[PATCH v3 2/3] drm/st7571-i2c: add support for Sitronix ST7571 LCD controller

[Marcus Folkesson]

Hello Javier,

On Tue, Apr 08, 2025 at 12:44:46PM +0200, Javier Martinez Canillas wrote:
> Marcus Folkesson <marcus.folkesson at gmail.com> writes:
> 
> Hello Marcus,
> 
> > Sitronix ST7571 is a 4bit gray scale dot matrix LCD controller.
> > The controller has a SPI, I2C and 8bit parallel interface, this
> > driver is for the I2C interface only.
> >
> 
> I would structure the driver differently. For example, what was done
> for the Solomon SSD130X display controllers, that also support these
> three interfaces:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/solomon
> 
> Basically, it was split in a ssd130x.c module that's agnostic of the
> transport interface and implements all the core logic for the driver.
> 
> And a set of different modules that have the interface specific bits:
> ssd130x-i2c.c and ssd130x-spi.c.
> 
> That way, adding for example SPI support to your driver would be quite
> trivial and won't require any refactoring. Specially since you already
> are using regmap, which abstracts away the I2C interface bits.
> 
> > Reviewed-by: Thomas Zimmermann <tzimmrmann at suse.de>
> > Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
> > ---
> >  drivers/gpu/drm/tiny/Kconfig      |  11 +
> >  drivers/gpu/drm/tiny/Makefile     |   1 +
> >  drivers/gpu/drm/tiny/st7571-i2c.c | 721 ++++++++++++++++++++++++++++++++++++++
> 
> I personally think that the tiny sub-directory is slowly becoming a
> dumping ground for small drivers. Instead, maybe we should create a
> drivers/gpu/drm/sitronix/ sub-dir and put all Sitronix drivers there?
> 
> So far we have drivers in tiny for: ST7735R, ST7586 and ST7571 with
> your driver. And also have a few more Sitronix drivers in the panel
> sub-directory (although those likely should remain there).
> 
> I have a ST7565S and plan to write a driver for it. And I know someone
> who is working on a ST7920 driver. That would be 5 Sitronix drivers and
> the reason why I think that a dedicated sub-dir would be more organized.

I'm looking into moving all the (tiny) Sitronix drivers into their own
subdirectory.
When doing that, should I replace the TINYDRM part with DRM for those drivers?
E.g. CONFIG_TINYDRM_ST7735R -> CONFIG_DRM_ST7735R.

Or do we want to keep the config name intact?

Best regards,
Marcus Folkesson





-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20250424/3c0b5c04/attachment.sig>