[PATCH] drm: panel: jd9365da: fix reset signal polarity in unprepare

[Neil Armstrong]

On 17/04/2025 21:55, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve at dimonoff.com>
> 
> commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
> fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().
> 
> It was not done in jadard_unprepare() because of an incorrect assumption
> about reset line handling in power off mode. After looking into the
> datasheet, it now appears that before disabling regulators, the reset line
> is deasserted first, and if reset_before_power_off_vcioo is true, then the
> reset line is asserted.
> 
> Fix reset polarity by inverting gpiod_set_value() second argument in
> in jadard_unprepare().
> 
> Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
> Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel")
> Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
> Cc: stable at vger.kernel.org
> Signed-off-by: Hugo Villeneuve <hvilleneuve at dimonoff.com>
> ---
>   drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> index 7d68a8acfe2ea..eb0f8373258c3 100644
> --- a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> +++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> @@ -129,11 +129,11 @@ static int jadard_unprepare(struct drm_panel *panel)
>   {
>   	struct jadard *jadard = panel_to_jadard(panel);
>   
> -	gpiod_set_value(jadard->reset, 1);
> +	gpiod_set_value(jadard->reset, 0);
>   	msleep(120);
>   
>   	if (jadard->desc->reset_before_power_off_vcioo) {
> -		gpiod_set_value(jadard->reset, 0);
> +		gpiod_set_value(jadard->reset, 1);
>   
>   		usleep_range(1000, 2000);
>   	}
> 
> base-commit: 7adf8b1afc14832de099f9e178f08f91dc0dd6d0

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>