[PATCH 1/2] ARM: dts: imx7s: Move csi-mux to below root
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Jan 7 10:06:39 UTC 2025
Hi Alexander,
Thank you for the patch.
On Tue, Jan 07, 2025 at 10:49:41AM +0100, Alexander Stein wrote:
> fsl,imx-iomuxc-gpr.yaml only contains the mux-controller but the actual
> video-mux is not part of it. So move it below root node.
> Fixes the dtbs_check warning:
> arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: iomuxc-gpr at 30340000: 'csi-mux' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
>
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 56 ++++++++++++++--------------
> 1 file changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
> index 22dd72499ef27..2629968001a74 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
> @@ -176,6 +176,34 @@ timer {
> <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
> };
>
> + video_mux: csi-mux {
> + compatible = "video-mux";
> + mux-controls = <&mux 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + port at 0 {
> + reg = <0>;
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + csi_mux_from_mipi_vc0: endpoint {
> + remote-endpoint = <&mipi_vc0_to_csi_mux>;
> + };
> + };
> +
> + port at 2 {
> + reg = <2>;
> +
> + csi_mux_to_csi: endpoint {
> + remote-endpoint = <&csi_from_csi_mux>;
> + };
> + };
> + };
> +
> soc: soc {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -529,34 +557,6 @@ mux: mux-controller {
> #mux-control-cells = <1>;
> mux-reg-masks = <0x14 0x00000010>;
> };
> -
> - video_mux: csi-mux {
> - compatible = "video-mux";
> - mux-controls = <&mux 0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> -
> - port at 0 {
> - reg = <0>;
> - };
> -
> - port at 1 {
> - reg = <1>;
> -
> - csi_mux_from_mipi_vc0: endpoint {
> - remote-endpoint = <&mipi_vc0_to_csi_mux>;
> - };
> - };
> -
> - port at 2 {
> - reg = <2>;
> -
> - csi_mux_to_csi: endpoint {
> - remote-endpoint = <&csi_from_csi_mux>;
> - };
> - };
> - };
> };
>
> ocotp: efuse at 30350000 {
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list