[PATCH RFC v2 3/5] drm/panel: ilitek-ili9881c: Add support for two-lane configuration
Kory Maincent
kory.maincent at bootlin.com
Thu Apr 24 15:07:41 UTC 2025
Enable support for two-lane configuration which is done by setting the
LANSEL_SW_EN and LANSEL_SW bits in the Pad Control register.
Use the data-lanes device tree parameter to configure the number of lanes.
The default configuration remains set to four lanes.
Signed-off-by: Kory Maincent <kory.maincent at bootlin.com>
---
Change in v2:
- Read the data-lanes parameter from the port endpoint and use
drm_of_get_data_lanes_count instead of of_property_read_u32.
---
drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 33 +++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index 28cd7560e5db1d5734b10babdb4e4e553c6e07d0..2e38dea28336f445cb6a074dbbec006f0659287a 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -16,6 +16,7 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
+#include <drm/drm_of.h>
#include <drm/drm_panel.h>
#include <video/mipi_display.h>
@@ -1263,6 +1264,21 @@ static int ili9881c_send_cmd_data(struct ili9881c *ctx, u8 cmd, u8 data)
return 0;
}
+static int ili9881c_set_lanes_cfg(struct ili9881c *ctx)
+{
+ int ret;
+
+ if (ctx->dsi->lanes != 2)
+ /* Nothing to do */
+ return 0;
+
+ ret = ili9881c_switch_page(ctx, 1);
+ if (ret)
+ return ret;
+
+ return ili9881c_send_cmd_data(ctx, 0xB7, 0x3);
+}
+
static int ili9881c_prepare(struct drm_panel *panel)
{
struct ili9881c *ctx = panel_to_ili9881c(panel);
@@ -1295,6 +1311,10 @@ static int ili9881c_prepare(struct drm_panel *panel)
return ret;
}
+ ret = ili9881c_set_lanes_cfg(ctx);
+ if (ret)
+ return ret;
+
ret = ili9881c_switch_page(ctx, 0);
if (ret)
return ret;
@@ -1503,8 +1523,9 @@ static const struct drm_panel_funcs ili9881c_funcs = {
static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
{
+ struct device_node *endpoint;
struct ili9881c *ctx;
- int ret;
+ int ret, lanes;
ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
@@ -1545,11 +1566,19 @@ static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
if (ret)
return ret;
+ endpoint = of_graph_get_endpoint_by_regs(dsi->dev.of_node, -1, -1);
+ lanes = drm_of_get_data_lanes_count(endpoint, 2, 4);
+ of_node_put(endpoint);
+ if (lanes == -EINVAL)
+ lanes = 4;
+ else if (lanes < 0)
+ return lanes;
+
drm_panel_add(&ctx->panel);
dsi->mode_flags = ctx->desc->mode_flags;
dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->lanes = 4;
+ dsi->lanes = lanes;
return mipi_dsi_attach(dsi);
}
--
2.34.1
More information about the dri-devel
mailing list