[PATCH v4 2/4] drm/bridge: imx8mp-hdmi-tx: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR

[Liu Ying]

On 01/06/2025, Marek Vasut wrote:
> The dw-hdmi output_port is set to 1 in order to look for a connector
> next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
> The output_port set to 1 makes the DW HDMI driver core look up the
> next bridge in DT, where the next bridge is often the hdmi-connector .
> 
> Similar to 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
> 
> Note that looking at the upstream arch/arm64/boot/dts/freescale/imx8mp*dts ,
> the oldest commit which adds HDMI support is commit:
> 
> 3e67a1ddd56d ("arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL")
> 
> That already contains the HDMI connector node. Most follow up additions
> of HDMI support to another devices has been a variation of the same commit,
> including connector node, which is the proper way of eanbling HDMI on the
> i.MX8MP.
> 
> The rest should be covered by output_port_optional which should make systems
> with DTs without HDMI connector node work, but such DTs should be updated and
> the HDMI connector node should be added.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Andrzej Hajda <andrzej.hajda at intel.com>
> Cc: David Airlie <airlied at gmail.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
> Cc: Jonas Karlman <jonas at kwiboo.se>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Liu Ying <victor.liu at nxp.com>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Maxime Ripard <mripard at kernel.org>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> Cc: Robert Foss <rfoss at kernel.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Simona Vetter <simona at ffwll.ch>
> Cc: Stefan Agner <stefan at agner.ch>
> Cc: Thomas Zimmermann <tzimmermann at suse.de>
> Cc: dri-devel at lists.freedesktop.org
> Cc: imx at lists.linux.dev
> Cc: linux-arm-kernel at lists.infradead.org
> ---
> V2: No change
> V3: - Update commit message
>     - Move select DRM_DISPLAY_CONNECTOR to DRM_IMX8MP_DW_HDMI_BRIDGE
>     - Enable output_port_optional
> V4: - Remove select DRM_DISPLAY_CONNECTOR
> ---
>  drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> index 1e7a789ec2890..3d63200e468bf 100644
> --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
> @@ -101,6 +101,8 @@ static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
>  	plat_data->phy_name = "SAMSUNG HDMI TX PHY";
>  	plat_data->priv_data = hdmi;
>  	plat_data->phy_force_vendor = true;
> +	plat_data->output_port = 1;

How would you keep the behaviour of the connector after adding
DRM_BRIDGE_ATTACH_NO_CONNECTOR in display controller driver?
dw_hdmi_connector_create() implements CEC support at least.  This was pointed
out in v2 and v3 comments.

https://lore.kernel.org/all/vvsj6ri2ke25nzocbq736yv7rphzma6pn3yk2uh7iu43zfe2sa@2fwye4k4w6he/

> +	plat_data->output_port_optional = true;
>  
>  	hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
>  	if (IS_ERR(hdmi->dw_hdmi))

-- 
Regards,
Liu Ying