[PATCH v2 3/7] drm/msm/dsi_phy_28nm_8960: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series. The change to use clamp_t() was
done manually.

Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 32 ++++++++++++-------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index f3643320ff2f2bae5301bb94f1fe19fa03db584c..8dcce9581dc38730ab725e0e435ab93a04c527ed 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -231,21 +231,19 @@ static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw)
 	pll_28nm->phy->pll_on = false;
 }
 
-static long dsi_pll_28nm_clk_round_rate(struct clk_hw *hw,
-		unsigned long rate, unsigned long *parent_rate)
+static int dsi_pll_28nm_clk_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
 {
 	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
 
-	if      (rate < pll_28nm->phy->cfg->min_pll_rate)
-		return  pll_28nm->phy->cfg->min_pll_rate;
-	else if (rate > pll_28nm->phy->cfg->max_pll_rate)
-		return  pll_28nm->phy->cfg->max_pll_rate;
-	else
-		return rate;
+	req->rate = clamp_t(unsigned long, req->rate,
+			    pll_28nm->phy->cfg->min_pll_rate, pll_28nm->phy->cfg->max_pll_rate);
+
+	return 0;
 }
 
 static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
-	.round_rate = dsi_pll_28nm_clk_round_rate,
+	.determine_rate = dsi_pll_28nm_clk_determine_rate,
 	.set_rate = dsi_pll_28nm_clk_set_rate,
 	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
 	.prepare = dsi_pll_28nm_vco_prepare,
@@ -296,18 +294,20 @@ static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
 		return 8;
 }
 
-static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *prate)
+static int clk_bytediv_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
 {
 	unsigned long best_parent;
 	unsigned int factor;
 
-	factor = get_vco_mul_factor(rate);
+	factor = get_vco_mul_factor(req->rate);
+
+	best_parent = req->rate * factor;
+	req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
 
-	best_parent = rate * factor;
-	*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+	req->rate = req->best_parent_rate / factor;
 
-	return *prate / factor;
+	return 0;
 }
 
 static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -328,7 +328,7 @@ static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
 
 /* Our special byte clock divider ops */
 static const struct clk_ops clk_bytediv_ops = {
-	.round_rate = clk_bytediv_round_rate,
+	.determine_rate = clk_bytediv_determine_rate,
 	.set_rate = clk_bytediv_set_rate,
 	.recalc_rate = clk_bytediv_recalc_rate,
 };

-- 
2.50.1