[PATCH v5 06/24] clk: qcom: dispcc-sm8750: Fix setting rate byte and pixel clocks

[Krzysztof Kozlowski]

On SM8750 the setting rate of pixel and byte clocks, while the parent
DSI PHY PLL, fails with:

  disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.

DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
CMN_CTRL_0 asserted.

Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
enabled during rate changes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Patch is independent and can go via separate tree. Including here for
complete picture of clock debugging issues.

Changes in v5:
1. New patch
---
 drivers/clk/qcom/dispcc-sm8750.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/dispcc-sm8750.c b/drivers/clk/qcom/dispcc-sm8750.c
index 877b40d50e6ff5501df16edcffb6cf3322c65977..d86f3def6dd06b6f6f7a25018a856dcc86fc48eb 100644
--- a/drivers/clk/qcom/dispcc-sm8750.c
+++ b/drivers/clk/qcom/dispcc-sm8750.c
@@ -393,7 +393,7 @@ static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
 		.name = "disp_cc_mdss_byte0_clk_src",
 		.parent_data = disp_cc_parent_data_1,
 		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_byte2_ops,
 	},
 };
@@ -712,7 +712,7 @@ static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
 		.name = "disp_cc_mdss_pclk0_clk_src",
 		.parent_data = disp_cc_parent_data_1,
 		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_pixel_ops,
 	},
 };

-- 
2.45.2