[PATCH 2/5] pmdomain: sunxi: add H6 PRCM PPU driver
Jernej Škrabec
jernej.skrabec at gmail.com
Fri Feb 21 18:10:33 UTC 2025
Dne petek, 21. februar 2025 ob 01:57:59 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> The Allwinner Power Reset Clock Management (RPCM) block contains a few
> bits that control some power domains. The most prominent one is the one
> for the Mali GPU. On the Allwinner H6 this domain is enabled at reset, so
> we didn't care about it so far, but the H616 defaults to it being disabled.
>
> Add a power domain driver for those bits. Some BSP code snippets and
> some spare documentation describe three bits, slightly different between
> the H6 and H616, so add three power domains for each SoC, connected to
> their compatible string.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/pmdomain/sunxi/Kconfig | 10 +
> drivers/pmdomain/sunxi/Makefile | 1 +
> drivers/pmdomain/sunxi/sun50i-h6-prcm-ppu.c | 191 ++++++++++++++++++++
> 3 files changed, 202 insertions(+)
> create mode 100644 drivers/pmdomain/sunxi/sun50i-h6-prcm-ppu.c
>
> diff --git a/drivers/pmdomain/sunxi/Kconfig b/drivers/pmdomain/sunxi/Kconfig
> index 17781bf8d86d7..43eecb3ea9819 100644
> --- a/drivers/pmdomain/sunxi/Kconfig
> +++ b/drivers/pmdomain/sunxi/Kconfig
> @@ -8,3 +8,13 @@ config SUN20I_PPU
> help
> Say y to enable the PPU power domain driver. This saves power
> when certain peripherals, such as the video engine, are idle.
> +
> +config SUN50I_H6_PRCM_PPU
> + tristate "Allwinner H6 PRCM power domain driver"
> + depends on ARCH_SUNXI || COMPILE_TEST
> + depends on PM
> + select PM_GENERIC_DOMAINS
> + help
> + Say y to enable the Allwinner H6/H616 PRCM power domain driver.
> + This is required to enable the Mali GPU in the H616 SoC, it is
> + optional for the H6.
> diff --git a/drivers/pmdomain/sunxi/Makefile b/drivers/pmdomain/sunxi/Makefile
> index ec1d7a2fb21db..c1343e1237599 100644
> --- a/drivers/pmdomain/sunxi/Makefile
> +++ b/drivers/pmdomain/sunxi/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_SUN20I_PPU) += sun20i-ppu.o
> +obj-$(CONFIG_SUN50I_H6_PRCM_PPU) += sun50i-h6-prcm-ppu.o
> diff --git a/drivers/pmdomain/sunxi/sun50i-h6-prcm-ppu.c b/drivers/pmdomain/sunxi/sun50i-h6-prcm-ppu.c
> new file mode 100644
> index 0000000000000..1c6b0c78b222d
> --- /dev/null
> +++ b/drivers/pmdomain/sunxi/sun50i-h6-prcm-ppu.c
> @@ -0,0 +1,191 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) Arm Ltd. 2024
> + *
> + * Allwinner H6/H616 PRCM power domain driver.
> + * This covers a few registers inside the PRCM (Power Reset Clock Management)
> + * block that control some power rails, most prominently for the Mali GPU.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/reset.h>
> +
> +/*
> + * The PRCM block covers multiple devices, starting with some clocks,
> + * then followed by the power rails.
> + * The clocks are covered by a different driver, so this driver's MMIO range
> + * starts later in the PRCM MMIO frame, not at the beginning of it.
> + * To keep the register offsets consistent with other PRCM documentation,
> + * express the registers relative to the beginning of the whole PRCM, and
> + * subtract the PPU offset this driver is bound to.
> + */
> +#define PD_H6_PPU_OFFSET 0x250
> +#define PD_H6_VDD_SYS_REG 0x250
> +#define PD_H616_ANA_VDD_GATE BIT(4)
> +#define PD_H6_CPUS_VDD_GATE BIT(3)
> +#define PD_H6_AVCC_VDD_GATE BIT(2)
> +#define PD_H6_GPU_REG 0x254
> +#define PD_H6_GPU_GATE BIT(0)
> +
> +struct sun50i_h6_ppu_pd {
> + struct generic_pm_domain genpd;
> + void __iomem *reg;
> + u32 gate_mask;
> + bool negated;
> +};
> +
> +#define FLAG_PPU_ALWAYS_ON BIT(0)
> +#define FLAG_PPU_NEGATED BIT(1)
> +
> +struct sun50i_h6_ppu_desc {
> + const char *name;
> + u32 offset;
> + u32 mask;
> + unsigned int flags;
> +};
> +
> +struct sun50i_h6_ppu_desc sun50i_h6_ppus[] = {
> + { "AVCC", PD_H6_VDD_SYS_REG, PD_H6_AVCC_VDD_GATE },
> + { "CPUS", PD_H6_VDD_SYS_REG, PD_H6_CPUS_VDD_GATE },
> + { "GPU", PD_H6_GPU_REG, PD_H6_GPU_GATE },
> + {}
> +};
> +
> +struct sun50i_h6_ppu_desc sun50i_h616_ppus[] = {
> + { "PLL", PD_H6_VDD_SYS_REG, PD_H6_AVCC_VDD_GATE,
> + FLAG_PPU_ALWAYS_ON | FLAG_PPU_NEGATED },
> + { "ANA", PD_H6_VDD_SYS_REG, PD_H616_ANA_VDD_GATE, FLAG_PPU_ALWAYS_ON },
> + { "GPU", PD_H6_GPU_REG, PD_H6_GPU_GATE, FLAG_PPU_NEGATED },
> + {}
> +};
> +#define to_sun50i_h6_ppu_pd(_genpd) \
> + container_of(_genpd, struct sun50i_h6_ppu_pd, genpd)
> +
> +static bool sun50i_h6_ppu_power_status(const struct sun50i_h6_ppu_pd *pd)
> +{
> + bool bit = readl(pd->reg) & pd->gate_mask;
> +
> + return bit ^ pd->negated;
> +}
> +
> +static int sun50i_h6_ppu_pd_set_power(const struct sun50i_h6_ppu_pd *pd,
> + bool set_bit)
> +{
> + u32 reg = readl(pd->reg);
> +
> + if (set_bit)
> + writel(reg | pd->gate_mask, pd->reg);
> + else
> + writel(reg & ~pd->gate_mask, pd->reg);
> +
> + return 0;
> +}
> +
> +static int sun50i_h6_ppu_pd_power_on(struct generic_pm_domain *genpd)
> +{
> + const struct sun50i_h6_ppu_pd *pd = to_sun50i_h6_ppu_pd(genpd);
> +
> + return sun50i_h6_ppu_pd_set_power(pd, !pd->negated);
> +}
> +
> +static int sun50i_h6_ppu_pd_power_off(struct generic_pm_domain *genpd)
> +{
> + const struct sun50i_h6_ppu_pd *pd = to_sun50i_h6_ppu_pd(genpd);
> +
> + return sun50i_h6_ppu_pd_set_power(pd, pd->negated);
> +}
> +
> +static int sun50i_h6_ppu_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct genpd_onecell_data *ppu;
> + struct sun50i_h6_ppu_pd *pds;
> + const struct sun50i_h6_ppu_desc *desc;
> + void __iomem *base;
> + int ret, i, count;
> +
> + desc = of_device_get_match_data(dev);
> + if (!desc)
> + return -EINVAL;
> +
> + for (count = 0; desc[count].name; count++)
> + ;
> +
> + pds = devm_kcalloc(dev, count, sizeof(*pds), GFP_KERNEL);
> + if (!pds)
> + return -ENOMEM;
> +
> + ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
> + if (!ppu)
> + return -ENOMEM;
> +
> + ppu->num_domains = count;
> + ppu->domains = devm_kcalloc(dev, count, sizeof(*ppu->domains),
> + GFP_KERNEL);
> + if (!ppu->domains)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, ppu);
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + for (i = 0; i < count; i++) {
> + struct sun50i_h6_ppu_pd *pd = &pds[i];
> +
> + pd->genpd.name = desc[i].name;
> + pd->genpd.power_off = sun50i_h6_ppu_pd_power_off;
> + pd->genpd.power_on = sun50i_h6_ppu_pd_power_on;
> + if (desc[i].flags & FLAG_PPU_ALWAYS_ON)
> + pd->genpd.flags = GENPD_FLAG_ALWAYS_ON;
> + pd->negated = !!(desc[i].flags & FLAG_PPU_NEGATED);
> + pd->reg = base + desc[i].offset - PD_H6_PPU_OFFSET;
> + pd->gate_mask = desc[i].mask;
> +
> + ret = pm_genpd_init(&pd->genpd, NULL,
> + !sun50i_h6_ppu_power_status(pd));
> + if (ret) {
> + dev_warn(dev, "Failed to add GPU power domain: %d\n", ret);
I suppose you want to replace "GPU" with desc[i].name.
Otherwise it looks good to me, but I'd like to hear a comment from genpd maintainers.
Best regards,
Jernej
> + return ret;
> + }
> + ppu->domains[i] = &pd->genpd;
> + }
> +
> + ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
> + if (ret)
> + dev_warn(dev, "Failed to add provider: %d\n", ret);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sun50i_h6_ppu_of_match[] = {
> + { .compatible = "allwinner,sun50i-h6-prcm-ppu",
> + .data = &sun50i_h6_ppus },
> + { .compatible = "allwinner,sun50i-h616-prcm-ppu",
> + .data = &sun50i_h616_ppus },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, sun50i_h6_ppu_of_match);
> +
> +static struct platform_driver sun50i_h6_ppu_driver = {
> + .probe = sun50i_h6_ppu_probe,
> + .driver = {
> + .name = "sun50i-h6-prcm-ppu",
> + .of_match_table = sun50i_h6_ppu_of_match,
> + /* Power domains cannot be removed while they are in use. */
> + .suppress_bind_attrs = true,
> + },
> +};
> +module_platform_driver(sun50i_h6_ppu_driver);
> +
> +MODULE_AUTHOR("Andre Przywara <andre.przywara at arm.com>");
> +MODULE_DESCRIPTION("Allwinner H6 PRCM power domain driver");
> +MODULE_LICENSE("GPL");
>
More information about the dri-devel
mailing list