[RFC v3 05/18] pmdomain: thead: Add power-domain driver for TH1520

[Krzysztof Kozlowski]

On 22/01/2025 12:26, Michal Wilczynski wrote:
>>>
>>> These power-domain constants are defined by the AON firmware protocol,
>>> which dictates the exact IDs (e.g., 1 for NPU). They are not just array
>>> indices; we must use these specific values to communicate with the
>>> firmware correctly. Using array indices starting with 1 would be
>>> unusual.
>>
>> Then that's a no. Binding constants do not represent values used by your
>> hardware. The binding constant should start from 0.
> 
> Would it be a problem if those overlapped ? There is one more value that

No, I just don't care about hardware constants here. Use the bindings
constants in your driver at least as abstract IDs or these are not
suitable for bindings.

Best regards,
Krzysztof