[PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface

[Dmitry Baryshkov]

On Tue, Feb 25, 2025 at 05:48:21PM +0530, Ayushi Makhija wrote:
> Enable both DSI to DP bridge ports on SA8775P Ride plaftrom.
> 
> Signed-off-by: Ayushi Makhija <quic_amakhija at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 66 +++++++++++++++++++++-
>  1 file changed, 64 insertions(+), 2 deletions(-)

Please squash into the previous patch. It doesn't make a lot of sense separately.

> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> index 151f66512303..02d8a9c2c909 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> @@ -128,6 +128,30 @@ dp1_connector_in: endpoint {
>  			};
>  		};
>  	};
> +
> +	dsi0-connector {

dpN-connector. It is not DSI.

> +		compatible = "dp-connector";
> +		label = "DSI0";

Is it an actual label on it?

> +		type = "full-size";
> +
> +		port {
> +			dsi0_connector_in: endpoint {
> +				remote-endpoint = <&anx7625_1_out>;
> +			};
> +		};
> +	};
> +
-- 
With best wishes
Dmitry