[PATCH 4/8] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate

[Maxime Ripard]

On Mon, Sep 30, 2024 at 01:28:59PM GMT, Liu Ying wrote:
> Multiple display modes could be read from a display device's EDID.
> Use clk_round_rate() to validate the "ldb" clock rate for each mode
> in drm_bridge_funcs::mode_valid() to filter unsupported modes out.
> 
> Also, if the "ldb" clock and the pixel clock are sibling in clock
> tree, use clk_round_rate() to validate the pixel clock rate against
> the "ldb" clock.  This is not done in display controller driver
> because drm_crtc_helper_funcs::mode_valid() may not decide to do
> the validation or not if multiple encoders are connected to the CRTC,
> e.g., i.MX93 LCDIF may connect with MIPI DSI controller, LDB and
> parallel display output simultaneously.
> 
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
>  drivers/gpu/drm/bridge/fsl-ldb.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
> index b559f3e0bef6..ee8471c86617 100644
> --- a/drivers/gpu/drm/bridge/fsl-ldb.c
> +++ b/drivers/gpu/drm/bridge/fsl-ldb.c
> @@ -11,6 +11,7 @@
>  #include <linux/of_graph.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> +#include <linux/units.h>
>  
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
> @@ -64,6 +65,7 @@ struct fsl_ldb_devdata {
>  	u32 lvds_ctrl;
>  	bool lvds_en_bit;
>  	bool single_ctrl_reg;
> +	bool ldb_clk_pixel_clk_sibling;
>  };
>  
>  static const struct fsl_ldb_devdata fsl_ldb_devdata[] = {
> @@ -74,11 +76,13 @@ static const struct fsl_ldb_devdata fsl_ldb_devdata[] = {
>  	[IMX8MP_LDB] = {
>  		.ldb_ctrl = 0x5c,
>  		.lvds_ctrl = 0x128,
> +		.ldb_clk_pixel_clk_sibling = true,
>  	},
>  	[IMX93_LDB] = {
>  		.ldb_ctrl = 0x20,
>  		.lvds_ctrl = 0x24,
>  		.lvds_en_bit = true,
> +		.ldb_clk_pixel_clk_sibling = true,
>  	},
>  };
>  
> @@ -269,11 +273,29 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
>  		   const struct drm_display_info *info,
>  		   const struct drm_display_mode *mode)
>  {
> +	unsigned long link_freq, pclk_rate, rounded_pclk_rate;
>  	struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
>  
>  	if (mode->clock > (fsl_ldb_is_dual(fsl_ldb) ? 160000 : 80000))
>  		return MODE_CLOCK_HIGH;
>  
> +	/* Validate "ldb" clock rate. */
> +	link_freq = fsl_ldb_link_frequency(fsl_ldb, mode->clock);
> +	if (link_freq != clk_round_rate(fsl_ldb->clk, link_freq))
> +		return MODE_NOCLOCK;
> +
> +	/*
> +	 * Use "ldb" clock to validate pixel clock rate,
> +	 * if the two clocks are sibling.
> +	 */
> +	if (fsl_ldb->devdata->ldb_clk_pixel_clk_sibling) {
> +		pclk_rate = mode->clock * HZ_PER_KHZ;
> +
> +		rounded_pclk_rate = clk_round_rate(fsl_ldb->clk, pclk_rate);
> +		if (rounded_pclk_rate != pclk_rate)
> +			return MODE_NOCLOCK;
> +	}
> +

I guess this is to workaround the fact that the parent rate would be
changed, and thus the sibling rate as well? This should be documented in
a comment if so.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 273 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240930/80f377a6/attachment-0001.sig>