[PATCH 1/3] drm/amdgpu: move GTT to SHM after eviction for hibernation
Samuel Zhang
guoqzhan at amd.com
Wed Jul 2 07:28:50 UTC 2025
On 2025/7/1 16:22, Christian König wrote:
> On 01.07.25 10:18, Zhang, GuoQing (Sam) wrote:
>> [AMD Official Use Only - AMD Internal Distribution Only]
>>
>>
>> Hi Christian,
>>
>>
>>
>> Thank you for the feedback.
>>
>>
>>
>> For “return ret < 0 ? ret : 0;”, it is equivalent to “return ret;” since ret is always <= 0 after the loop.
> No it isn't.
>
> ttm_global_swapout() returns the number of pages swapped out and only a negative error code if something went wrong.
/**
* move GTT BOs to shmem for hibernation.
*
* returns 0 on success, negative on failure.
*/
int ttm_device_prepare_hibernation(void)
{
struct ttm_operation_ctx ctx = {
.interruptible = false,
.no_wait_gpu = false,
.force_alloc = true
};
int ret;
do {
ret = ttm_global_swapout(&ctx, GFP_KERNEL);
} while (ret > 0);
return ret;
}
This is the new code version.
If ttm_global_swapout() return positive number, the while loop will
continue to the next iteration.
The while loop stops only when ttm_global_swapout() returns 0 or
negative number. In both case, the new function can just return the ret.
The ret values printed in the do while loop:
[ 53.745892] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 512
[ 53.950975] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 35840
[ 53.951713] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 9
[ 67.712196] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 2187264
[ 67.713726] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 512
[ 67.759212] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 32768
[ 67.761946] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1024
[ 67.762685] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 85
[ 67.763518] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 175
[ 67.767318] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 2367
[ 67.767942] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
[ 67.768499] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
[ 67.769054] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
...
[ 67.783554] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
[ 67.785755] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
[ 67.788607] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 1
[ 67.789906] [TTM DEVICE] ttm_device_prepare_hibernation:164 ret 0
Regards
Sam
>
> And it's probably not a good idea to return that from the new function.
>
> Regards,
> Christian.
>
>>
>>
>> For all other comments, I will revise the patch accordingly in v2.
>>
>>
>>
>> Regards
>>
>> Sam
>>
>>
>>
>>
>>
>> *From: *Koenig, Christian <Christian.Koenig at amd.com>
>> *Date: *Monday, June 30, 2025 at 19:54
>> *To: *Zhang, GuoQing (Sam) <GuoQing.Zhang at amd.com>, rafael at kernel.org <rafael at kernel.org>, len.brown at intel.com <len.brown at intel.com>, pavel at kernel.org <pavel at kernel.org>, Deucher, Alexander <Alexander.Deucher at amd.com>, Limonciello, Mario <Mario.Limonciello at amd.com>, Lazar, Lijo <Lijo.Lazar at amd.com>
>> *Cc: *Zhao, Victor <Victor.Zhao at amd.com>, Chang, HaiJun <HaiJun.Chang at amd.com>, Ma, Qing (Mark) <Qing.Ma at amd.com>, amd-gfx at lists.freedesktop.org <amd-gfx at lists.freedesktop.org>, dri-devel at lists.freedesktop.org <dri-devel at lists.freedesktop.org>, linux-pm at vger.kernel.org <linux-pm at vger.kernel.org>, linux-kernel at vger.kernel.org <linux-kernel at vger.kernel.org>
>> *Subject: *Re: [PATCH 1/3] drm/amdgpu: move GTT to SHM after eviction for hibernation
>>
>> On 30.06.25 12:41, Samuel Zhang wrote:
>>> When hibernate with data center dGPUs, huge number of VRAM BOs evicted
>>> to GTT and takes too much system memory. This will cause hibernation
>>> fail due to insufficient memory for creating the hibernation image.
>>>
>>> Move GTT BOs to shmem in KMD, then shmem to swap disk in kernel
>>> hibernation code to make room for hibernation image.
>> This should probably be two patches, one for TTM and then an amdgpu patch to forward the event.
>>
>>> Signed-off-by: Samuel Zhang <guoqing.zhang at amd.com>
>>> ---
>>> drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 13 ++++++++++++-
>>> drivers/gpu/drm/ttm/ttm_resource.c | 18 ++++++++++++++++++
>>> include/drm/ttm/ttm_resource.h | 1 +
>>> 3 files changed, 31 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
>>> index 4d57269c9ca8..5aede907a591 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
>>> @@ -2889,6 +2889,7 @@ int amdgpu_fill_buffer(struct amdgpu_bo *bo,
>>> int amdgpu_ttm_evict_resources(struct amdgpu_device *adev, int mem_type)
>>> {
>>> struct ttm_resource_manager *man;
>>> + int r;
>>>
>>> switch (mem_type) {
>>> case TTM_PL_VRAM:
>>> @@ -2903,7 +2904,17 @@ int amdgpu_ttm_evict_resources(struct amdgpu_device *adev, int mem_type)
>>> return -EINVAL;
>>> }
>>>
>>> - return ttm_resource_manager_evict_all(&adev->mman.bdev, man);
>>> + r = ttm_resource_manager_evict_all(&adev->mman.bdev, man);
>>> + if (r) {
>>> + DRM_ERROR("Failed to evict memory type %d\n", mem_type);
>>> + return r;
>>> + }
>>> + if (adev->in_s4 && mem_type == TTM_PL_VRAM) {
>>> + r = ttm_resource_manager_swapout();
>>> + if (r)
>>> + DRM_ERROR("Failed to swap out, %d\n", r);
>>> + }
>>> + return r;
>>> }
>>>
>>> #if defined(CONFIG_DEBUG_FS)
>>> diff --git a/drivers/gpu/drm/ttm/ttm_resource.c b/drivers/gpu/drm/ttm/ttm_resource.c
>>> index fd41b56e2c66..07b1f5a5afc2 100644
>>> --- a/drivers/gpu/drm/ttm/ttm_resource.c
>>> +++ b/drivers/gpu/drm/ttm/ttm_resource.c
>>> @@ -534,6 +534,24 @@ void ttm_resource_manager_init(struct ttm_resource_manager *man,
>>> }
>>> EXPORT_SYMBOL(ttm_resource_manager_init);
>>>
>>> +int ttm_resource_manager_swapout(void)
>> This needs documentation, better placement and a better name.
>>
>> First of all put it into ttm_device.c instead of the resource manager.
>>
>> Then call it something like ttm_device_prepare_hibernation or similar.
>>
>>
>>> +{
>>> + struct ttm_operation_ctx ctx = {
>>> + .interruptible = false,
>>> + .no_wait_gpu = false,
>>> + .force_alloc = true
>>> + };
>>> + int ret;
>>> +
>>> + while (true) {
>> Make that:
>>
>> do {
>> ret = ...
>> } while (ret > 0);
>>
>>> + ret = ttm_global_swapout(&ctx, GFP_KERNEL);
>>> + if (ret <= 0)
>>> + break;
>>> + }
>>> + return ret;
>> It's rather pointless to return the number of swapped out pages.
>>
>> Make that "return ret < 0 ? ret : 0;
>>
>> Regards,
>> Christian.
>>
>>> +}
>>> +EXPORT_SYMBOL(ttm_resource_manager_swapout);
>>> +
>>> /*
>>> * ttm_resource_manager_evict_all
>>> *
>>> diff --git a/include/drm/ttm/ttm_resource.h b/include/drm/ttm/ttm_resource.h
>>> index b873be9597e2..46181758068e 100644
>>> --- a/include/drm/ttm/ttm_resource.h
>>> +++ b/include/drm/ttm/ttm_resource.h
>>> @@ -463,6 +463,7 @@ void ttm_resource_manager_init(struct ttm_resource_manager *man,
>>>
>>> int ttm_resource_manager_evict_all(struct ttm_device *bdev,
>>> struct ttm_resource_manager *man);
>>> +int ttm_resource_manager_swapout(void);
>>>
>>> uint64_t ttm_resource_manager_usage(struct ttm_resource_manager *man);
>>> void ttm_resource_manager_debug(struct ttm_resource_manager *man,
More information about the dri-devel
mailing list