[PATCH resend] drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Jul 4 10:31:44 UTC 2025


On Thu, Jul 03, 2025 at 04:38:24PM +0200, Hans de Goede wrote:
> From: Hans de Goede <hdegoede at redhat.com>
> 
> It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary
> for some DSI panel's with version 2 mipi-sequences too.
> 
> Specifically the Acer Iconia One 8 A1-840 (not to be confused with the
> A1-840FHD which is different) has the following sequences:
> 
> BDB block 53 (1284 bytes) - MIPI sequence block:
> 	Sequence block version v2
> 	Panel 0 *
> 
> Sequence 2 - MIPI_SEQ_INIT_OTP
> 	GPIO index 9, source 0, set 0 (0x00)
> 	Delay: 50000 us
> 	GPIO index 9, source 0, set 1 (0x01)
> 	Delay: 6000 us
> 	GPIO index 9, source 0, set 0 (0x00)
> 	Delay: 6000 us
> 	GPIO index 9, source 0, set 1 (0x01)
> 	Delay: 25000 us
> 	Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
> 	Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
> 	...
> 	Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
> 	Delay: 120000 us
> 
> Sequence 4 - MIPI_SEQ_DISPLAY_OFF
> 	Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
> 	Delay: 105000 us
> 	Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
> 	Delay: 10000 us
> 
> Sequence 5 - MIPI_SEQ_ASSERT_RESET
> 	Delay: 10000 us
> 	GPIO index 9, source 0, set 0 (0x00)
> 
> Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
> is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
> the fixup from vlv_fixup_mipi_sequences() fixes up.
> 
> Extend it to also apply to v2 sequences, this fixes the panel not working
> on the Acer Iconia One 8 A1-840.

Do we have the full VBT for this machine already in some bug? If not,
please file a new issue with the VBT attached for posterity.

> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  drivers/gpu/drm/i915/display/intel_bios.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
> index ba7b8938b17c..166ee11831ab 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.c
> +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> @@ -1938,7 +1938,7 @@ static int get_init_otp_deassert_fragment_len(struct intel_display *display,
>  	int index, len;
>  
>  	if (drm_WARN_ON(display->drm,
> -			!data || panel->vbt.dsi.seq_version != 1))
> +			!data || panel->vbt.dsi.seq_version >= 3))
>  		return 0;
>  
>  	/* index = 1 to skip sequence byte */
> @@ -1961,7 +1961,7 @@ static int get_init_otp_deassert_fragment_len(struct intel_display *display,
>  }
>  
>  /*
> - * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence.
> + * Some v1/v2 VBT MIPI sequences do the deassert in the init OTP sequence.
>   * The deassert must be done before calling intel_dsi_device_ready, so for
>   * these devices we split the init OTP sequence into a deassert sequence and
>   * the actual init OTP part.
> @@ -1972,9 +1972,9 @@ static void vlv_fixup_mipi_sequences(struct intel_display *display,
>  	u8 *init_otp;
>  	int len;
>  
> -	/* Limit this to v1 vid-mode sequences */
> +	/* Limit this to v1/v2 vid-mode sequences */
>  	if (panel->vbt.dsi.config->is_cmd_mode ||
> -	    panel->vbt.dsi.seq_version != 1)
> +	    panel->vbt.dsi.seq_version >= 3)
>  		return;
>  
>  	/* Only do this if there are otp and assert seqs and no deassert seq */
> -- 
> 2.49.0

-- 
Ville Syrjälä
Intel


More information about the dri-devel mailing list