[PATCH v1 1/1] drm/mediatek: Add return value check when reading DPCD

[Liankun Yang]

Returns the number of bytes transferred (1) on success.
Check the return value to confirm that AUX communication is successful.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")

Signed-off-by: Liankun Yang <liankun.yang at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index d8796a904eca..3cab65345d1e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -2018,6 +2018,7 @@ static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge)
 	enum drm_connector_status ret = connector_status_disconnected;
 	bool enabled = mtk_dp->enabled;
 	u8 sink_count = 0;
+	size_t value;
 
 	if (!mtk_dp->train_info.cable_plugged_in)
 		return ret;
@@ -2032,7 +2033,12 @@ static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge)
 	 * function, we just need to check the HPD connection to check
 	 * whether we connect to a sink device.
 	 */
-	drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, &sink_count);
+	value = drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, &sink_count);
+	if (value < 0) {
+		drm_err(mtk_dp->drm_dev, "Failed to read DP Sink Count: %zd\n", value);
+		return ret;
+	}
+
 	if (DP_GET_SINK_COUNT(sink_count))
 		ret = connector_status_connected;
 
-- 
2.45.2