[PATCH v2 07/12] drm/msm/dp: Handle internal HPD IRQ in hpd_notify()
Dmitry Baryshkov
dmitry.baryshkov at oss.qualcomm.com
Sat Aug 9 07:05:03 UTC 2025
On Fri, Aug 08, 2025 at 05:35:19PM -0700, Jessica Zhang wrote:
> Switch to using a threaded IRQ to handle HPD IRQ events and moving
> handling of internal HPD IRQ events to hpd_notify().
>
> This will simplify the handling of HPD events by unifying the handling
> of both external and internal HPD events in hpd_notify(). Also, having
> internal HPD IRQ use the DRM framework calls removes the need for msm_dp
> to track the HPD state internally.
You should describe, why are you splitting the handler into two parts
rather than just moving existing handler to be a threaded handler.
>
> Note: The setting of linked ready is moved out of
> *_send_hpd_notification() as it should only be set after the plug/unplug
> handling has been completed.
Unrelated
>
> Signed-off-by: Jessica Zhang <jessica.zhang at oss.qualcomm.com>
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 127 +++++++++++++++++++++++++-----------
> 1 file changed, 90 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 8779bcd1b27c..b9e2e368c4a8 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -96,6 +96,10 @@ struct msm_dp_display_private {
> /* wait for audio signaling */
> struct completion audio_comp;
>
> + /* HPD IRQ handling */
> + spinlock_t irq_thread_lock;
> + u32 hpd_isr_status;
> +
> /* event related only access by event thread */
> struct mutex event_mutex;
> wait_queue_head_t event_q;
> @@ -345,14 +349,8 @@ static int msm_dp_display_send_hpd_notification(struct msm_dp_display_private *d
> /* reset video pattern flag on disconnect */
> if (!hpd) {
> dp->panel->video_test = false;
> - if (!dp->msm_dp_display.is_edp)
> - drm_dp_set_subconnector_property(dp->msm_dp_display.connector,
> - connector_status_disconnected,
> - dp->panel->dpcd,
> - dp->panel->downstream_ports);
> }
>
> - dp->msm_dp_display.link_ready = hpd;
>
> drm_dbg_dp(dp->drm_dev, "type=%d hpd=%d\n",
> dp->msm_dp_display.connector_type, hpd);
> @@ -407,6 +405,8 @@ static int msm_dp_display_process_hpd_high(struct msm_dp_display_private *dp)
> dp->panel->dpcd,
> dp->panel->downstream_ports);
>
> + dp->msm_dp_display.link_ready = true;
> +
> dp->msm_dp_display.psr_supported = dp->panel->psr_cap.version && psr_enabled;
>
> dp->audio_supported = info->has_audio;
> @@ -420,7 +420,8 @@ static int msm_dp_display_process_hpd_high(struct msm_dp_display_private *dp)
>
> msm_dp_link_reset_phy_params_vx_px(dp->link);
>
> - msm_dp_display_send_hpd_notification(dp, true);
> + if (!dp->msm_dp_display.internal_hpd)
Why?
> + msm_dp_display_send_hpd_notification(dp, true);
>
> end:
> return rc;
> @@ -489,7 +490,16 @@ static int msm_dp_display_notify_disconnect(struct device *dev)
> {
> struct msm_dp_display_private *dp = dev_get_dp_display_private(dev);
>
> - msm_dp_display_send_hpd_notification(dp, false);
> + if (!dp->msm_dp_display.is_edp)
> + drm_dp_set_subconnector_property(dp->msm_dp_display.connector,
> + connector_status_disconnected,
> + dp->panel->dpcd,
> + dp->panel->downstream_ports);
> +
> + dp->msm_dp_display.link_ready = false;
> +
> + if (!dp->msm_dp_display.internal_hpd)
> + msm_dp_display_send_hpd_notification(dp, false);
>
> return 0;
> }
> @@ -1182,40 +1192,56 @@ enum drm_connector_status msm_dp_bridge_detect(struct drm_bridge *bridge)
> static irqreturn_t msm_dp_display_irq_handler(int irq, void *dev_id)
> {
> struct msm_dp_display_private *dp = dev_id;
> - irqreturn_t ret = IRQ_NONE;
> u32 hpd_isr_status;
> -
> - if (!dp) {
> - DRM_ERROR("invalid data\n");
> - return IRQ_NONE;
> - }
> + unsigned long flags;
> + irqreturn_t ret = IRQ_HANDLED;
>
> hpd_isr_status = msm_dp_aux_get_hpd_intr_status(dp->aux);
>
> if (hpd_isr_status & 0x0F) {
> drm_dbg_dp(dp->drm_dev, "type=%d isr=0x%x\n",
> dp->msm_dp_display.connector_type, hpd_isr_status);
> - /* hpd related interrupts */
> - if (hpd_isr_status & DP_DP_HPD_PLUG_INT_MASK)
> - msm_dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
>
> - if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK) {
> - msm_dp_add_event(dp, EV_IRQ_HPD_INT, 0, 0);
> - }
> + spin_lock_irqsave(&dp->irq_thread_lock, flags);
> + dp->hpd_isr_status |= hpd_isr_status;
> + ret = IRQ_WAKE_THREAD;
> + spin_unlock_irqrestore(&dp->irq_thread_lock, flags);
> + }
>
> - if (hpd_isr_status & DP_DP_HPD_REPLUG_INT_MASK) {
> - msm_dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> - msm_dp_add_event(dp, EV_HPD_PLUG_INT, 0, 3);
> - }
> + /* DP controller isr */
> + ret |= msm_dp_ctrl_isr(dp->ctrl);
>
> - if (hpd_isr_status & DP_DP_HPD_UNPLUG_INT_MASK)
> - msm_dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> + return ret;
> +}
>
> - ret = IRQ_HANDLED;
> +static irqreturn_t msm_dp_display_irq_thread(int irq, void *dev_id)
> +{
> + struct msm_dp_display_private *dp = dev_id;
> + irqreturn_t ret = IRQ_NONE;
> + unsigned long flags;
> + u32 hpd_isr_status;
> +
> + if (!dp) {
> + DRM_ERROR("invalid data\n");
> + return IRQ_NONE;
> }
>
> - /* DP controller isr */
> - ret |= msm_dp_ctrl_isr(dp->ctrl);
> + spin_lock_irqsave(&dp->irq_thread_lock, flags);
You don't need to save/restore flags in the IRQ handler.
> + hpd_isr_status = dp->hpd_isr_status;
> + dp->hpd_isr_status = 0;
> + spin_unlock_irqrestore(&dp->irq_thread_lock, flags);
> +
> + /* hpd related interrupts */
> + if (hpd_isr_status & DP_DP_HPD_PLUG_INT_MASK)
> + msm_dp_display_send_hpd_notification(dp, true);
> +
> + if (hpd_isr_status & DP_DP_HPD_UNPLUG_INT_MASK)
> + msm_dp_display_send_hpd_notification(dp, false);
> +
> + if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK)
> + msm_dp_display_send_hpd_notification(dp, true);
> +
> + ret = IRQ_HANDLED;
>
> return ret;
> }
> @@ -1231,9 +1257,13 @@ static int msm_dp_display_request_irq(struct msm_dp_display_private *dp)
> return dp->irq;
> }
>
> - rc = devm_request_irq(&pdev->dev, dp->irq, msm_dp_display_irq_handler,
> - IRQF_TRIGGER_HIGH|IRQF_NO_AUTOEN,
> - "dp_display_isr", dp);
> + spin_lock_init(&dp->irq_thread_lock);
> + irq_set_status_flags(dp->irq, IRQ_NOAUTOEN);
> + rc = devm_request_threaded_irq(&pdev->dev, dp->irq,
> + msm_dp_display_irq_handler,
> + msm_dp_display_irq_thread,
> + IRQ_TYPE_LEVEL_HIGH,
> + "dp_display_isr", dp);
>
> if (rc < 0) {
> DRM_ERROR("failed to request IRQ%u: %d\n",
> @@ -1413,6 +1443,7 @@ static int msm_dp_display_probe(struct platform_device *pdev)
> dp->wide_bus_supported = desc->wide_bus_supported;
> dp->msm_dp_display.is_edp =
> (dp->msm_dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);
> + dp->hpd_isr_status = 0;
>
> rc = msm_dp_display_get_io(dp);
> if (rc)
> @@ -1822,13 +1853,35 @@ void msm_dp_bridge_hpd_notify(struct drm_bridge *bridge,
> struct msm_dp_bridge *msm_dp_bridge = to_dp_bridge(bridge);
> struct msm_dp *msm_dp_display = msm_dp_bridge->msm_dp_display;
> struct msm_dp_display_private *dp = container_of(msm_dp_display, struct msm_dp_display_private, msm_dp_display);
> + u32 hpd_link_status = 0;
>
> - /* Without next_bridge interrupts are handled by the DP core directly */
> - if (msm_dp_display->internal_hpd)
> - return;
> + if (msm_dp_display->internal_hpd) {
Why? The .internal_hpd should be gone completely, there should be no
difference between those two paths.
> + if (pm_runtime_resume_and_get(&msm_dp_display->pdev->dev)) {
> + DRM_ERROR("failed to pm_runtime_resume\n");
> + return;
> + }
> +
> + hpd_link_status = msm_dp_aux_is_link_connected(dp->aux);
> + }
>
> - if (!msm_dp_display->link_ready && status == connector_status_connected)
> + drm_dbg_dp(dp->drm_dev, "type=%d link connected=0x%x, link_ready=%d, status=%d\n",
> + msm_dp_display->connector_type, hpd_link_status,
> + msm_dp_display->link_ready, status);
> +
> + if ((!msm_dp_display->internal_hpd || hpd_link_status == ISR_CONNECTED) &&
> + status == connector_status_connected)
> + msm_dp_hpd_plug_handle(dp, 0);
> + else if ((hpd_link_status == ISR_IRQ_HPD_PULSE_COUNT) &&
> + status == connector_status_connected)
wrong indentation
> + msm_dp_irq_hpd_handle(dp, 0);
> + else if (hpd_link_status == ISR_HPD_REPLUG_COUNT) {
> msm_dp_hpd_plug_handle(dp, 0);
> - else if (msm_dp_display->link_ready && status == connector_status_disconnected)
> msm_dp_hpd_unplug_handle(dp, 0);
> + } else if ((!msm_dp_display->internal_hpd ||
> + hpd_link_status == ISR_DISCONNECTED) &&
> + status == connector_status_disconnected)
> + msm_dp_hpd_unplug_handle(dp, 0);
> +
> + if (msm_dp_display->internal_hpd)
> + pm_runtime_put_sync(&msm_dp_display->pdev->dev);
> }
>
> --
> 2.50.1
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list