[PATCH v8 11/13] drm/atomic-helper: Separate out bridge pre_enable/post_disable from enable/disable

[Tomi Valkeinen]

Hi,

On 26/01/2025 21:15, Aradhya Bhatia wrote:
> The encoder-bridge ops occur by looping over the new connector states of
> the display pipelines. The enable sequence runs as follows -
> 
> 	- pre_enable(bridge),
> 	- enable(encoder),
> 	- enable(bridge),
> 
> while the disable sequnce runs as follows -
> 
> 	- disable(bridge),
> 	- disable(encoder),
> 	- post_disable(bridge).
> 
> Separate out the pre_enable(bridge), and the post_disable(bridge)
> operations into separate functions each.
> 
> This patch keeps the sequence same for any singular disaplay pipe, but
> changes the sequence across multiple display pipelines.
> 
> This patch is meant to be an interim patch, to cleanly pave the way for
> the sequence re-ordering patch, and maintain bisectability in the
> process.
> 
> Signed-off-by: Aradhya Bhatia <aradhya.bhatia at linux.dev>
> ---
>   drivers/gpu/drm/drm_atomic_helper.c | 92 +++++++++++++++++++++++++++--
>   1 file changed, 88 insertions(+), 4 deletions(-)

With the issue Jayesh pointed out fixed:

Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>

  Tomi