[PATCH 1/3] dt-bindings: st7571-i2c: Add Sitronix ST7571 panel bindings

[Krzysztof Kozlowski]

On Wed, Apr 02, 2025 at 08:12:10AM +0200, Marcus Folkesson wrote:
> Sitronix ST7571 is a 4bit gray scale dot matrix LCD controller.
> The controller has a SPI, I2C and 8bit parallel interface, this is for
> the I2C interface only.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
> ---
>  .../bindings/display/sitronix,st7571-i2c.yaml      | 71 ++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/sitronix,st7571-i2c.yaml b/Documentation/devicetree/bindings/display/sitronix,st7571-i2c.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..6e5e0994a98db646a37bb17c4289332546c9266e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sitronix,st7571-i2c.yaml

Drop i2c

> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/sitronix,st7571-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sitronix ST7571 Display Panels
> +
> +maintainers:
> +  - Marcus Folkesson <marcus.folkesson at gmail.com>
> +
> +properties:
> +  compatible:
> +    const: sitronix,st7571-i2c

Drop i2c

> +
> +  reg:
> +    description: I2C address of the LCD controller

Drop description


> +    maxItems: 1
> +
> +  sitronix,panel-width-mm:
> +    description: physical panel width [mm]
> +
> +  sitronix,panel-height-mm:
> +    description: physical panel height [mm]

No, use standard properties.

> +
> +  sitronix,panel-nlines:
> +    description: Number of lines in the panel
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 1
> +    maximum: 128
> +    default: 128

Ditto

> +
> +  sitronix,panel-start-line:
> +    description: Start line of the panel
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 127
> +    default: 0

Ditto

> +
> +  reset-gpios:
> +    description: GPIO connected to the RST_N signal.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios

Keep same order as in properties.

> +  - sitronix,panel-width-mm
> +  - sitronix,panel-height-mm
> +

Missing ref to panels schema.

> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #

Drop

> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        display at 3f {

Look how this is called in other bindings... The binding and example are
not following existing code. Why? Why doing something entirely
different?

Best regards,
Krzysztof