[PATCH v5 3/5] arm64: dts: qcom: Add initial support for MSM8937

[barnabas.czeman at mainlining.org]

On 2025-04-25 21:26, Konrad Dybcio wrote:
> On 4/25/25 5:13 PM, barnabas.czeman at mainlining.org wrote:
>> On 2025-04-25 11:57, Konrad Dybcio wrote:
>>> On 4/23/25 4:46 PM, barnabas.czeman at mainlining.org wrote:
>>>> On 2025-04-23 16:03, Konrad Dybcio wrote:
>>>>> On 4/21/25 10:18 PM, Barnabás Czémán wrote:
>>>>>> From: Dang Huynh <danct12 at riseup.net>
>>>>>> 
>>>>>> Add initial support for MSM8937 SoC.
>>>>>> 
>>>>>> Signed-off-by: Dang Huynh <danct12 at riseup.net>
>>>>>> Co-developed-by: Barnabás Czémán <barnabas.czeman at mainlining.org>
>>>>>> Signed-off-by: Barnabás Czémán <barnabas.czeman at mainlining.org>
>>>>>> ---
>>> 
>>> [...]
>>> 
>>>>>> +            gpu_opp_table: opp-table {
>>>>>> +                compatible = "operating-points-v2";
>>>>>> +
>>>>>> +                opp-19200000 {
>>>>>> +                    opp-hz = /bits/ 64 <19200000>;
>>>>>> +                    opp-supported-hw = <0xff>;
>>>>> 
>>>>> The comment from the previous revision still stands
>>>> If i remove opp-supported-hw i will got -22 EINVAL messages and the 
>>>> opp will be not fine.
>>> 
>>> Right, I have a series pending to improve this situation a bit..
>>> 
>>> In the meantime, you should be able to define the nvmem cell and
>>> fill in meaningful values for this platform
>> As I wrote in the previous revision there is no nvmem for GPU on 
>> msm8937 only on msm8940.
> 
> This seems not to be the case
> 
> https://github.com/penglezos/android_kernel_xiaomi_msm8953/blob/pie/arch/arm/boot/dts/qcom/msm8937.dtsi#L2046-L2191
> 
These are on msm-4.9 was moved to msm8940.dtsi
https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.10.6.2.c26-01500-89xx.0/arch/arm64/boot/dts/qcom/msm8937-gpu.dtsi#L162
https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.10.6.2.c26-01500-89xx.0/arch/arm64/boot/dts/qcom/msm8940.dtsi#L600
475 MHz and 500 MHz is for msm8940 at least based on 4.9


> Konrad