[PATCH v4 08/11] drm/bridge: it6505: fix HDCP KSV list did not read correctly.
Hermes Wu
Hermes.Wu at ite.com.tw
Thu Sep 26 07:50:17 UTC 2024
From: Hermes Wu <Hermes.wu at ite.com.tw>
When running the HDCP CTS test on UNIGRAF DPR-100.
KSV list must be read from DPCD with 5 byte boundary.
The original aux operation using AUX_NATIVE_READ can not read back the
KSV list correctly.
Change to CMD_AUX_GET_KSV_LIST operaction.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Hermes Wu <Hermes.wu at ite.com.tw>
---
drivers/gpu/drm/bridge/ite-it6505.c | 46 +++++++++++++++++++++--------
1 file changed, 34 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 82986f28f653..143d58ed1b0e 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -1188,6 +1188,35 @@ static int it6505_get_edid_block(void *data, u8 *buf, unsigned int block,
return 0;
}
+static int it6505_get_ksvlist(struct it6505 *it6505, u8 *buf, size_t len)
+{
+ int i, request_size, ret;
+ struct device *dev = it6505->dev;
+ enum aux_cmd_reply reply;
+
+ for (i = 0; i < len; ) {
+ request_size = min_t(int, (int)len - i, 15);
+
+ ret = it6505_aux_do_transfer(it6505, CMD_AUX_GET_KSV_LIST,
+ DP_AUX_HDCP_KSV_FIFO,
+ buf + i, request_size, &reply);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "request_size = %d, ret =%d", request_size, ret);
+ if (ret < 0)
+ return ret;
+
+ i += request_size;
+ }
+
+ DRM_DEV_DEBUG_DRIVER(dev, "ksv read cnt = %d down_stream_cnt=%d ", i, i / 5);
+
+ for (i = 0 ; i < len; i += 5)
+ DRM_DEV_DEBUG_DRIVER(dev, "ksv[%d] = %02X%02X%02X%02X%02X",
+ i / 5, buf[i], buf[i + 1], buf[i + 2], buf[i + 3], buf[i + 4]);
+
+ return len;
+}
+
static void it6505_variable_config(struct it6505 *it6505)
{
it6505->link_rate_bw_code = HBR;
@@ -1969,7 +1998,7 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
{
struct device *dev = it6505->dev;
u8 binfo[2];
- int down_stream_count, i, err, msg_count = 0;
+ int down_stream_count, err, msg_count = 0;
err = it6505_get_dpcd(it6505, DP_AUX_HDCP_BINFO, binfo,
ARRAY_SIZE(binfo));
@@ -1994,18 +2023,11 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
down_stream_count);
return 0;
}
+ err = it6505_get_ksvlist(it6505, sha1_input, down_stream_count * 5);
+ if (err < 0)
+ return err;
- for (i = 0; i < down_stream_count; i++) {
- err = it6505_get_dpcd(it6505, DP_AUX_HDCP_KSV_FIFO +
- (i % 3) * DRM_HDCP_KSV_LEN,
- sha1_input + msg_count,
- DRM_HDCP_KSV_LEN);
-
- if (err < 0)
- return err;
-
- msg_count += 5;
- }
+ msg_count += down_stream_count * 5;
it6505->hdcp_down_stream_count = down_stream_count;
sha1_input[msg_count++] = binfo[0];
--
2.34.1
More information about the dri-devel
mailing list