[PATCH 08/13] drm/dp: Modify drm_edp_backlight_set_level

[Suraj Kandpal]

Modify drm_edp_backlight_set_level to be able to set the value
for register in DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We multiply
the level with 1000 since we get the value in Nits and the
register accepts it in milliNits.

Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
---
 drivers/gpu/drm/display/drm_dp_helper.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index c4c52fb37191..dc0bda84d211 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -3936,20 +3936,28 @@ int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_bac
 				u32 level)
 {
 	int ret;
-	u8 buf[2] = { 0 };
+	unsigned int offset = DP_EDP_BACKLIGHT_BRIGHTNESS_MSB;
+	u8 buf[3] = { 0 };
 
 	/* The panel uses the PWM for controlling brightness levels */
-	if (!bl->aux_set)
+	if (!(bl->aux_set || bl->luminance_set))
 		return 0;
 
-	if (bl->lsb_reg_used) {
+	if (bl->luminance_set) {
+		level = level * 1000;
+		level &= 0xffffff;
+		buf[0] = (level & 0x0000ff);
+		buf[1] = (level & 0x00ff00) >> 8;
+		buf[2] = (level & 0xff0000) >> 16;
+		offset = DP_EDP_PANEL_TARGET_LUMINANCE_VALUE;
+	} else if (bl->lsb_reg_used) {
 		buf[0] = (level & 0xff00) >> 8;
 		buf[1] = (level & 0x00ff);
 	} else {
 		buf[0] = level;
 	}
 
-	ret = drm_dp_dpcd_write_data(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, sizeof(buf));
+	ret = drm_dp_dpcd_write_data(aux, offset, buf, sizeof(buf));
 	if (ret < 0) {
 		drm_err(aux->drm_dev,
 			"%s: Failed to write aux backlight level: %d\n",
-- 
2.34.1