[PATCH v4 03/11] drm/bridge: it6505: add aux operation for HDCP ksv list read

Hermes Wu Hermes.Wu at ite.com.tw
Thu Sep 26 07:47:53 UTC 2024


From: Hermes Wu <Hermes.wu at ite.com.tw>

Add aux operaction command which supports read DPCD KSV FIFO
with aux fifo.


Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Hermes Wu <Hermes.wu at ite.com.tw>
---
 drivers/gpu/drm/bridge/ite-it6505.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index b451d3c2ac1d..0583abdca75f 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -324,6 +324,9 @@ enum aux_cmd_type {
 	CMD_AUX_NATIVE_READ = 0x0,
 	CMD_AUX_NATIVE_WRITE = 0x5,
 	CMD_AUX_I2C_EDID_READ = 0xB,
+
+	/* KSV list read using AUX native read with FIFO */
+	CMD_AUX_GET_KSV_LIST = 0x10,
 };
 
 enum aux_cmd_reply {
@@ -965,7 +968,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
 
 aux_op_start:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	/* HW AUX FIFO supports only EDID and DCPD KSV FIFO aread */
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
 		size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
 		/* Enable AUX FIFO read back and clear FIFO */
@@ -1030,7 +1034,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 		goto aux_op_start;
 	}
 
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		for (i = 0; i < size; i++) {
 			ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
 			if (ret < 0)
@@ -1055,7 +1059,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	ret = i;
 
 aux_op_err:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* clear AUX FIFO */
 		it6505_set_bits(it6505, REG_AUX_CTRL,
 				AUX_EN_FIFO_READ | CLR_EDID_FIFO,
@@ -1079,7 +1083,7 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
 
 	mutex_lock(&it6505->aux_lock);
 	for (i = 0; i < size; ) {
-		if (cmd == CMD_AUX_I2C_EDID_READ)
+		if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST)
 			request_size = min_t(int, (int)size - i, AUX_FIFO_MAX_SIZE);
 		else
 			request_size = min_t(int, (int)size - i, 4);
-- 
2.34.1



More information about the dri-devel mailing list