[PATCH 04/10] panel/auo-a030jtn01: Use refcounted allocation in place of devm_kzalloc()

[Imre Deak]

Hi,

On Tue, Apr 01, 2025 at 12:03:47PM -0400, Anusha Srivatsa wrote:
> Move to using the new API devm_drm_panel_alloc() to allocate the
> panel.
> 
> Signed-off-by: Anusha Srivatsa <asrivats at redhat.com>
> ---
>  drivers/gpu/drm/panel/panel-auo-a030jtn01.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> index 77604d6a4e72c915c40575be0e47810c90b4ed71..83529b1c2bac2e29f41efaf4028950214b056a95 100644
> --- a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> +++ b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> @@ -200,9 +200,10 @@ static int a030jtn01_probe(struct spi_device *spi)
>  
>  	spi->mode |= SPI_MODE_3 | SPI_3WIRE;
>  
> -	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> +	panel = devm_drm_panel_alloc(dev, struct a030jtn01, panel,
> +				     &a030jtn01_funcs, DRM_MODE_CONNECTOR_DPI);

This doesn't compile and (yet) it's pushed already to drm-tip. AFAIU
it's supposed to be
	priv = devm_drm_panel_alloc(...);

> +	if (IS_ERR(panel))
> +		return PTR_ERR(panel);
>  
>  	priv->spi = spi;
>  	spi_set_drvdata(spi, priv);
> @@ -223,9 +224,6 @@ static int a030jtn01_probe(struct spi_device *spi)
>  	if (IS_ERR(priv->reset_gpio))
>  		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO");
>  
> -	drm_panel_init(&priv->panel, dev, &a030jtn01_funcs,
> -		       DRM_MODE_CONNECTOR_DPI);
> -
>  	err = drm_panel_of_backlight(&priv->panel);
>  	if (err)
>  		return err;
> 
> -- 
> 2.48.1
>