[PATCH v2 00/15] Add support for DU and DSI on the Renesas RZ/V2H(P) SoC
Prabhakar
prabhakar.csengg at gmail.com
Tue Apr 8 20:08:57 UTC 2025
From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
Hi All,
This patch series adds support for the Display Unit (DU) and MIPI DSI
interface on the Renesas RZ/V2H(P) SoC. The initial patches add PLLDSI
clocks and reset entries for the DSI and LCDC and the later patches add
support for the DU and DSI drivers. The DU block is similar to the
RZ/G2L SoC, but the DSI interface is slightly different. The patches
include updates to the device tree bindings, clock and reset
controllers, and the DU driver to accommodate these changes.
Note, my initial intention was to split the clock patches and the DU/DSI
driver patches into two separate series. However, I found that sending
them together will make it easier for the reviewers to understand clock
related changes.
Note, the clock patches apply on top of the below patch series:
- https://lore.kernel.org/all/20250407165202.197570-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
v1->v2:
- Rebased the changes on top of v6.15-rc1
- Kept the sort order for schema validation
- Added `port at 1: false` for RZ/V2H(P) SoC
- Added enum for RZ/V2H as suggested by Krzysztof as the list
will grow in the future (while adding RZ/G3E SoC).
- Added Reviewed-by tag from Biju and Krzysztof.
- Replaced individual flags as reset flag
- Dropped unused macros
- Added missing LPCLK flag to rzvv2h info
- Dropped FCP and VSP documentation patch and sent them separately
Cheers,
Prabhakar
Lad Prabhakar (15):
clk: renesas: rzv2h-cpg: Add support for DSI clocks
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
dt-bindings: display: renesas,rzg2l-du: Add support for RZ/V2H(P) SoC
dt-bindings: display: bridge: renesas,dsi: Add support for RZ/V2H(P)
SoC
drm: renesas: rz-du: Add support for RZ/V2H(P) SoC
drm: renesas: rz-du: mipi_dsi: Add min check for VCLK range
drm: renesas: rz-du: mipi_dsi: Simplify HSFREQ calculation
drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation
drm: renesas: rz-du: mipi_dsi: Add OF data support
drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency
calculations
drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP support
drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for
RZ/V2H(P)
drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring
VCLK and mode validation
drm: renesas: rz-du: mipi_dsi: Add support for LPCLK handling
drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
.../bindings/display/bridge/renesas,dsi.yaml | 116 +++-
.../bindings/display/renesas,rzg2l-du.yaml | 23 +-
drivers/clk/renesas/r9a09g057-cpg.c | 63 ++
drivers/clk/renesas/rzv2h-cpg.c | 284 ++++++++
drivers/clk/renesas/rzv2h-cpg.h | 17 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 11 +
.../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 608 +++++++++++++++++-
.../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h | 36 +-
include/linux/clk/renesas-rzv2h-dsi.h | 207 ++++++
9 files changed, 1299 insertions(+), 66 deletions(-)
create mode 100644 include/linux/clk/renesas-rzv2h-dsi.h
--
2.49.0
More information about the dri-devel
mailing list