[PATCH 1/3] drm/panthor: Call panthor_gpu_coherency_init() after PM resume()

[Boris Brezillon]

When the device is coherent, panthor_gpu_coherency_init() will read
GPU_COHERENCY_FEATURES to make sure the GPU supports the ACE-Lite
coherency protocol, which will fail if the clocks/power-domains are
not enabled when the read is done. Move the
panthor_gpu_coherency_init() call after the device has been resumed
to prevent that.

Fixes: dd7db8d911a1 ("drm/panthor: Explicitly set the coherency mode")
Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
---
 drivers/gpu/drm/panthor/panthor_device.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panthor/panthor_device.c b/drivers/gpu/drm/panthor/panthor_device.c
index a9da1d1eeb70..c73c1608d6e6 100644
--- a/drivers/gpu/drm/panthor/panthor_device.c
+++ b/drivers/gpu/drm/panthor/panthor_device.c
@@ -171,10 +171,6 @@ int panthor_device_init(struct panthor_device *ptdev)
 	struct page *p;
 	int ret;
 
-	ret = panthor_gpu_coherency_init(ptdev);
-	if (ret)
-		return ret;
-
 	init_completion(&ptdev->unplug.done);
 	ret = drmm_mutex_init(&ptdev->base, &ptdev->unplug.lock);
 	if (ret)
@@ -247,6 +243,10 @@ int panthor_device_init(struct panthor_device *ptdev)
 	if (ret)
 		goto err_rpm_put;
 
+	ret = panthor_gpu_coherency_init(ptdev);
+	if (ret)
+		return ret;
+
 	ret = panthor_mmu_init(ptdev);
 	if (ret)
 		goto err_unplug_gpu;
-- 
2.48.1