[PATCH] dt-bindings: lcdif: Add support for specifying display with timings

[Marek Vasut]

On 9/23/24 3:57 PM, Lukasz Majewski wrote:
> Up till now the fsl,lcdif.yaml was requiring the "port" property as a
> must have to specify the display interface on iMX devices.
> 
> However, it shall also be possible to specify the display only with
> passing its timing parameters (h* and v* ones) via "display" property:
> (as in
> Documentation/devicetree/bindings/display/panel/display-timings.yaml).

Timings should go into panel node, not into scanout engine node.

See e.g. panel-timings in arch/arm64/boot/dts/freescale/imx8mm-phg.dts , 
in your case the compatible might be "panel-dpi" .