[PATCH v3 15/15] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
Biju Das
biju.das.jz at bp.renesas.com
Sat Apr 19 07:28:15 UTC 2025
Hi Prabhakar,
Thanks for the patch.
> -----Original Message-----
> From: Prabhakar <prabhakar.csengg at gmail.com>
> Sent: 18 April 2025 19:47
> Subject: [PATCH v3 15/15] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>
> Add DSI support for Renesas RZ/V2H(P) SoC.
>
> Co-developed-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> ---
> v2->v3:
> - Simplifed V2H DSI timings array to save space
> - Switched to use fsleep() instead of udelay()
>
> v1->v2:
> - Dropped unused macros
> - Added missing LPCLK flag to rzvv2h info
> ---
> .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 344 ++++++++++++++++++
> .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h | 34 ++
> 2 files changed, 378 insertions(+)
>
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-
> du/rzg2l_mipi_dsi.c
> index 133a8f306d47..a957b6c5f28d 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> @@ -5,6 +5,7 @@
> * Copyright (C) 2022 Renesas Electronics Corporation
> */
> #include <linux/clk.h>
> +#include <linux/clk/renesas-rzv2h-dsi.h>
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> @@ -32,6 +33,9 @@
> #define RZ_MIPI_DSI_FEATURE_16BPP BIT(1)
> #define RZ_MIPI_DSI_FEATURE_LPCLK BIT(2)
>
> +#define RZV2H_MIPI_DPHY_FOUT_MIN_IN_MEGA (80 * MEGA)
> +#define RZV2H_MIPI_DPHY_FOUT_MAX_IN_MEGA (1500 * MEGA)
> +
> struct rzg2l_mipi_dsi;
>
> struct rzg2l_mipi_dsi_hw_info {
> @@ -42,6 +46,7 @@ struct rzg2l_mipi_dsi_hw_info {
> u64 *hsfreq_millihz);
> unsigned int (*dphy_mode_clk_check)(struct rzg2l_mipi_dsi *dsi,
> unsigned long mode_freq);
> + const struct rzv2h_pll_div_limits *cpg_dsi_limits;
> u32 phy_reg_offset;
> u32 link_reg_offset;
> unsigned long max_dclk;
> @@ -49,6 +54,11 @@ struct rzg2l_mipi_dsi_hw_info {
> u8 features;
> };
>
> +struct rzv2h_dsi_mode_calc {
> + unsigned long mode_freq;
> + u64 mode_freq_hz;
> +};
> +
> struct rzg2l_mipi_dsi {
> struct device *dev;
> void __iomem *mmio;
> @@ -70,6 +80,18 @@ struct rzg2l_mipi_dsi {
> unsigned int num_data_lanes;
> unsigned int lanes;
> unsigned long mode_flags;
> +
> + struct rzv2h_dsi_mode_calc mode_calc;
> + struct rzv2h_plldsi_parameters dsi_parameters; };
> +
> +static const struct rzv2h_pll_div_limits rzv2h_plldsi_div_limits = {
> + .fvco = { .min = 1050 * MEGA, .max = 2100 * MEGA },
> + .m = { .min = 64, .max = 1023 },
> + .p = { .min = 1, .max = 4 },
> + .s = { .min = 0, .max = 5 },
> + .k = { .min = -32768, .max = 32767 },
> + .csdiv = { .min = 1, .max = 1 },
> };
>
> static inline struct rzg2l_mipi_dsi *
> @@ -186,6 +208,155 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
> },
> };
>
> +struct rzv2h_mipi_dsi_timings {
> + const u8 *hsfreq;
> + u8 len;
> + u8 start_index;
> +};
> +
> +enum {
> + TCLKPRPRCTL,
> + TCLKZEROCTL,
> + TCLKPOSTCTL,
> + TCLKTRAILCTL,
> + THSPRPRCTL,
> + THSZEROCTL,
> + THSTRAILCTL,
> + TLPXCTL,
> + THSEXITCTL,
> +};
> +
> +static const u8 tclkprprctl[] = {
> + 15, 26, 37, 47, 58, 69, 79, 90, 101, 111, 122, 133, 143, 150, };
> +
> +static const u8 tclkzeroctl[] = {
> + 9, 11, 13, 15, 18, 21, 23, 24, 25, 27, 29, 31, 34, 36, 38,
> + 41, 43, 45, 47, 50, 52, 54, 57, 59, 61, 63, 66, 68, 70, 73,
> + 75, 77, 79, 82, 84, 86, 89, 91, 93, 95, 98, 100, 102, 105,
> + 107, 109, 111, 114, 116, 118, 121, 123, 125, 127, 130, 132,
> + 134, 137, 139, 141, 143, 146, 148, 150, };
> +
> +static const u8 tclkpostctl[] = {
> + 8, 21, 34, 48, 61, 74, 88, 101, 114, 128, 141, 150, };
> +
> +static const u8 tclktrailctl[] = {
> + 14, 25, 37, 48, 59, 71, 82, 94, 105, 117, 128, 139, 150, };
> +
> +static const u8 thsprprctl[] = {
> + 11, 19, 29, 40, 50, 61, 72, 82, 93, 103, 114, 125, 135, 146, 150, };
> +
> +static const u8 thszeroctl[] = {
> + 18, 24, 29, 35, 40, 46, 51, 57, 62, 68, 73, 79, 84, 90,
> + 95, 101, 106, 112, 117, 123, 128, 134, 139, 145, 150, };
> +
> +static const u8 thstrailctl[] = {
> + 10, 21, 32, 42, 53, 64, 75, 85, 96, 107, 118, 128, 139, 150, };
> +
> +static const u8 tlpxctl[] = {
> + 13, 26, 39, 53, 66, 79, 93, 106, 119, 133, 146, 150,
> +};
> +
> +static const u8 thsexitctl[] = {
> + 15, 23, 31, 39, 47, 55, 63, 71, 79, 87,
> + 95, 103, 111, 119, 127, 135, 143, 150, };
> +
> +static const struct rzv2h_mipi_dsi_timings rzv2h_dsi_timings_tables[] = {
> + [TCLKPRPRCTL] = {
> + .hsfreq = tclkprprctl,
> + .len = ARRAY_SIZE(tclkprprctl),
> + .start_index = 0,
> + },
> + [TCLKZEROCTL] = {
> + .hsfreq = tclkzeroctl,
> + .len = ARRAY_SIZE(tclkzeroctl),
> + .start_index = 2,
> + },
> + [TCLKPOSTCTL] = {
> + .hsfreq = tclkpostctl,
> + .len = ARRAY_SIZE(tclkpostctl),
> + .start_index = 6,
> + },
> + [TCLKTRAILCTL] = {
> + .hsfreq = tclktrailctl,
> + .len = ARRAY_SIZE(tclktrailctl),
> + .start_index = 1,
> + },
> + [THSPRPRCTL] = {
> + .hsfreq = thsprprctl,
> + .len = ARRAY_SIZE(thsprprctl),
> + .start_index = 0,
> + },
> + [THSZEROCTL] = {
> + .hsfreq = thszeroctl,
> + .len = ARRAY_SIZE(thszeroctl),
> + .start_index = 0,
> + },
> + [THSTRAILCTL] = {
> + .hsfreq = thstrailctl,
> + .len = ARRAY_SIZE(thstrailctl),
> + .start_index = 3,
> + },
> + [TLPXCTL] = {
> + .hsfreq = tlpxctl,
> + .len = ARRAY_SIZE(tlpxctl),
> + .start_index = 0,
> + },
> + [THSEXITCTL] = {
> + .hsfreq = thsexitctl,
> + .len = ARRAY_SIZE(thsexitctl),
> + .start_index = 1,
> + },
> +};
> +
> +static u16 rzv2h_dphy_find_ulpsexit(unsigned long freq) {
> + const unsigned long hsfreq[] = {
Please don't populate the read-only const array offsets on the stack
but instead make it static, see [1] and [2]
[1]
https://lkml.iu.edu/2201.1/00608.html
[2]
https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20250317144606.478431-1-colin.i.king@gmail.com/
> + 1953125UL,
> + 3906250UL,
> + 7812500UL,
> + 15625000UL,
> + };
> + const u16 ulpsexit[] = {49, 98, 195, 391};
Same here.
Cheers,
Biju
More information about the dri-devel
mailing list