[PATCH v8 00/13] Add eDP support for RK3588

Andy Yan andyshrk at 163.com
Thu Apr 10 12:36:07 UTC 2025


Hello Heiko,
   Could you take this series ? They have already got the necessary R-B and Ack. 
I think Damon still has some patches for connector decoupling. With this series have been merged earlier. 
His new patches can have fewer dependencies.
    

At 2025-03-10 18:41:01, "Damon Ding" <damon.ding at rock-chips.com> wrote:
>Picked from:
>https://patchwork.kernel.org/project/linux-rockchip/list/?series=936932
>
>These patchs have been tested with a 1536x2048p60 eDP panel on
>RK3588S EVB1 board, and HDMI 1080P/4K display also has been verified
>on RK3588 EVB1 board. Furthermore, the eDP display has been rechecked
>on RK3399 sapphire excavator board.
>
>Patch 1~3   are preparations for the RK3588 eDP support on both Analogix
>            side.
>Patch 4~8   are to support to get panel from the DP AUX bus.
>Patch 9~11  are the RK3588 Analogix DP driver support.
>Patch 12    is the addition of RK3588 eDP0 node.
>Patch 13    is to enable the eDP0 display on RK3588S EVB1 board.
>
>Damon Ding (13):
>  drm/bridge: analogix_dp: Add irq flag IRQF_NO_AUTOEN instead of
>    calling disable_irq()
>  drm/bridge: analogix_dp: Remove CONFIG_PM related check in
>    analogix_dp_bind()/analogix_dp_unbind()
>  drm/bridge: analogix_dp: Add support for phy configuration.
>  dt-bindings: display: rockchip: analogix-dp: Add support to get panel
>    from the DP AUX bus
>  drm/bridge: analogix_dp: Support to get &analogix_dp_device.plat_data
>    and &analogix_dp_device.aux
>  drm/bridge: analogix_dp: Add support to get panel from the DP AUX bus
>  drm/bridge: analogix_dp: Add support for
>    &drm_dp_aux.wait_hpd_asserted()
>  drm/rockchip: analogix_dp: Add support to get panel from the DP AUX
>    bus
>  dt-bindings: display: rockchip: analogix-dp: Add support for RK3588
>  drm/bridge: analogix_dp: Add support for RK3588
>  drm/rockchip: analogix_dp: Add support for RK3588
>  arm64: dts: rockchip: Add eDP0 node for RK3588
>  arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board
>
> .../rockchip/rockchip,analogix-dp.yaml        |  25 ++++-
> arch/arm64/boot/dts/rockchip/rk3588-base.dtsi |  28 +++++
> .../boot/dts/rockchip/rk3588s-evb1-v10.dts    |  55 ++++++++++
> .../drm/bridge/analogix/analogix_dp_core.c    |  85 +++++++++------
> .../gpu/drm/bridge/analogix/analogix_dp_reg.c |  52 +++++++++
> drivers/gpu/drm/rockchip/Kconfig              |   1 +
> .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 103 ++++++++++++++++--
> include/drm/bridge/analogix_dp.h              |   7 +-
> 8 files changed, 310 insertions(+), 46 deletions(-)
>
>-- 
>2.34.1
>


More information about the dri-devel mailing list