[PATCH v1 1/2] drm/bridge: it6505: HDCP CTS fail on repeater items
Pin-yen Lin
treapking at chromium.org
Fri Sep 20 07:12:58 UTC 2024
Hi Hermes,
On Thu, Sep 19, 2024 at 5:20 PM Hermes Wu <Hermes.Wu at ite.com.tw> wrote:
>
> From: allen chen <allen.chen at ite.corp-partner.google.com>
>
> Fix HDCP CTS items on UNIGRAF DPR-100.
>
> Change-Id: I03f0758779f73164c8ae2fdf61e41dc693e27605
>
> Change-Id: Ib7a8fabaeccd56d3bd7c8adc7384a363b0f7b88d
Remove the Change-Id's as mentioned in the other patch.
> Signed-off-by: Hermes Wu <Hermes.Wu at ite.com.tw>
You'll want to add a Co-developed-by tag if you make modifications on
this patch.
> ---
> drivers/gpu/drm/bridge/ite-it6505.c | 152 ++++++++++++++++++----------
> 1 file changed, 101 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 7a4608844de3..cef02c8c363e 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -298,11 +298,11 @@
> #define MAX_LANE_COUNT 4
> #define MAX_LINK_RATE HBR
> #define AUTO_TRAIN_RETRY 3
> -#define MAX_HDCP_DOWN_STREAM_COUNT 10
> +#define MAX_HDCP_DOWN_STREAM_COUNT 127
> #define MAX_CR_LEVEL 0x03
> #define MAX_EQ_LEVEL 0x03
> #define AUX_WAIT_TIMEOUT_MS 15
> -#define AUX_FIFO_MAX_SIZE 32
> +#define AUX_FIFO_MAX_SIZE 16
> #define PIXEL_CLK_DELAY 1
> #define PIXEL_CLK_INVERSE 0
> #define ADJUST_PHASE_THRESHOLD 80000
> @@ -326,6 +326,9 @@ enum aux_cmd_type {
> CMD_AUX_NATIVE_READ = 0x0,
> CMD_AUX_NATIVE_WRITE = 0x5,
> CMD_AUX_I2C_EDID_READ = 0xB,
> +
> + /*extend read ncommand */
> + CMD_AUX_GET_KSV_LIST = 0x10,
> };
>
> enum aux_cmd_reply {
> @@ -973,7 +976,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
>
> aux_op_start:
> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> /* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
> size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
> /* Enable AUX FIFO read back and clear FIFO */
> @@ -1004,7 +1007,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> size);
>
> /* Aux Fire */
> - it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
> + it6505_write(it6505, REG_AUX_CMD_REQ, (cmd & 0x0F));
>
> ret = it6505_aux_wait(it6505);
> if (ret < 0)
> @@ -1038,7 +1041,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> goto aux_op_start;
> }
>
> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> for (i = 0; i < size; i++) {
> ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
> if (ret < 0)
> @@ -1063,7 +1066,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
> ret = i;
>
> aux_op_err:
> - if (cmd == CMD_AUX_I2C_EDID_READ) {
> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
> /* clear AUX FIFO */
> it6505_set_bits(it6505, REG_AUX_CTRL,
> AUX_EN_FIFO_READ | CLR_EDID_FIFO,
> @@ -1084,18 +1087,25 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
> size_t size, enum aux_cmd_reply *reply)
> {
> int i, ret_size, ret = 0, request_size;
> + struct device *dev = &it6505->client->dev;
This is unused and removed in the following patch. Please remove this.
>
> mutex_lock(&it6505->aux_lock);
> - for (i = 0; i < size; i += 4) {
> - request_size = min((int)size - i, 4);
> + for (i = 0; i < size; ) {
> + if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST)
> + request_size = min((int)size - i, AUX_FIFO_MAX_SIZE);
> + else
> + request_size = min((int)size - i, 4);
> +
> ret_size = it6505_aux_operation(it6505, cmd, address + i,
> buffer + i, request_size,
> reply);
> +
Remove the blank line here.
> if (ret_size < 0) {
> ret = ret_size;
> goto aux_op_err;
> }
>
> + i += request_size;
> ret += ret_size;
> }
>
> @@ -1186,6 +1196,35 @@ static int it6505_get_edid_block(void *data, u8 *buf, unsigned int block,
> return 0;
> }
>
> +static int it6505_get_ksvlist(struct it6505 *it6505, u8 *buf, size_t len)
> +{
> + int i, request_size, ret;
> + struct device *dev = &it6505->client->dev;
> + enum aux_cmd_reply reply;
> +
> + for (i = 0; i < len; ) {
> + request_size = min((int)len - i, 15);
> +
> + ret = it6505_aux_do_transfer(it6505, CMD_AUX_GET_KSV_LIST,
> + DP_AUX_HDCP_KSV_FIFO,
> + buf + i, request_size, &reply);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "request_size = %d, ret =%d", request_size, ret);
> + if (ret < 0)
> + return ret;
> +
> + i += request_size;
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "ksv read cnt = %d down_stream_cnt=%d ", i, i/5);
> +
> + for (i = 0 ; i < len; i += 5)
> + DRM_DEV_DEBUG_DRIVER(dev, "ksv[%d] = %02X%02X%02X%02X%02X",
> + i/5, buf[i], buf[i + 1], buf[i + 2], buf[i + 3], buf[i + 4]);
> +
> + return len;
> +}
> +
> static void it6505_variable_config(struct it6505 *it6505)
> {
> it6505->link_rate_bw_code = HBR;
> @@ -1927,6 +1966,7 @@ static void it6505_hdcp_part1_auth(struct it6505 *it6505)
> it6505_set_bits(it6505, REG_HDCP_TRIGGER, HDCP_TRIGGER_START,
> HDCP_TRIGGER_START);
>
> + it6505->is_repeater = (hdcp_bcaps & DP_BCAPS_REPEATER_PRESENT);
> it6505->hdcp_status = HDCP_AUTH_GOING;
> }
>
> @@ -1963,7 +2003,7 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
> {
> struct device *dev = &it6505->client->dev;
> u8 binfo[2];
> - int down_stream_count, i, err, msg_count = 0;
> + int down_stream_count, err, msg_count = 0;
>
> err = it6505_get_dpcd(it6505, DP_AUX_HDCP_BINFO, binfo,
> ARRAY_SIZE(binfo));
> @@ -1989,17 +2029,12 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
> return 0;
> }
>
> - for (i = 0; i < down_stream_count; i++) {
> - err = it6505_get_dpcd(it6505, DP_AUX_HDCP_KSV_FIFO +
> - (i % 3) * DRM_HDCP_KSV_LEN,
> - sha1_input + msg_count,
> - DRM_HDCP_KSV_LEN);
>
> - if (err < 0)
> - return err;
> + err = it6505_get_ksvlist(it6505, sha1_input, down_stream_count * 5);
> + if (err < 0)
> + return err;
>
> - msg_count += 5;
> - }
> + msg_count += down_stream_count * 5;
>
> it6505->hdcp_down_stream_count = down_stream_count;
> sha1_input[msg_count++] = binfo[0];
> @@ -2027,7 +2062,7 @@ static bool it6505_hdcp_part2_ksvlist_check(struct it6505 *it6505)
> {
> struct device *dev = &it6505->client->dev;
> u8 av[5][4], bv[5][4];
> - int i, err;
> + int i, err, retry;
>
> i = it6505_setup_sha1_input(it6505, it6505->sha1_input);
> if (i <= 0) {
> @@ -2037,21 +2072,28 @@ static bool it6505_hdcp_part2_ksvlist_check(struct it6505 *it6505)
>
> it6505_sha1_digest(it6505, it6505->sha1_input, i, (u8 *)av);
>
> - err = it6505_get_dpcd(it6505, DP_AUX_HDCP_V_PRIME(0), (u8 *)bv,
> - sizeof(bv));
> + for (retry = 0; retry < 3; retry++) {
>
Remove this blank line.
> - if (err < 0) {
> - dev_err(dev, "Read V' value Fail");
> - return false;
> - }
> + err = it6505_get_dpcd(it6505, DP_AUX_HDCP_V_PRIME(0), (u8 *)bv,
> + sizeof(bv));
>
And also this blank line.
> - for (i = 0; i < 5; i++)
> - if (bv[i][3] != av[i][0] || bv[i][2] != av[i][1] ||
> - bv[i][1] != av[i][2] || bv[i][0] != av[i][3])
> - return false;
> + if (err < 0) {
> + dev_err(dev, "Read V' value Fail %d", retry);
> + continue;
> + }
>
> - DRM_DEV_DEBUG_DRIVER(dev, "V' all match!!");
> - return true;
> + for (i = 0; i < 5; i++) {
> + if (bv[i][3] != av[i][0] || bv[i][2] != av[i][1] ||
> + bv[i][1] != av[i][2] || bv[i][0] != av[i][3])
> + break;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "V' all match!! %d, %d", retry, i);
> + return true;
> + }
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "V' NOT match!! %d", retry);
> + return false;
> }
>
> static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
> @@ -2059,7 +2101,7 @@ static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
> struct it6505 *it6505 = container_of(work, struct it6505,
> hdcp_wait_ksv_list);
> struct device *dev = &it6505->client->dev;
> - unsigned int timeout = 5000;
> + unsigned int timeout = 2000;
> u8 bstatus = 0;
> bool ksv_list_check;
>
> @@ -2079,21 +2121,18 @@ static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
>
> if (timeout == 0) {
> DRM_DEV_DEBUG_DRIVER(dev, "timeout and ksv list wait failed");
> - goto timeout;
> + goto hdcp_ksvlist_fail;
> }
>
> ksv_list_check = it6505_hdcp_part2_ksvlist_check(it6505);
> DRM_DEV_DEBUG_DRIVER(dev, "ksv list ready, ksv list check %s",
> - ksv_list_check ? "pass" : "fail");
> - if (ksv_list_check) {
> - it6505_set_bits(it6505, REG_HDCP_TRIGGER,
> - HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
> + ksv_list_check ? "pass" : "fail");
> +
> + if (ksv_list_check)
> return;
> - }
> -timeout:
> - it6505_set_bits(it6505, REG_HDCP_TRIGGER,
> - HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL,
> - HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL);
> +
> +hdcp_ksvlist_fail:
> + it6505_start_hdcp(it6505);
> }
>
> static void it6505_hdcp_work(struct work_struct *work)
> @@ -2139,7 +2178,7 @@ static void it6505_hdcp_work(struct work_struct *work)
> it6505_hdcp_part1_auth(it6505);
> }
>
> -static void it6505_show_hdcp_info(struct it6505 *it6505)
> +static void it6505_show_hdcp_info(struct it6505 *it6505, bool repeater_info)
> {
> struct device *dev = &it6505->client->dev;
> int i;
> @@ -2150,7 +2189,7 @@ static void it6505_show_hdcp_info(struct it6505 *it6505)
> DRM_DEV_DEBUG_DRIVER(dev, "bksv = 0x%*ph",
> (int)ARRAY_SIZE(it6505->bksvs), it6505->bksvs);
>
> - if (it6505->is_repeater) {
> + if ((repeater_info) && (it6505->is_repeater)) {
I don't think we need the extra brackets for repeater_info and
it6505->is_repeater here.
> DRM_DEV_DEBUG_DRIVER(dev, "hdcp_down_stream_count: %d",
> it6505->hdcp_down_stream_count);
> DRM_DEV_DEBUG_DRIVER(dev, "sha1_input: 0x%*ph",
> @@ -2251,12 +2290,11 @@ static void it6505_link_training_work(struct work_struct *work)
> if (ret) {
> it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> it6505_link_train_ok(it6505);
> - return;
> } else {
> it6505->auto_train_retry--;
> + it6505_dump(it6505);
> }
>
> - it6505_dump(it6505);
This modification is already done in commit 484436ec5c2b ("drm/bridge:
it6505: fix hibernate to resume no display issue"). Please rebase your
patch.
> }
>
> static void it6505_plugged_status_to_codec(struct it6505 *it6505)
> @@ -2311,14 +2349,22 @@ static int it6505_process_hpd_irq(struct it6505 *it6505)
> DRM_DEV_DEBUG_DRIVER(dev, "dp_irq_vector = 0x%02x", dp_irq_vector);
>
> if (dp_irq_vector & DP_CP_IRQ) {
> - it6505_set_bits(it6505, REG_HDCP_TRIGGER, HDCP_TRIGGER_CPIRQ,
> - HDCP_TRIGGER_CPIRQ);
>
Remove this blank line as well.
> bstatus = it6505_dpcd_read(it6505, DP_AUX_HDCP_BSTATUS);
> if (bstatus < 0)
> return bstatus;
>
> DRM_DEV_DEBUG_DRIVER(dev, "Bstatus = 0x%02x", bstatus);
> +
> + /*1B-02 ignore when bstatus is 0 */
> + if ((bstatus & DP_BSTATUS_R0_PRIME_READY) &&
> + (it6505->hdcp_status == HDCP_AUTH_GOING))
> + it6505_set_bits(it6505, REG_HDCP_TRIGGER, HDCP_TRIGGER_CPIRQ,
> + HDCP_TRIGGER_CPIRQ);
> + else if ((bstatus & (DP_BSTATUS_REAUTH_REQ | DP_BSTATUS_LINK_FAILURE)) &&
> + (it6505->hdcp_status == HDCP_AUTH_DONE))
> + it6505_start_hdcp(it6505);
> +
> }
>
> ret = drm_dp_dpcd_read_link_status(&it6505->aux, link_status);
> @@ -2431,7 +2477,7 @@ static void it6505_irq_hdcp_done(struct it6505 *it6505)
>
> DRM_DEV_DEBUG_DRIVER(dev, "hdcp done interrupt");
> it6505->hdcp_status = HDCP_AUTH_DONE;
> - it6505_show_hdcp_info(it6505);
> + it6505_show_hdcp_info(it6505, false);
> }
>
> static void it6505_irq_hdcp_fail(struct it6505 *it6505)
> @@ -2440,7 +2486,7 @@ static void it6505_irq_hdcp_fail(struct it6505 *it6505)
>
> DRM_DEV_DEBUG_DRIVER(dev, "hdcp fail interrupt");
> it6505->hdcp_status = HDCP_AUTH_IDLE;
> - it6505_show_hdcp_info(it6505);
> + it6505_show_hdcp_info(it6505, true);
> it6505_start_hdcp(it6505);
> }
>
> @@ -2455,7 +2501,11 @@ static void it6505_irq_hdcp_ksv_check(struct it6505 *it6505)
> {
> struct device *dev = &it6505->client->dev;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "HDCP event Interrupt");
> + DRM_DEV_DEBUG_DRIVER(dev, "HDCP repeater R0 event Interrupt");
> +
> + it6505_set_bits(it6505, REG_HDCP_TRIGGER,
> + HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
> +
> schedule_work(&it6505->hdcp_wait_ksv_list);
> }
>
> --
> 2.34.1
>
Regards,
Pin-yen
More information about the dri-devel
mailing list