[PATCH v5 1/3] arm64: dts: qcom: x1e80100: add epd hpd pinctrl

[Johan Hovold]

On Wed, Apr 02, 2025 at 03:36:32PM +0100, Christopher Obbard wrote:
> Add edp_hpd_active pinctrl to the X1E80100 device tree.

Please squash this one with the patch adding the user.
 
> Signed-off-by: Christopher Obbard <christopher.obbard at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 46b79fce92c90d969e3de48bc88e27915d1592bb..5b1b80c445404fd02e9f6e5dab207610b03ff9c5 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -6389,6 +6389,11 @@ data-pins {
>  					bias-pull-up;
>  				};
>  			};
> +
> +			edp_hpd_active: edp-hpd-active-state {

Please keep the nodes sorted by name.

> +				pins = "gpio119";
> +				function = "edp_hot";

There is no "edp_hot" function on x1e so I wonder how this has been
tested.

As I mentioned in a comment to an earlier revision this pin has been
configured by the firmware as "edp0_hot".

Since there is also an "edp1_hot" pin, this needs to be reflected in the
node name and label.

Pin configurations really do belong in board files, but unfortunately
this was not followed for x1e. You should still include the bias
configuration (somewhere).

> +			};
>  		};
>  
>  		stm at 10002000 {

Johan