[PATCH 01/13] drm/panel: ilitek-ili9881c: turn off power-supply when init fails

[neil.armstrong at linaro.org]

On 07/07/2025 18:48, Heiko Stuebner wrote:
> The prepare function turns on the power-supply regulator first, when
> preparing the display. But in an error case, just returns the error
> code, but does not power off the regulator again, fix that.
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>   drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 12 ++++++++----
>   1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> index 28cd7560e5db..d7a17dca2a9c 100644
> --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> @@ -1292,7 +1292,7 @@ static int ili9881c_prepare(struct drm_panel *panel)
>   						      instr->arg.cmd.data);
>   
>   		if (ret)
> -			return ret;
> +			goto disable_power;
>   	}
>   
>   	ret = ili9881c_switch_page(ctx, 0);
> @@ -1304,18 +1304,22 @@ static int ili9881c_prepare(struct drm_panel *panel)
>   					 &ctx->address_mode,
>   					 sizeof(ctx->address_mode));
>   		if (ret < 0)
> -			return ret;
> +			goto disable_power;
>   	}
>   
>   	ret = mipi_dsi_dcs_set_tear_on(ctx->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>   	if (ret)
> -		return ret;
> +		goto disable_power;
>   
>   	ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi);
>   	if (ret)
> -		return ret;
> +		goto disable_power;
>   
>   	return 0;
> +
> +disable_power:
> +	regulator_disable(ctx->power);
> +	return ret;
>   }
>   
>   static int ili9881c_enable(struct drm_panel *panel)

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>