[PATCH 4/5] drm/mediatek: Add MDP-RSZ component support for MT8196
CK Hu (胡俊光)
ck.hu at mediatek.com
Mon Feb 24 02:07:30 UTC 2025
On Sun, 2025-02-23 at 17:52 +0000, Sunny Shen (沈姍姍) wrote:
> On Mon, 2025-02-17 at 06:04 +0000, CK Hu (胡俊光) wrote:
> > On Tue, 2025-02-11 at 10:52 +0800, Sunny Shen wrote:
> > > Add MDP-RSZ component support for MT8196.
> > >
> > > Signed-off-by: Sunny Shen <sunny.shen at mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 24
> > > ++++++++++++++++++++++++
> > > drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 1 +
> > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> > > 3 files changed, 27 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_ddp_comp.c
> > > b/drivers/gpu/drm/mediatek/mtk_ddp_comp.c
> > > index 7f09a8977965..65878d3fe8a9 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_ddp_comp.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_ddp_comp.c
> > > @@ -46,6 +46,10 @@
> > > #define DSC_BYPASS BIT(4)
> > > #define DSC_UFOE_SEL BIT(16)
> > >
> > > +#define DISP_REG_MDP_RSZ_EN 0x0000
> >
> > Do you config resizer in bypass mode so you need not to enable it?
>
> Yes, it's bypass mode
> To use the hardware path for PQ,
> we need set this resizer to bypass mode because the path mux design of
> the MT8196
>
> >
> > > +#define DISP_REG_MDP_RSZ_INPUT_SIZE 0x0010
> > > +#define DISP_REG_MDP_RSZ_OUTPUT_SIZE 0x0014
> > > +
> > > #define DISP_REG_OD_EN 0x0000
> > > #define DISP_REG_OD_CFG 0x0020
> > > #define OD_RELAYMODE BIT(0)
> > > @@ -235,6 +239,18 @@ static void mtk_od_start(struct device *dev)
> > > writel(1, priv->regs + DISP_REG_OD_EN);
> > > }
> > >
> > > +static void mtk_mdp_rsz_config(struct device *dev, unsigned int w,
> > > + unsigned int h, unsigned int
> > > vrefresh,
> > > + unsigned int bpc, struct cmdq_pkt
> > > *cmdq_pkt)
> > > +{
> > > + struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> > > +
> > > + mtk_ddp_write(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> > > + DISP_REG_MDP_RSZ_INPUT_SIZE);
> > > + mtk_ddp_write(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> > > + DISP_REG_MDP_RSZ_OUTPUT_SIZE);
> >
> > Do you config resizer in bypass mode so width and height is set to
> > zero?
>
> Yes, we set resizer's width and height to 0 and use the bypass mode
Add comment for this so others would know why not enable it and why set width/height to zero.
Regards,
CK
>
> >
> > Regards,
> > CK
> >
> > > +}
> > > +
> > > static void mtk_postmask_config(struct device *dev, unsigned int
> > > w,
> > > unsigned int h, unsigned int
> > > vrefresh,
> > > unsigned int bpc, struct cmdq_pkt
> > > *cmdq_pkt)
> > > @@ -391,6 +407,12 @@ static const struct mtk_ddp_comp_funcs
> > > ddp_ovlsys_adaptor = {
> > > .get_num_formats = mtk_ovlsys_adaptor_get_num_formats,
> > > };
> > >
> > > +static const struct mtk_ddp_comp_funcs ddp_mdp_rsz = {
> > > + .clk_enable = mtk_ddp_clk_enable,
> > > + .clk_disable = mtk_ddp_clk_disable,
> > > + .config = mtk_mdp_rsz_config,
> > > +};
> > > +
> > > static const struct mtk_ddp_comp_funcs ddp_postmask = {
> > > .clk_enable = mtk_ddp_clk_enable,
> > > .clk_disable = mtk_ddp_clk_disable,
> > > @@ -454,6 +476,7 @@ static const char * const
> > > mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
> > > [MTK_DISP_DITHER] = "dither",
> > > [MTK_DISP_DSC] = "dsc",
> > > [MTK_DISP_GAMMA] = "gamma",
> > > + [MTK_DISP_MDP_RSZ] = "mdp-rsz",
> > > [MTK_DISP_MERGE] = "merge",
> > > [MTK_DISP_MUTEX] = "mutex",
> > > [MTK_DISP_OD] = "od",
> > > @@ -515,6 +538,7 @@ static const struct mtk_ddp_comp_match
> > > mtk_ddp_matches[DDP_COMPONENT_DRM_ID_MAX]
> > > [DDP_COMPONENT_DSI2] = {
> > > MTK_DSI, 2, &ddp_dsi },
> > > [DDP_COMPONENT_DSI3] = {
> > > MTK_DSI, 3, &ddp_dsi },
> > > [DDP_COMPONENT_GAMMA] = {
> > > MTK_DISP_GAMMA, 0, &ddp_gamma },
> > > + [DDP_COMPONENT_MDP_RSZ0] = {
> > > MTK_DISP_MDP_RSZ, 0, &ddp_mdp_rsz},
> > > [DDP_COMPONENT_MERGE0] = {
> > > MTK_DISP_MERGE, 0, &ddp_merge },
> > > [DDP_COMPONENT_MERGE1] = {
> > > MTK_DISP_MERGE, 1, &ddp_merge },
> > > [DDP_COMPONENT_MERGE2] = {
> > > MTK_DISP_MERGE, 2, &ddp_merge },
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > > b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > > index badb42bd4f7c..87f573fcc903 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > > @@ -36,6 +36,7 @@ enum mtk_ddp_comp_type {
> > > MTK_DISP_OVLSYS_ADAPTOR,
> > > MTK_DISP_OVL_2L,
> > > MTK_DISP_OVL_ADAPTOR,
> > > + MTK_DISP_MDP_RSZ,
> > > MTK_DISP_POSTMASK,
> > > MTK_DISP_PWM,
> > > MTK_DISP_RDMA,
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > index 50f5f81a7da1..b810a197f58b 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > @@ -885,6 +885,8 @@ static const struct of_device_id
> > > mtk_ddp_comp_dt_ids[] = {
> > > .data = (void *)MTK_DISP_GAMMA, },
> > > { .compatible = "mediatek,mt8195-disp-gamma",
> > > .data = (void *)MTK_DISP_GAMMA, },
> > > + { .compatible = "mediatek,mt8196-disp-mdp-rsz",
> > > + .data = (void *)MTK_DISP_MDP_RSZ },
> > > { .compatible = "mediatek,mt8195-disp-merge",
> > > .data = (void *)MTK_DISP_MERGE },
> > > { .compatible = "mediatek,mt2701-disp-mutex",
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20250224/dc0d89dc/attachment-0001.htm>
More information about the dri-devel
mailing list