[PATCH 1/5] drm/rockchip: dw_hdmi_qp: Provide CEC IRQ in dw_hdmi_qp_plat_data

[Heiko Stübner]

Hi Cristian,

Am Freitag, 4. Juli 2025, 16:23:22 Mitteleuropäische Sommerzeit schrieb Cristian Ciocaltea:
> In preparation to support the CEC interface of the DesignWare HDMI QP IP
> block, extend the platform data to provide the required IRQ number.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> ---
>  drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 4 ++++
>  include/drm/bridge/dw_hdmi_qp.h                | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
> index 7d531b6f4c098c6c548788dad487ce4613a2f32b..126e556025961e8645f3567b4d7a1c73cc2f2e7f 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
> @@ -539,6 +539,10 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
>  	if (plat_data.main_irq < 0)
>  		return plat_data.main_irq;
>  
> +	plat_data.cec_irq = platform_get_irq_byname(pdev, "cec");
> +	if (plat_data.cec_irq < 0)
> +		return plat_data.cec_irq;
> +
>  	irq = platform_get_irq_byname(pdev, "hpd");
>  	if (irq < 0)
>  		return irq;
> diff --git a/include/drm/bridge/dw_hdmi_qp.h b/include/drm/bridge/dw_hdmi_qp.h
> index e9be6d507ad9cdc55f5c7d6d3ef37eba41f1ce74..b4a9b739734ec7b67013b683fe6017551aa19172 100644
> --- a/include/drm/bridge/dw_hdmi_qp.h
> +++ b/include/drm/bridge/dw_hdmi_qp.h
> @@ -23,6 +23,7 @@ struct dw_hdmi_qp_plat_data {
>  	const struct dw_hdmi_qp_phy_ops *phy_ops;
>  	void *phy_data;
>  	int main_irq;
> +	int cec_irq;
>  };

from a structure point-of-view, I'd expect the series to be something like:

(1) drm/bridge: dw-hdmi-qp: Add CEC support
    -> including adding the cec_irq to dw_hdmi_qp_plat_data
(2) drm/bridge: dw-hdmi-qp: Fixup timer base setup
    -> including adding the ref_clk_rate to dw_hdmi_qp_plat_data
(3) drm/rockchip: dw_hdmi_qp: Provide CEC IRQ in dw_hdmi_qp_plat_data
(4) drm/rockchip: dw_hdmi_qp: Provide ref clock rate in dw_hdmi_qp_plat_data
(5) arm64: defconfig: Enable DW HDMI QP CEC support

The patches adding the generic functionality to the bridge should also
include the needed elements and not depend on platform-specific patches.


Heiko