[PATCH v1 2/2] drm/bridge: it6505: Add MSSC suport
Hermes Wu
Hermes.Wu at ite.com.tw
Fri Sep 20 08:24:47 UTC 2024
From: "Hermes.Wu" <Hermes.wu at ite.com.tw>
add AUX-I2C functionality to support MCCS.
Change-Id: I63e1a0e5da67526f89f35605a82944be67dee8ac
Signed-off-by: Hermes Wu <Hermes.wu at ite.com.tw>
---
drivers/gpu/drm/bridge/ite-it6505.c | 209 ++++++++++++++++++++++++++--
1 file changed, 200 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index cef02c8c363e..1a272c67e82b 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -127,6 +127,9 @@
#define REG_AUX_ADR_16_19 0x26
#define REG_AUX_OUT_DATA0 0x27
+#define REG_AUX_I2C_ADR 0x25
+#define REG_AUX_I2C_OP 0x26
+
#define REG_AUX_CMD_REQ 0x2B
#define AUX_BUSY BIT(5)
@@ -268,6 +271,19 @@
#define REG_SSC_CTRL1 0x189
#define REG_SSC_CTRL2 0x18A
+#define REG_AUX_USER_CTRL 0x190
+#define EN_USER_AUX BIT(0)
+#define USER_AUX_DONE BIT(1)
+#define AUX_EVENT BIT(4)
+
+#define REG_AUX_USER_DATA_REC 0x191
+#define M_AUX_IN_REC 0xF0
+#define M_AUX_OUT_REC 0x0F
+
+#define REG_AUX_USER_TXB 0x190
+#define REG_AUX_USER_REPLY 0x19A
+#define REG_AUX_USER_RXB(n) (n + 0x19B)
+
#define RBR DP_LINK_BW_1_62
#define HBR DP_LINK_BW_2_7
#define HBR2 DP_LINK_BW_5_4
@@ -303,6 +319,8 @@
#define MAX_EQ_LEVEL 0x03
#define AUX_WAIT_TIMEOUT_MS 15
#define AUX_FIFO_MAX_SIZE 16
+#define AUX_I2C_MAX_SIZE 4
+#define AUX_I2C_DEFER_RETRY 4
#define PIXEL_CLK_DELAY 1
#define PIXEL_CLK_INVERSE 0
#define ADJUST_PHASE_THRESHOLD 80000
@@ -325,7 +343,12 @@
enum aux_cmd_type {
CMD_AUX_NATIVE_READ = 0x0,
CMD_AUX_NATIVE_WRITE = 0x5,
+ CMD_AUX_GI2C_ADR = 0x08,
+ CMD_AUX_GI2C_READ = 0x09,
+ CMD_AUX_GI2C_WRITE = 0x0A,
CMD_AUX_I2C_EDID_READ = 0xB,
+ CMD_AUX_I2C_READ = 0x0D,
+ CMD_AUX_I2C_WRITE = 0x0C,
/*extend read ncommand */
CMD_AUX_GET_KSV_LIST = 0x10,
@@ -333,8 +356,11 @@ enum aux_cmd_type {
enum aux_cmd_reply {
REPLY_ACK,
- REPLY_NACK,
- REPLY_DEFER,
+ REPLY_NACK = 1,
+ REPLY_DEFER = 2,
+
+ REPLY_I2C_NACK = 4,
+ REPLY_I2C_DEFER = 8,
};
enum link_train_status {
@@ -1087,7 +1113,6 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
size_t size, enum aux_cmd_reply *reply)
{
int i, ret_size, ret = 0, request_size;
- struct device *dev = &it6505->client->dev;
mutex_lock(&it6505->aux_lock);
for (i = 0; i < size; ) {
@@ -1114,6 +1139,168 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
return ret;
}
+
+static int it6505_aux_i2c_wait(struct it6505 *it6505, u8 *reply)
+{
+ int err = 0;
+ unsigned long timeout;
+ struct device *dev = &it6505->client->dev;
+
+ timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
+
+ do {
+ if (it6505_read(it6505, REG_AUX_USER_CTRL) & AUX_EVENT)
+ break;
+ if (time_after(jiffies, timeout)) {
+ dev_err(dev, "Timed out waiting AUX I2C, BUSY = %X\n",
+ it6505_aux_op_finished(it6505));
+ err = -ETIMEDOUT;
+ goto end_aux_i2c_wait;
+ }
+ usleep_range(300, 800);
+
+ } while (!it6505_aux_op_finished(it6505));
+
+ if (reply == NULL)
+ goto end_aux_i2c_wait;
+
+ *reply = it6505_read(it6505, REG_AUX_USER_REPLY) >> 4;
+
+ if (*reply == 0)
+ goto end_aux_i2c_wait;
+
+ if ((*reply == DP_AUX_NATIVE_REPLY_DEFER) ||
+ (*reply == DP_AUX_I2C_REPLY_DEFER))
+ err = -EBUSY;
+ else if ((*reply == DP_AUX_NATIVE_REPLY_NACK) ||
+ (*reply == DP_AUX_I2C_REPLY_NACK))
+ err = -ENXIO;
+
+end_aux_i2c_wait:
+ it6505_set_bits(it6505, REG_AUX_USER_CTRL, USER_AUX_DONE, USER_AUX_DONE);
+ return err;
+}
+
+static int it6505_aux_i2c_readb(struct it6505 *it6505, u8 *buf, size_t size, u8 *reply)
+{
+ int ret, i;
+ int retry = 0;
+
+ for (retry = 0; retry < AUX_I2C_DEFER_RETRY; retry++) {
+
+ it6505_write(it6505, REG_AUX_CMD_REQ, CMD_AUX_GI2C_READ);
+
+ ret = it6505_aux_i2c_wait(it6505, reply);
+
+ if ((*reply == DP_AUX_NATIVE_REPLY_DEFER) ||
+ (*reply == DP_AUX_I2C_REPLY_DEFER))
+ continue;
+
+ if (ret >= 0)
+ break;
+ }
+
+ for (i = 0; i < size; i++)
+ buf[i] = (u8) it6505_read(it6505, REG_AUX_USER_RXB(0 + i));
+
+ return size;
+}
+
+static int it6505_aux_i2c_writeb(struct it6505 *it6505, u8 *buf, size_t size, u8 *reply)
+{
+ int i, ret;
+ int retry = 0;
+
+ for (i = 0; i < size; i++)
+ it6505_write(it6505, REG_AUX_OUT_DATA0 + i, buf[i]);
+
+ for (retry = 0; retry < AUX_I2C_DEFER_RETRY; retry++) {
+
+ it6505_write(it6505, REG_AUX_CMD_REQ, CMD_AUX_GI2C_WRITE);
+
+ ret = it6505_aux_i2c_wait(it6505, reply);
+
+ if ((*reply == DP_AUX_NATIVE_REPLY_DEFER) ||
+ (*reply == DP_AUX_I2C_REPLY_DEFER))
+ continue;
+
+ if (ret >= 0)
+ break;
+ }
+ return size;
+}
+
+static ssize_t it6505_aux_i2c_operation(struct it6505 *it6505,
+ struct drm_dp_aux_msg *msg)
+{
+ int ret;
+ ssize_t request_size, data_cnt = 0;
+ struct device *dev = &it6505->client->dev;
+ u8 *buffer = msg->buffer;
+
+ /* set AUX user mode */
+ it6505_set_bits(it6505, REG_AUX_CTRL,
+ AUX_USER_MODE | AUX_NO_SEGMENT_WR, AUX_USER_MODE);
+ it6505_set_bits(it6505, REG_AUX_USER_CTRL, EN_USER_AUX, EN_USER_AUX);
+ /* clear AUX FIFO */
+ it6505_set_bits(it6505, REG_AUX_CTRL,
+ AUX_EN_FIFO_READ | CLR_EDID_FIFO,
+ AUX_EN_FIFO_READ | CLR_EDID_FIFO);
+
+ it6505_set_bits(it6505, REG_AUX_CTRL,
+ AUX_EN_FIFO_READ | CLR_EDID_FIFO, 0x00);
+
+ it6505_write(it6505, REG_AUX_ADR_0_7, 0x00);
+ it6505_write(it6505, REG_AUX_I2C_ADR, msg->address << 1);
+
+ if (msg->size == 0) {
+ /* IIC Start/STOP dummy write */
+ it6505_write(it6505, REG_AUX_I2C_OP, msg->request);
+ it6505_write(it6505, REG_AUX_CMD_REQ, CMD_AUX_GI2C_ADR);
+ ret = it6505_aux_i2c_wait(it6505, &msg->reply);
+ goto end_aux_i2c_transfer;
+ }
+
+ /* IIC data transfer */
+ for (data_cnt = 0; data_cnt < msg->size; ) {
+ request_size = min(msg->size - data_cnt, AUX_I2C_MAX_SIZE);
+ it6505_write(it6505, REG_AUX_I2C_OP,
+ (msg->request) | ((request_size - 1) << 4));
+
+ if ((msg->request & DP_AUX_I2C_READ) == DP_AUX_I2C_READ)
+ ret = it6505_aux_i2c_readb(it6505, &buffer[data_cnt],
+ request_size, &msg->reply);
+ else
+ ret = it6505_aux_i2c_writeb(it6505, &buffer[data_cnt],
+ request_size, &msg->reply);
+
+ if (ret < 0)
+ goto end_aux_i2c_transfer;
+
+ data_cnt += request_size;
+ }
+ ret = data_cnt;
+end_aux_i2c_transfer:
+
+ it6505_set_bits(it6505, REG_AUX_USER_CTRL, EN_USER_AUX, 0);
+ it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, 0);
+ return ret;
+}
+
+
+static ssize_t it6505_aux_i2c_transfer(struct drm_dp_aux *aux,
+ struct drm_dp_aux_msg *msg)
+{
+ struct it6505 *it6505 = container_of(aux, struct it6505, aux);
+ int ret;
+
+ mutex_lock(&it6505->aux_lock);
+ ret = it6505_aux_i2c_operation(it6505, msg);
+ mutex_unlock(&it6505->aux_lock);
+ return ret;
+}
+
+
static ssize_t it6505_aux_transfer(struct drm_dp_aux *aux,
struct drm_dp_aux_msg *msg)
{
@@ -1125,7 +1312,7 @@ static ssize_t it6505_aux_transfer(struct drm_dp_aux *aux,
/* IT6505 doesn't support arbitrary I2C read / write. */
if (is_i2c)
- return -EINVAL;
+ return it6505_aux_i2c_transfer(aux, msg);
switch (msg->request) {
case DP_AUX_NATIVE_READ:
@@ -1153,6 +1340,8 @@ static ssize_t it6505_aux_transfer(struct drm_dp_aux *aux,
case REPLY_DEFER:
msg->reply = DP_AUX_NATIVE_REPLY_DEFER;
break;
+ default:
+ break;
}
return ret;
@@ -1180,7 +1369,7 @@ static int it6505_get_edid_block(void *data, u8 *buf, unsigned int block,
switch (reply) {
case REPLY_ACK:
DRM_DEV_DEBUG_DRIVER(dev, "[0x%02x]: %8ph", offset,
- buf + offset);
+ uf + offset);
offset += 8;
aux_retry = 100;
break;
@@ -1190,6 +1379,8 @@ static int it6505_get_edid_block(void *data, u8 *buf, unsigned int block,
msleep(20);
if (!(--aux_retry))
return -EIO;
+ default:
+ break;
}
}
@@ -2031,8 +2222,8 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
err = it6505_get_ksvlist(it6505, sha1_input, down_stream_count * 5);
- if (err < 0)
- return err;
+ if (err < 0)
+ return err;
msg_count += down_stream_count * 5;
@@ -2075,7 +2266,7 @@ static bool it6505_hdcp_part2_ksvlist_check(struct it6505 *it6505)
for (retry = 0; retry < 3; retry++) {
err = it6505_get_dpcd(it6505, DP_AUX_HDCP_V_PRIME(0), (u8 *)bv,
- sizeof(bv));
+ sizeof(bv));
if (err < 0) {
dev_err(dev, "Read V' value Fail %d", retry);
@@ -2126,7 +2317,7 @@ static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
ksv_list_check = it6505_hdcp_part2_ksvlist_check(it6505);
DRM_DEV_DEBUG_DRIVER(dev, "ksv list ready, ksv list check %s",
- ksv_list_check ? "pass" : "fail");
+ ksv_list_check ? "pass" : "fail");
if (ksv_list_check)
return;
--
2.34.1
More information about the dri-devel
mailing list