOG)
> - */
> - if (immediate_upstream_port)
> - immediate_upstream_aux = &immediate_upstream_port->aux;
> - else
> - immediate_upstream_aux = port->mgr->aux;
> + if (!port->dsc_aux) {
> + drm_err(mgr->dev, "MST_DSC dsc decompression not support at root branch\n");
> + goto out_dsc_fail;
> + }
>
> - if (drm_dp_read_desc(immediate_upstream_aux, &desc, true))
> - return NULL;
> + drm_info(mgr->dev, "MST_DSC topology with 1 mstb only, dsc decompression at root branch\n");
> + } else {
> + /* Topology with multiple mstbs */
> + dsc_port = immediate_upstream_port;
> + endpoint_dsc = upstream_dsc;
> +
> + if (endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED)
> + port->dsc_aux = &dsc_port->aux;
> + else {
> + drm_err(mgr->dev,
> + "MST_DSC dsc decompression not support at immediate_upstream_port %p\n",
> + dsc_port);
> + goto out_dsc_fail;
> + }
>
> - if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD)) {
> - u8 dpcd_ext[DP_RECEIVER_CAP_SIZE];
> + drm_info(mgr->dev, "MST_DSC topology with multiple mstbs, dsc decompression at virtual peer device\n");
> + }
> + }
>
> - if (drm_dp_read_dpcd_caps(immediate_upstream_aux, dpcd_ext) < 0)
> - return NULL;
> + /* Check the virtual channel from source till dsc port link support FEC */
> + fec_port = dsc_port;
> + while (fec_port) {
> + /*
> + * Each link between the output and the source
> + * must support FEC. Note that virtual dpcd fec is identical
> + * to the fec capability of it's MST BU's DPRx
> + */
> + if (!fec_port->fec_capable) {
> + /* enum path result of virtual peer device will return fec_capable as false */
> + if ((drm_dp_dpcd_read(&fec_port->aux, DP_FEC_CAPABILITY, &fec_cap, 1) != 1) ||
> + !(fec_cap & DP_FEC_CAPABLE)) {
> + drm_err(mgr->dev, "MST_DSC Failed to retrieve fec caps at port %p\n", fec_port);
> + goto out_dsc_fail;
> + }
> + fec_port->fec_capable = true;
> + }
>
> - if (dpcd_ext[DP_DPCD_REV] >= DP_DPCD_REV_14 &&
> - ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT) &&
> - ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK)
> - != DP_DWN_STRM_PORT_TYPE_ANALOG)))
> - return immediate_upstream_aux;
> + fec_port = fec_port->parent->port_parent;
> }
>
> - /*
> - * The check below verifies if the MST sink
> - * connected to the GPU is capable of DSC -
> - * therefore the endpoint needs to be
> - * both DSC and FEC capable.
> - */
> - if (drm_dp_dpcd_read(&port->aux,
> - DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
> - return NULL;
> - if (drm_dp_dpcd_read(&port->aux,
> - DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
> - return NULL;
> - if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
> - (endpoint_fec & DP_FEC_CAPABLE))
> - return &port->aux;
> + /* Ensure fec between source and the connected DPRx */
> + if ((drm_dp_dpcd_read(mgr->aux, DP_FEC_CAPABILITY, &fec_cap, 1) != 1) ||
> + !(fec_cap & DP_FEC_CAPABLE)) {
> + drm_err(mgr->dev, "MST_DSC fec not supported between source and the connected DPRx\n");
> + goto out_dsc_fail;
> + }
>
> - return NULL;
> + return;
> +
> +out_dsc_fail:
> + port->dsc_aux = NULL;
> + port->dsc_passthrough_aux = NULL;
> + return;
> }
> EXPORT_SYMBOL(drm_dp_mst_dsc_aux_for_port);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a1fcedfd404b..d39a7c6f5bfa 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3219,7 +3219,7 @@ intel_dp_sink_set_dsc_passthrough(const struct intel_connector *connector,
> {
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> struct drm_dp_aux *aux = connector->port ?
> - connector->port->passthrough_aux : NULL;
> + connector->port->dsc_passthrough_aux : NULL;
>
> if (!aux)
> return;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 15541932b809..73cb1c673525 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -1699,7 +1699,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
>
> intel_dp_init_modeset_retry_work(intel_connector);
>
> - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port);
> + drm_dp_mst_dsc_aux_for_port(port);
> + intel_connector->dp.dsc_decompression_aux = port->dsc_aux;
> intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
> intel_connector->dp.dsc_hblank_expansion_quirk =
> detect_dsc_hblank_expansion_quirk(intel_connector);
> diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h
> index a6f8b098c56f..fa454506866b 100644
> --- a/include/drm/display/drm_dp.h
> +++ b/include/drm/display/drm_dp.h
> @@ -980,6 +980,7 @@
> #define DP_BRANCH_REVISION_START 0x509
> #define DP_BRANCH_HW_REV 0x509
> #define DP_BRANCH_SW_REV 0x50A
> +#define DP_BRANCH_VENDOR_SPECIFIC_START 0x50C
>
> /* Link/Sink Device Power Control */
> #define DP_SET_POWER 0x600
> diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
> index 279624833ea9..5eb583004d00 100644
> --- a/include/drm/display/drm_dp_helper.h
> +++ b/include/drm/display/drm_dp_helper.h
> @@ -643,6 +643,7 @@ struct drm_dp_dpcd_ident {
> u8 hw_rev;
> u8 sw_major_rev;
> u8 sw_minor_rev;
> + u8 vendor_data[4];
> } __packed;
>
> /**
> @@ -711,6 +712,13 @@ enum drm_dp_quirk {
> * requires enabling DSC.
> */
> DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC,
> + /**
> + * @DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION:
> + *
> + * The device has internal virutual dpcd with dsc decoding cap,
> + * but dsc decoding must be done at root mstb.
> + */
> + DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION,
> };
>
> /**
> diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h
> index f6a1cbb0f600..b04ca4a97af2 100644
> --- a/include/drm/display/drm_dp_mst_helper.h
> +++ b/include/drm/display/drm_dp_mst_helper.h
> @@ -135,7 +135,8 @@ struct drm_dp_mst_port {
> */
> struct drm_dp_mst_branch *mstb;
> struct drm_dp_aux aux; /* i2c bus for this port? */
> - struct drm_dp_aux *passthrough_aux;
> + struct drm_dp_aux *dsc_aux;
> + struct drm_dp_aux *dsc_passthrough_aux;
> struct drm_dp_mst_branch *parent;
>
> struct drm_connector *connector;
> @@ -956,7 +957,7 @@ bool drm_dp_mst_port_is_logical(struct drm_dp_mst_port *port)
> }
>
> struct drm_dp_aux *drm_dp_mst_aux_for_parent(struct drm_dp_mst_port *port);
> -struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port);
> +void drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port);
>
> static inline struct drm_dp_mst_topology_state *
> to_drm_dp_mst_topology_state(struct drm_private_state *state)
--
Jani Nikula, Intel
More information about the dri-devel
mailing list